Park, Su-min;Hong, Man-pyo;Shon, Tae-shik;Kwak, Jin
Journal of Internet Computing and Services
/
v.17
no.6
/
pp.81-91
/
2016
VANET is one of the most developed technologies many people have considered a technology for the next generation. It basically utilizes the wireless technology and it can be used for measuring the speed of the vehicle, the location and even traffic control. With sharing those information, VANET can offer Cooperative ITS which can make a solution for a variety of traffic issues. In this way, safety for drivers, efficiency and mobility can be increased with VANET but data between vehicles or between vehicle and infrastructure are included with private information. Therefore alternatives are necessary to secure privacy. If there is no alternative for privacy, it can not only cause some problems about identification information but also it allows attackers to get location tracking and makes a target. Besides, people's lives or property can be dangerous because of sending wrong information or forgery. In addition to this, it is possible to be information stealing by attacker's impersonation or private information exposure through eavesdropping in communication environment. Therefore, in this paper we propose Privacy Assurance Architecture for VANET to ensure privacy from these threats.
Kim, Jun-Su;Ryu, Min-Woo;Cha, Si-Ho;Lee, Jong-Eon;Cho, Kuk-Hyun
Journal of the Korea Academia-Industrial cooperation Society
/
v.13
no.8
/
pp.3672-3679
/
2012
Vehicle Ad hoc Network (VANET) is next-generation network technology to provide various services using V2V (Vehicle-to-Vehicle) and V2I (Vehicle-to-Infrastructure). In VANET, many researchers proposed various studies for the safety of drivers. In particular, using the emergency message to increase the efficiency of traffic safety have been actively studied. In order to efficiently transmit to moving vehicle, to send a quick message to as many nodes is very important via broadcasting belong to communication range of vehicle nodes. However, existing studies have suggested a message for transmission to the communication node through indiscriminate broadcasting and broadcast storm problems, thereby decreasing the overall performance has caused the problem. In addition, theses problems has decreasing performance of overall network in various form of road and high density of vehicle node as urban area. Therefore, this paper proposed Clustering based Routing Algorithm (CBRA) to efficiently transmit emergency message in high density of vehicle as urban area. The CBRA managed moving vehicle via clustering when vehicle transmit emergency messages. In addition, we resolve linkage problem between vehicles according to various form of road. The CBRA resolve link brokage problem according to various form of road as urban using clustering. In addition, we resolve broadcasting storm problem and improving efficacy using selection flooding method. simulation results using ns-2 revealed that the proposed CBRA performs much better than the existing routing protocols.
Many researchers have studied flash memory in order to replace hard disk storages. Many FTL algorithms have been proposed to overcome physical constraints of flash memory such as erase-before-write, wear leveling, and poor write performance. Therefore, these constraints should be considered for testing FTL algorithms and the performance evaluation of flash memory. As doing the experiments, we suffer from several problems with costs and settings in experimental configuration. When we, for example, replay the traces of Oracle to evaluate the I/O performance with flash memory, it is hard to extract exact traces of I/O operations in Oracle. Since there are only write operations in the log, it is impossible to gather read operations. In MySQL and SQLite, we can gather the read operations by changing I/O functions in the source codes. But it is not easy to search for the exact points about I/O and even if we can find out the points, we might get wrong results depending on how we modify source codes to get I/O traces. The FlaSim proposed in this paper removes the difficulties when we evaluate the performance of FTL algorithms and flash memory. Our Linux drivers emulate the flash memory as a hard disk. And we can easily obtain the usage statistics of flash memory such as the number of write, read, and erase operations. The FlaSim can be gracefully extended to support the additional modules implemented by novel algorithms and ideas. In this paper, we describe the structure of FTL emulator, development tools and operating methods. We expect this emulator to be helpful for many experiments and research with flash memory.
