• 한국자동차공학회논문집
• /
• 제14권2호
• /
• pp.194-201
• /
• 2006

Roof-fairing and deflector system have been used on heavy-duty trucks to minimize aerodynamic drag force not only for driving stability of the truck but also for energy saving by reducing the required driving power of the vehicle. In this study, a numerical simulation was carried out to see aerodynamic effect of the drag reducing device on the model vehicle. Drag and lift force generated on the five different models of the drag reducing system were calculated and compared them each other to see which type of device is efficient on the reduction of driving power of the vehicles quantitatively. An experiment has been done to see airflow characteristics on the model vehicles. Airflow patterns around the model vehicles were visualized by smoke generation method to compare the complexity of airflow around drag reducing device. From the results, the deflector systems(Model 5,6) were revealed as a better device for reduction of aerodynamic drag than the roof-fairing systems(Model 2,3,4) on the heavy-duty truck and it can be expected that over 10% of brake power of an engine can be saved on a tractor-trailer by the aerodynamic drag reducing device at normal speed range($80km/h{\sim}$).

• 한국정보통신학회논문지
• /
• 제16권9호
• /
• pp.1923-1930
• /
• 2012

본 논문은 대한민국의 '자동차 요일제 특별계약'에서 사용 중인 기존 운행정보 시스템에서 사용자(보험 계약자)가 OBD 단말기(개인용 운행정보확인장치) 설치 중 잦은 탈착 과정에서 발생하는 문제점들을 해결하고자, 스마트폰과 WPAN(Wireless Personal Area Network)을 이용하여 무선으로 운행정보를 보내 탈착 과정을 생략할 수 있는 자동차 운행정보 시스템설계에 관한 연구내용을 다룬다.

• 한국정밀공학회지
• /
• 제27권1호
• /
• pp.49-57
• /
• 2010

This paper describes the design, construction, and fundamental testing of a precision rotational device that utilizes piezoelectric elements as a source of driving force and impact drive mechanism as a driving principle. A novel device structure is designed and the numerical simulations about the static displacement, stress distribution, and mode shape of the designed structure are performed. A fabricated rotational device has been rotated successfully by applying saw-shaped voltages to the piezoelectric elements. The one-step rotational angle was $0.44{\times}10^{-3}$ rad at the applied voltages of 80V. The angular velocities of the device were revealed to be increased as the driving frequency and voltage were respectively increased and the preload was decreased. The device has a feature that it can be translated as well as rotated. An experimental result shows that the device was translated by ${\pm}4.56{\mu}m$ maximum when the 120V sinusoidal voltages with a phase difference of $180^{\circ}$ were respectively supplied to two piezoelectric elements.

• 한국컴퓨터정보학회논문지
• /
• 제27권2호
• /
• pp.61-69
• /
• 2022

배달산업이 COVID-19 상황과 함께 요식업을 중심으로 크게 성장함에 따라 배달업 종사자가 크게 증가했다. 그와 함께 개인형 모빌리티(Personal Mobility: PM)를 활용한 새로운 배달 형태가 등장했으며, 이륜차 혹은 PM 관련 사고는 꾸준히 증가하고 있다. 본 연구는 안전 배달 모니터링 환경을 구축하기 위해 PM의 주행 분석 장치의 제작한다. 이를 위해 주행 분석 장치와 장치에서 수집된 데이터를 클라우드 서버를 통해 처리하는 시스템을 구성했으며, 이 시스템을 통해 PM의 운전상황에서 운전 중 발생할 수 있는 특수한 상황(가/감속, 과속방지턱 통과)을 인식하고 기록하고자 한다. 그 결과 장치 내 측정 센서(IMU)에서 수집한 각속도, 가속도, 지자기 값을 통해 운행 여부 및 인도 주행 여부, 경사로 주행 여부를 판단해 낼 수 있었다. 이 기술은 기존의 영상기반 기록장치보다 약 1600배 이상의 주행 정보 저장 효율을 달성할 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.498-508
• /
• 2008

경부고속열차 차상컴퓨터 장치의 하부장치로 운전자에게 차량의 정보와 고장의 현시 그리고 유지보수기능 및 훈련기능을 가지고 있는 장치가 TECA (Terminal Cabin)이다. KTX 차량의 운전은 고속화 운전을 위해 신호운전의 필요가 요구되어지며 차량의 장대화 및 일인운전을 통한 차량의 기본정보 취득 및 고장에 대한 조치에 있어 많은 어려움이 있는 것이 사실이다. 이에 대해 차량에서 발생하는 수많은 정보에 대한 신속하고 정확한 처리와 유지보수를 위해 TECA장치는 그 활용에 있어 반드시 필요한 장치이다. 그러나 본 장치에 대한 하드웨어와 유지보수 그리고 새로운 요구에 따른 장치개발에는 연구사례가 없는 실정이다. 이에 운전자지원단말기 장치의 유지보수능력 개발과 장치에 대한 이해를 돕고 장치개발에 필요한 TECA의 기초기능과 요구사항을 하드웨어 중심으로 연구하였으며 이로 인한 새로운 운전자 단말기 장치 개발에 필요한 사양정립에 활용하도록 활용할 수 있으리라 본다.

