• Journal of the Korea Society of Computer and Information
• /
• v.20 no.12
• /
• pp.37-44
• /
• 2015

In this paper, we propose the assistance method to enable safe driving through analysis of dangerous driving behavior using real-time alarm by vehicle speed, azimuth data and smartphone. For this method, smartphone is receiving driving data from digital tachograph using communication. Safe driving habit is a very important issue to commercial vehicle because that driver's long time driving than other vehicle type driver. Existing methods are very inefficient to improve immediately dangerous driving habits during driving because proceed driving behavior analysis after the vehicle operation. We propose the new safe driving assistance method that can prevent traffic accidents by real-time and improve the driver's wrong driving habits through real-time dangerous driving behavior analysis and notification the result to the driver. We have confirmed that the method in this paper will help to improve driving habits and can be applied through the proposed method implementation and simulation experiment.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.2
• /
• pp.55-62
• /
• 2015

In this paper, we proposed the method that enabling warning through real-time analysis of dangerous driving behavior, improving driving habits and safe driving using the digital tachograph. Most of traffic accidents and green drive are closely related of driving habits. These wrong driving habits need to be improved by the real-time analysis, warning and automated method of driving habits. We confirmed the proposed that the method will help support eco-driving, safe driving through real-time analysis of driving behavior and warning through the method implementation and experiment.

• International Journal of Automotive Technology
• /
• v.4 no.2
• /
• pp.101-108
• /
• 2003

There are a lot of factors that influence automotive fuel economy such as average trip time per kilometer, average trip speed, the number of times of vehicle stationary, and so forth. These factors depend on road conditions and traffic environment. In this study, various driving data were measured and recorded during road tests in Seoul. The accumulated road test mileage is around 1,300 kilometers. The objective of the study is to identify the driving patterns of the Seoul metropolitan area and to analyze the fuel economy based on these driving patterns. The driving data which was acquired through road tests was analysed statistically in order to obtain the driving characteristics via modal analysis, speed analysis, and speed-acceleration analysis. Moreover, the driving data was analyzed by multivariate statistical techniques including correlation analysis, principal component analysis, and multiple linear regression analysis in order to obtain the relationships between influencing factors on fuel economy. The analyzed results show that the average speed is around 29.2 km/h, and the average fuel economy is 10.23 km/L. The vehicle speed of the Seoul metropolitan area is slower, and the stop-and-go operation is more frequent than FTP-75 test mode which is used for emission and fuel economy tests. The average trip time per kilometer is one of the most important factors in fuel consumption, and the increase of the average speed is desirable for reducing emissions and fuel consumption.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.1
• /
• pp.38-44
• /
• 2018

This paper presents an analysis on driving safety in lane change situation based on road driving data. Autonomous driving is a global trend in vehicle industry. LKAS technologies are already applied in commercial vehicle and researches about lane change maneuver have been actively studied. In autonomous vehicle, not only safety control issue but also imitating human driving maneuver is important. Driving data analysis in lane change situation has been usually dealt with ego vehicle information such as longitudinal acceleration, yaw rate, and steering angle. For this reason, developing safety index according to surrounding vehicle information based on human driving data is needed. In this research, driving data is collected from perception module using LIDAR, radar and RT-GPS sensors. By analyzing human driving pattern in lane change maneuver, safety index that considers both ego vehicle and surrounding vehicle state by using relative velocity and longitudinal clearance has been designed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.11a
• /
• pp.27-52
• /
• 2002

Pile driving formula, wave equation analysis of pile driving(WEAP) and dynamic pile loading test have been known to useful tools to appraise the behaviour of pile driving. This paper reviews basic theories of three methods and gives some suggestions to apply them to practice. And also some cases on application of the methods to the sites are discussed in this paper. It appears that it is inevitable for engineers to be experienced well so that the methods can be regarded as useful tools.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.267-272
• /
• 2014

