• Journal of the Korea Society of Computer and Information
• /
• v.20 no.12
• /
• pp.37-44
• /
• 2015

In this paper, we propose the assistance method to enable safe driving through analysis of dangerous driving behavior using real-time alarm by vehicle speed, azimuth data and smartphone. For this method, smartphone is receiving driving data from digital tachograph using communication. Safe driving habit is a very important issue to commercial vehicle because that driver's long time driving than other vehicle type driver. Existing methods are very inefficient to improve immediately dangerous driving habits during driving because proceed driving behavior analysis after the vehicle operation. We propose the new safe driving assistance method that can prevent traffic accidents by real-time and improve the driver's wrong driving habits through real-time dangerous driving behavior analysis and notification the result to the driver. We have confirmed that the method in this paper will help to improve driving habits and can be applied through the proposed method implementation and simulation experiment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.72-81
• /
• 2018

In this study, the sinusoidal-wave driving method, six-step driving method, and twelve-step driving method, which can be used in an inverter for permanent-magnet synchronous motors, were simulated, and the results were compared to review their operating performance. These driving methods were classified according to the electrical conduction angle and phase current of the motor. Conventionally, only the transition control technique between the sinusoidal-wave driving method and six-step driving method was studied for the efficiency of the inverter. In this paper, however, comparative analysis was focused on a variety of transition control applications to use the advantages of each driving method. For this purpose, computer simulations for these driving methods were carried out to obtain the motor torque, speed control characteristics, and THD of the motor phase currents. As a result, the sinusoidal-wave driving method showed the best performance in all respects. The six-step driving method has better speed control characteristics than the twelve-step driving method, and the twelve-step driving method has a lower THD of the motor phase currents than the six-step driving method.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.2C no.5
• /
• pp.253-257
• /
• 2002

A new Current-Controlled Driving Method that can drive AC PDPs with low voltage and high luminous efficiency for the sustaining period is presented. In this driving method, the voltage source is connected to a storage capacitor and the stored voltage is delivered to the panel through LC resonance. Thus, this driving method can drive the panel with a voltage source as low as about half of the voltage necessary in the conventional driving methods. The discharge current flowing into the AC PDP is limited in this method. Thus, the power consumption for the discharge is reduced and the discharge input power to output luminance efficiency is improved. Experimental results using this driving method showed that we could drive an AC PDP with a voltage source as low as 146V and that high luminous efficiency of 1.33 1m／W can be achieved.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.2C no.6
• /
• pp.292-296
• /
• 2002

A new sustain driving method for the AC PDP is presented. In this driving method, the voltage source is connected to a storage capacitor, this storage capacitor charges an intermediate capacitor through LC resonance, and the panel is charged from the intermediate capacitor indirectly. In this way, the current flowing into the AC PDP when the sustain discharge occurs is reduced because the current is indirectly supplied from a capacitor, a limited source of charge. Thus, the input power to the output luminance efficiency is improved. Since the voltage supplied to the storage capacitor is doubled through LC resonance, this method call drive an AC PDP with a voltage source of about half of the voltage necessary in the conventional driving methods. The experiments showed that this charge-controlled driving method could drive ail AC PDP with a voltage source of as low as 107V. Using a panel of the conventional structure, luminous efficiency of 1.28 lm/W was achieved.

• Journal of Information Display
• /
• v.5 no.3
• /
• pp.1-7
• /
• 2004

We developed a novel frame interpolation method to interpolate a frame between two successive original frames. Using this method, we are able to apply a double-rate driving method instead of an impulse driving method where a black frame is inserted between two successive original frames. The double-rate driving method enables amelioration of the motion blur of LCDs caused by the characteristics of human vision without reducing the luminosity of the whole screen. The image quality of the double-rate driving method was also found to be better than that of an impulse driving method using our motion picture simulator and an actual panel. Our initial model of our frame interpolation method consists of motion estimation with a maximum matching pixel count estimation function, an area segmentation technique, and motion compensation with variable segmentation threshold. Although salt and pepper noise remained in a portion of an object mainly due to inaccuracy of motion estimation, we verified the validity of our method and the possibility of improvement in hold-type motion blurring.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.2
• /
• pp.55-62
• /
• 2015

In this paper, we proposed the method that enabling warning through real-time analysis of dangerous driving behavior, improving driving habits and safe driving using the digital tachograph. Most of traffic accidents and green drive are closely related of driving habits. These wrong driving habits need to be improved by the real-time analysis, warning and automated method of driving habits. We confirmed the proposed that the method will help support eco-driving, safe driving through real-time analysis of driving behavior and warning through the method implementation and experiment.

