• 인터넷정보학회논문지
• /
• 제16권6호
• /
• pp.57-67
• /
• 2015

This paper proposes an Fuzzy-based Risk Reasoning Driving Strategy on VANET. Its first reasoning phase consists of a WC_risk reasoning that reasons the risk by using limited road factors such as current weather, density, accident, and construction, a DR_risk reasoning that reasons the risk by combining the driving resistance with the weight value suitable for the environment of highways and national roads, a DS_risk reasoning that judges the collision risk by using the travel direction, speed. and distance of vehicles and pedestrians, and a Total_risk reasoning that computes a final risk by using the three above-mentioned reasoning. Its second speed reduction proposal phase decides the reduction ratio according to the result of Total_risk and the reduction ratio by comparing the regulation speed of road to current vehicle's speed. Its third risk notification phase works in case current driving speed exceeds regulation speed or in case the Total_risk is higher than AV(Average Value). The Risk Notification Phase informs rear vehicles or pedestrians around of a risk according to drivers's response. If drivers use a brake according to the proposed speed reduction, the precedent vehicles transfers Risk Notification Messages to rear vehicles. If they don't use a brake, a current driving vehicle transfers a Risk Message to pedestrians. Therefore, this paper not only prevents collision accident beforehand by reasoning the risk happening to pedestrians and vehicles but also decreases the loss of various resources by reducing traffic jam.

• 한국대기환경학회지
• /
• 제29권6호
• /
• pp.745-756
• /
• 2013

The purpose of this study is to evaluate representativeness of fuel-based emission factors. Twelve light-duty diesel vehicles which meet Euro-3 to 5 legislative emission limits were selected for emission tests. Second-by-second modal emission rates of vehicles were measured on a standard laboratory chassis dynamometer system. An off-cycle driving cycle was developed as a representative Korean real-world on-road driving cycle. Fuel-based emission factors were developed for short trip segments that involved in the selected driving cycle. Each segment was defined to have unit travel distance, which is 1 km, and characterized by its average speed and Relative Positive Acceleration (RPA). Fuel-based $NO_x$ emission factors demonstrate relatively good representativeness in terms of vehicle operation conditions. $NO_x$ emission factors are estimated to be within ${\pm}20%$ of area-wide emission factor under more than 40% of total driving situations. This result implies that the fuel-based $NO_x$ emission factor could be practically implemented into the on-road emission management strategies, such as a remote sensing device (RSD). High emitting vehicles as well as high emitting operating conditions heavily affect on the mean values and distributions of CO and THC emission factors. Few high emitting conditions are pulling up the mean value and biasing the distributions, which weaken representativeness of fuel-based CO and THC emission factors.

• 한국컴퓨터정보학회논문지
• /
• 제19권12호
• /
• pp.187-196
• /
• 2014

본 논문에서는 고정된 역간 거리를 정해진 운전 시분내에 주행에너지를 최소화하며 주행하는 열차의 특성을 파악하고 수학적으로 모델링한다. 도시철도차량 자동주행에 일반적으로 사용되는 PID제어기 대신 목표값에 추종하면서도 자동 주행 중 소비에너지가 최소화되도록 최적제어기를 사용하여 철도 차량를 모델링하였으며 실제 동일한 운행조건하에서 설계한다. 실제 선로 조건을 적용하여 별도의 차상장치나 선로주변시설 없이도 자동운전 중 주행에너지를 최소하여 주행에너지를 절감하고자 한다. 따라서 8호선 실 노선 구간별 운전시분 내에서 실측 데이터 분석을 위해 직선구간/구배구간/곡선구간 등 구간을 선정하고 그 구간에서 열차의 운행패턴에 따라 에너지를 절감하는 열차운행을 방법을 제시하였다.

• 디지털융복합연구
• /
• 제16권10호
• /
• pp.213-222
• /
• 2018

본 연구는 고령운전자의 교통사고율 감소를 위하여 고령자의 운전패턴 인식을 통해 교통사고위험지수를 도출하고 그에 따라 운전면허증의 갱신 및 반납 정책에 반영하고자 실시되었다. 먼저, 고령운전자의 행동특성을 분석하여 교통사고를 유발하는 주요요인을 도출하여 교통사고 위험지수를 정의한다. 둘째, 자동차에 부착된 카메라, 거리센서와 스마트폰을 통하여 고령자의 운전패턴으로부터 교통사고 위험지수를 측정하는 방법을 제시한다. 마지막으로 컴퓨터 시뮬레이션으로 3개의 문턱 값을 도출하여 측정된 교통사고 위험지수로부터 사고위험도를 4단계로 판별하고 고령 운전자의 안전운전을 보장하기 방안을 제시한다. 제안하는 방법에 따라 고령운전자의 운전능력을 객관적으로 평가하여 운전면허 갱신주기의 재설정 및 자진 반납을 유도함으로써, 고령운전자의 교통사고 증가로 인한 사회적 비용을 최소화하기 위한 운전면허증 관리정책 수립에 적극 활용 가능할 것이라 믿는다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.201-207
• /
• 2010

In this study, the SIP (Soil-cement Injected precast Pile) method among the Low-vibration & Low-noise pile driving methods was decided into study compensation. Ground vibrations by the SIP methods step by step divide and were analyzed. Quantitative response values and ground vibration equations with reliability were presented from findings of this study. Also, vibration responses that are occurred by the SIP method of construction were compared as quantitative with vibration responses by general method of construction that are presented in existent study. Ground vibration values by the SIP method correspond to level of 17 ~ 57% of values that are assumed by the Attewell & Famer's equation, respectively, and these result compares in reliability 50% and separated distance 10 ~ 50 m. Also, those values were analyzed that correspond to level of 14 ~ 96% of ground vibration values by the Prof. Park's equation, respectively. Construction limit extents, separation distances from vibration occurs position, were presented that can satisfy domestic criteria for vibration control for the SIP methods. Those presented in this paper were divided newly according to reliability.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.131-136
• /
• 2013