In this paper, we analyze the characteristics for the driving shock resistance of the military vehicle through the bump test. Prior to the experiment, theoretical analysis was performed by using the SRS(shock response spectrum) and VRS(vibration response spectrum) analysis method. And we estimated the characteristics for the driving shock resistance of the military vehicle. Bump test was performed using the acceleration sensor and the driving test at a different speed. We evaluated the characteristics for the driving shock resistance of the military vehicle based on the result. And predicted values were compared with the theoretical analysis. In addition, we evaluated the results of the theoretical prediction of the SRS and the VRS analysis. And we evaluate the suitability of the prediction method at military vehicle shock analysis.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.5
• /
• pp.499-510
• /
• 2015

The purpose of this research is to identify new service opportunities for enhancing driving safety of intra-city buses based on driving behavior analysis. Service opportunity identification involves finding target customers of service (to whom), motivations for service (why), service contents (what), and service delivery process (when, where). This paper presents an analysis of driving behaviors using the operational data of intra-city buses in conjunction with traffic accident data and drivers' driving history data. This paper also presents four identified service opportunities based on the data analysis results. This research would contribute to enhancing driving safety of intra-city buses in Korea and serve as a basis for developing new services for driving safety enhancement.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.5
• /
• pp.13-22
• /
• 2015

These days, human behavior (human factor), the main cause of traffic accidents, has drawn more attention. Research on driving behavior based on DBQ(Driver Behavior Questionnaire), the analysis tool of driving behavior, has been conducted actively. In domestic previous studies, their analysis subjects were limited to researchers or military officials, and their analysis methods were based on factor analysis and regression analysis. Therefore, this study tries to find the factors of general drivers' driving behavior that influence risk driving, and to analyze their influential relationship. Regarding study scope, general drivers with driving career were asked to answer DBQ questionnaire, and 300 effective samples were analyzed. In addition, previous studies were investigated to draw the three measurable attributes of DBQ-'Lapse, Mistake, and Violation'-as main factors of traffic accidents, and structural equation model was applied to design risk driving behavior model. To identify the difference between risk driving groups, this study made use of multiple group analysis. The analysis came to the following results: First, according to the examination of the hypothesis that 'Lapse, Mistake, and Violation factors will influence risk driving behavior', all factors were found to be statistically significant. Regarding their level of influence on risk driving behavior, Violation was 0.464, Lapse 0.383, and Mistake 0.158, and thus Violation was analyzed to be the most influential. Secondly, according to the examination of the hypothesis that 'the influence of Lapse, Mistake, and Violation factors on risk driving behavior will be different by risk group', the influence of Lapse on risk driving behavior was found to be different by risk group. It is expected that the study results will be used as a fundamental program to introduce traffic accident prevention program and education that takes violation and lapse into consideration.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.178-183
• /
• 2010

Base-mounted type(BMT) driving assembly in CNC machine tools is an indispensable part to improve productivity by reducing tool changeover time and to meet the ever-increasing demand of precision machine tools. This study aimed to perform finite element analysis and geometric parameter optimization to improve the efficiency of BMT driving assembly. First, simulations for three-dimensional structural and vibration analysis were performed using ANSYS/Workbench on the initial geometric models of BMT driving assembly. After analyzing stress and deformation concentration zones, several new geometrical models were designed and evaluated by design of experiments and ANSYS/DesignXplorer. Through a series of analysis-evaluation-modification cycles, it was seen that designed models were effective in determining optimal geometry of BMT driving assembly.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.6
• /
• pp.871-883
• /
• 1997

Kinetodynamics of a cam driving slider mechanism consists of kinematic analysis and force analysis. The kinematic analysis is to determine the kinematic characteristics of a cam driving mechanism and a slider mechanism. The force analysis is to determine the joint forces of links, the contact forces of the cam and follower, and the driving torque of a main shaft. This paper proposes a close loop method and a tangent substitution method to formulate the relationships of kinematic chains and to calculate the displacement, velocity and acceleration of the cam driving slider mechanism. Also, and instant velocity center method is proposed to determine the cam shape from the geometric relationships of the cam and the roller follower. For dynamic analysis, the contact force and the driving torque of the cam driving slider mechanism are calculated from the required sliding forces, sliding motion and weight of the slider.