• Journal of Information Display
• /
• v.7 no.1
• /
• pp.30-34
• /
• 2006

A sub-field rearrangement driving method has been proposed to reduce a DFC (Dynamic False Contour) phenomenon in plasma display panels. The proposed driving method expresses 256 gray levels with 16 sub-fields, while conventional one uses only 8 sub-fields. Notwithstanding the increase in the number of sub-fields, the display time is similar to the conventional 8 sub-fields driving method by appropriate choosing selective writing and selective erasing for sub-fields.

• Journal of Drive and Control
• /
• v.9 no.2
• /
• pp.15-20
• /
• 2012

Pneumatic cylinder meter-out driving apparatus is used widely because it is clean, lightweight, and can be easily serviced. In this study an estimation method of energy consumption for pneumatic cylinder meter-out driving apparatus is proposed. The proposed method is derived from state equation and energy equation of air, and, the equation of motion of a moving part of a pneumatic cylinder reflecting the characteristics of the meter-out driving. The effectiveness of the proposed method is proved by simulation study and it demonstrates that the proposed method can evaluate the energy consumption quickly and easily when the parameters of the driving apparatus are changed.

• ETRI Journal
• /
• v.45 no.2
• /
• pp.240-253
• /
• 2023

Spatial information is geometrical information combined with the properties of an object. In city areas where unmanned aerial vehicle (UAV) usage demand is high, it is necessary to determine the appropriate driving altitude considering the height of buildings for safe driving. In this study, we propose a data-provision method that generates the driving altitude of UAVs with a pseudo-3D building model. The pseudo-3D building model is developed using high-precision spatial information provided by the National Geographic Information Institute. The proposed method generates the driving altitude of the UAV in terms of tile information, including the UAV's starting and arrival points and a straight line between the two points, and provides the data to users. To evaluate the efficacy of the proposed method, UAV driving altitude information was generated using data of 763 551 pseudo-3D buildings in Seoul. Subsequently, the generated driving altitude data of the UAV was verified in AirSim. In addition, the execution time of the proposed method and the calculated driving altitude were analyzed.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.2
• /
• pp.167-177
• /
• 2013

Objective: This study aims to compare the usefulness of subjective measures which are comprised of existing methods like NASA-TLX, Bedford-scale and ZEIS and newly developed method like DALI in measuring drivers' mental workload in terms of validity, sensitivity and diagnosticity. Background: Nowadays, with the development of intelligent vehicle and HMI, mental workload of driver has become more and more important. For this reason, the studies on drivers' mental workload about driving situation and the use of information technology equipment such as mobile phones and navigations were conducted intensively. However, the studies on measuring drivers' mental workload were rarely conducted. Moreover, most of studies on comparison of subjective measures were used with performance based measure. However, performance based measures can cause distraction effect with subjective measures. Method: Participants (N=19) were engaged in a driving simulation experiment in 2 driving contexts (downtown driving and highway driving context). The experiment has 2 sessions according to driving contexts. The level of difficulties by driving contexts were adjusted according to existence of intersections, traffic signs and signals, billboards and the number of doublings. Moreover, as criteria of concurrent validity and sensitivity, the EEG data were recorded before and during the sessions. Results: The results indicated that all subjective methods were correlates with EEG in high-way driving. On the contrary to this, in downtown driving, all subjective methods were not correlates with EEG. In terms of sensitivity, multi-dimensional scales (NASA-TLX, DALI) were the only ones to identify differences between high way and downtown driving. Finally, in terms of diagnosticity, DALI was the most suitable method for evaluating drivers' mental workload in driving context. Conclusion: The DALI as newly developed method dedicated to evaluate driver's mental workload was superior in terms of sensitivity and diagnosticity. However, researchers should consider the characteristics of each subjective method synthetically according to research objective by selecting the method in subjective measures. Application: The results of this study could be applied to the intelligent vehicle and next generation of HMI design to decrease mental workload of driver and for the development of new subjective method in vehicle domain.