Automobile was first introduced in 1903 in South Korea, the masses of the car was carried out rapidly compared to other countries. However, many people were killed in a traffic accidents and economic loss was occurred due to the spread of the automobile. In South Korea, 2012, traffic accident occurred 223,656 times, 5,392 fatality, 344,565 injured people. In the last five years, about 224,000 accidents per year were occurring. In other words, 610 traffic accidents occur and about 15 people pass away in one day. In addition, the proportion of traffic accidents is first place in the OECD countries and it is very high in the world. Understand occurrence tendency of traffic accident, accident frequency rate of the driver who drives more than 10 years was higher than the novice driver. In addition, as a result of examining the cause of the traffic accident, breach of safe driving obligation appears highest case (125,391 times), and followed by signal violation, break safety distance. Therefore, the majority of traffic accidents occurred by the lack of safety awareness of the driver. In this study, prevent the loss of human life and property in traffic disaster, by establish disaster prevention measures that investigated by questionnaire survey and statistical data of the state of consciousness and driving posture in response to the driving history of the driver.

• 전기학회논문지
• /
• 제66권8호
• /
• pp.1207-1214
• /
• 2017

In the case of frequent braking, when driving downhill or long distance, conventional brakes using friction are problematic in braking safety due to brake rupture and fading phenomenon. Therefore auxiliary brakes is essential for heavy vehicles. And several research has been actively conducted to improve energy efficiency by regenerating mechanical energy into electric energy when the vehicles brake. In this paper, a voltage control method is utilized to recover the electric energy generated in the electromagnetic retarder instead of the eddy current. To regenerate the braking energy into the electrical energy, a resonant L-C circuit is configured in the retarder. The retarder can be modeled as self-excited induction generator due to its operating principle. The driving conditions according to the retarder's parameters are made into 3-D maps. Also, the voltage of the resonant circuit changing depending on the driving pulse applied to the FET was analyzed. For the control of this voltage, we proposed an algorithm using the PI controller. The controlled voltage is converted by a 3-phase AC/DC converter and then charged to a battery inside the heavy vehicles through a DC/DC converter. Electromagnetic retarder and its controller are validated using Matlab Simulink. We also demonstrate the voltage controller through the actual M-G set experiment.

• 게임&엔터테인먼트 논문지
• /
• 제2권1호
• /
• pp.35-44
• /
• 2006

본 연구의 목적은 가상현실 분야의 그림 속으로의 여행 기법(TIP, Tour Into the Picture)을 적용하여 운전자가 원하는 목적지까지의 경로를 실시간으로 도로 전경과 동일한 실사기반 3차원 영상으로 보여줄 수 있는 차량용 3차원 네비게이션 시스템을 개발하는데 있다. 이를 위해 기존의 TIP기법을 보완하였고 사용자의 위치와 현재의 도로 상황을 동시에 고려한 최적 경로 탐색기술 등을 제시하였다. 실험 결과, 실제 도로에서 일정 간격을 두고 촬영한 파노라마 실사 영상에 TIP 기법을 적용하여 가상환경을 구축하고 이들 사이의 부드러운 전이를 통해 사진과 같은 품질의 3차원 영상을 보여주었다. 개발된 시스템은 2차원 네비게이션 모듈을 가지며 최적 경로 탐색 및 도로 상황 예측 기능을 제공한다.

• 한국전기전자재료학회논문지
• /
• 제18권9호
• /
• pp.840-845
• /
• 2005

A three branches vortical Hall sensor for detecting rotation angle of brushless motor has fabricated. The sensor is constructed three branches of $150{\mu}m$ width and $300{\mu}m$ distance from central electrode to Hall electrode. Each branch has one Hall output and one Hall input. The central electrode acts as common driving input. According to rotation angle change of brushless motor, sensor gives three position signals phase shifted by $120^{\circ}$. The sensitivity of sensor is 200V/A$\cdot$T at magnetic field of 0.1 T and constant driving current of 1mA. It has also showed three sine waves of Hall output voltages with $120^{\circ}$ phase over one motor rotation. The noise can limit sensor's resolution. We have measured sensor's noise characteristics. The detectable minimum magnetic field is $20{\mu}T$ at driving current 1mA, measured frequency 1 kHz and bandwidth$({\Delta}f)$ of 1Hz.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권1호
• /
• pp.51-59
• /
• 1994

The gas jet pumps serve to preduce a vacuum or can be used as gas jet compressors. These are operated on the same principle as a steam jet vacuum pump : in the driving nozzle the pressure energy of the motive medium is converted into the kinetic energy. In the diffuser the driving jet mixes with the suction medium and the kinetic energy is reconverted into the pressure enegy. The application fields of gas jet ejectors are the evacuation of siphoning installations, the elevation of liquids, the production of vacuum filters, the vacuum supporting airlift system, the evacuation of the suction line of centrifugal pumps and the ventilation of the dangerous gases to the atmosphere. The performance of gas jet ejector is influenced strongly to velocity coefficient of motive nozzle, the distance between the motive outlet to the diffuser inlet and the dimensions of diffuser. This study is performed for the computer aided design of gas jet ejectors in future. Through the present experiments, it is known that the velocity coefficient of the motive air nozzle ranges from 0.91 to 0.95 and the maximum efficiency of gas jet ejector is 24.6%.