• 드라이브 ㆍ 컨트롤
• /
• 제13권4호
• /
• pp.7-13
• /
• 2016

This paper presents the meter-out and meter-in speed control characteristics of a pneumatic cylinder with relief valve type cushion device. The piston displacement and velocity are measured to investigate high speed driving performance with variation of the pressure setting in relief valve, air supply pressure, load mass, the supply and exhaust flow rate from the cylinder. Also, the internal pressures and temperatures driving pressure and cushion chamber are measured. The piston displacements and velocities of meter-out and meter-in control are compared experimentally determined data. A comparison experimental data meter-out and meter-in control show that a relief valve type cushion device is suitable for high speed pneumatic cylinders. The desired response characteristics of piston displacement and velocity are satisfactory adjust the pressure setting of a relief valve with varying system parameters such as air supply pressure, load mass and controlled flow rate.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.702-707
• /
• 2007

A Color Discerning Device(CDD) is the equipment to use in a Rice Processing Complex(RPC). A CDD can sorting discolored grain according to light and shade. The existing a CDD's driving performance is not so good as overseas machine. Besides, transportation process causes a defect in the mechanism from impact or harmonic excitation or etc. This study is represented the problem of CDD through experiment and simulation on a CDD. To analysis the problem of driving condition, devide each part of CDD for performed modal analysis. The problem of driving of driving condition and transportation process solved by carry out modal analysis and static analysis.

• 한국전기전자재료학회논문지
• /
• 제24권8호
• /
• pp.678-681
• /
• 2011

We have investigated the effect of organic thin film on the driving voltage of OLED (organic light emitting diode) by inserting a 5 nm thick 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP) or triphenylphosphineoxide ($Ph_3PO$) between tris-(8-hydroxyquinoline)aluminum ($Alq_3$) electron transport layer and 4,4'-bis(2,2'-diphyenylvinyl)-1,1'-biphenyl (DPVBi) emission layer. The device with 5 nm thick $Ph_3PO$ layer exhibited higher maximum current efficiency and lower driving voltage than the device with BCP layer, resulting from better electron injection from $Alq_3$ to DPVBi in the device with $Ph_3PO$ layer.

• 대한인간공학회지
• /
• 제31권2호
• /
• pp.319-325
• /
• 2012

Objective: The aim of this study was to develop the assistive device for accelerator and brake pedals using bio-signals from the prefrontal lobe in the driving simulator and evaluate its performance. Background: There is lack of assistive devices for the driving in peoples with disabilities in Korea. However, if bio-signals and/or brain waves are used at driving a car, the people with serious physical limitations can improve their community mobility. Method: 15 subjects with driver's license participated in this study for experiment of driving performance evaluation in the simulator. Each subject drove the simulator the same course 10 times in three separated groups which use different interface controllers to accelerate and brake: (1) conventional pedal group, (2) joystick group and (3) bio-signal group(horizontal quick glance of the eyes and clench teeth). All experiments were recorded and the driving performances were evaluated by three inspectors. Results: Average score of bio-signal group for the driving in the simulator was increased 3% compared with the pedal group and was increased 9% compared with the joystick group(p<0.01). The subjects using bio-signals was decreased 44% in number of deduction compared with others because the device had the built-in modified cruise control. Conclusion: The assistive device for accelerator and brake pedals using bio-signals showed significantly better performance than using general pedal and a joystick interface(p<0.01). Application: This study can be used to design adaptive vehicle for driving in people with disabilities.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권5호
• /
• pp.207-210
• /
• 2001

In this paper, the Flexible information display was implemented uing AC powder electroluminescent device. ZnS:Cu and $BaTiO_3$ were used as a phosphor and dielectric respectively. The growth of phosphor and dielectric layer was performed with screen printing. The flexible information display in this paper was categorized as following; EL display, driving circuit, software for driving. EL spectrum and brightness was measured as the device properties.