Kim, Joonghun;Oh, Hyoungseok;Baik, Minseok;Hwang, Jaehoon
Journal of the Korea Academia-Industrial cooperation Society
/
v.17
no.9
/
pp.431-439
/
2016
Urban regeneration projects involve various stakeholders, which result in decision making processes that require long periods of time and cause many conflicts. This study aims to identify important factors in decision making for promoting an urban regeneration project. The analysis results utilizing AHP are as follows: Firstly, the analysis results identify the main considerations in the process of promoting urban regeneration projects as residents' opinion(0.393), involvement of local government(0.231), opinions of related experts(0.206) and master plan(0.169). Secondly, the key drivers of stakeholders' qualitative decision making were found to include sustainability(0.325), economic feasibility(0.277), ease of project implementation(0.232) and equity(0.166). Lastly, meaningful differences in the relative importance of key aspects of decision making were identified when respondents were grouped according to being aware or not aware of the urban regeneration project, as well as living on or living off the project site. The results of this study can be used to implement successful urban regeneration projects in the future.
Recently, the convergence of information technology with bio-technology, nano-technology or other technologies has been creating a new paradigm. In a field of transportation, the intelligent transport systems which is a convergence of intelligent technologies and transportation systems have been studied. The Variable Speed Limit(VSL), is one of ITS technologies, is thought to improve safety and efficiency of transportation while controlling speed limit based on road conditions. Legacy studies have considered only one station for VSL algorithm. However, it is not appropriate for an urban freeway installed with many stations. In this paper, new algorithm is proposed to not only enhance effectiveness of VSL based on cooperation of stations but also reflect road conditions within 30 seconds. The proposed algorithm consists of 4 steps: the first is a "searching bottleneck station" step, the second is a "calculating a size of congestion" step, the third is a "calculating the number of controlled stations" step, the final is a "calculating VSL" step. This algorithm guarantees improved safety and minimum additional travel time. The travel time should be considered because drivers would against the VSL algorithm when the proposed algorithm occurs additional travel time. In our experiments, microscopic traffic simulator VISSIM is selected to perform a modeling work. The results show that proposed algorithm provides the improved safety and minimum increase of travel time.
KIPS Transactions on Computer and Communication Systems
/
v.6
no.8
/
pp.343-352
/
2017
IEC62541, known as OPC-UA, is a standard communication protocol for Smart Grid (SG) and Smart Factory application platform. It was accepted as an IEC standard (IEC62541) in 2011 by IEC TC57, and is extending range of application as collaborating with other standrads. The government's policies to popularize EVs ("Workplace Charging Challenge"), the number of Electric vehicle which try to be charging in the factory is expected to increase. In this situation, indiscreet and uncontrolled EV charging can lead to some problems, such as excess of the peak demand capacity. Therefore, EVs, which is charging in SFs, must be monitoring and controlling to avoid and reduce peak demand. However, the standards for EVs charging differ from the standards for SFs. In other words, to increase the ease of use for drivers, and reduce risk for enterprise, we have needs of study to develop the protocols or to provide interoperability, for EVs charging in SFs. This paper deals with a EV charging management platform installing in a smart factory. And this platform can be easily integrated as part of SF management software. The main goal of this paper is to implement EV management system based on IEC61851 and IEC62541.
The Journal of The Korea Institute of Intelligent Transport Systems
/
v.11
no.6
/
pp.1-14
/
2012
Traffic management centers (TMC) collect real-time traffic data from the field and have powerful databases for analysing, recording, and archiving the data. Recent advanced sensor and communication technologies have been widely applied to intelligent transportation systems (ITS). Regarding sensors, various in-vehicle sensors, in addition to global positioning system (GPS) receiver, are capable of providing high resolution data representing vehicle maneuverings. Regarding communication technologies, advanced wireless communication technologies including vehicle-to-vehicle (V2V) and vehicle-to-vehicle infrastructure (V2I), which are generally referred to as V2X, have been widely used for traffic information and operations (references). The V2X environment considers the transportation system as a network in which each element, such as the vehicles, infrastructure, and drivers, communicates and reacts systematically to acquire information without any time and/or place restrictions. This study is motivated by needs of exploiting aforementioned cutting-edge technologies for developing smarter transportation services. The proposed system has been implemented in the field and discussed in this study. The proposed system is expected to be used effectively to support the development of various traffic information control strategies for the purpose of enhancing traffic safety on highways.
The Journal of The Korea Institute of Intelligent Transport Systems
/
v.11
no.6
/
pp.155-163
/
2012
At present the letter sizes of traffic sign are variously designated as 22 cm through 60 cm, however the basis for determination has not been found so far. Driver's visual acuity for getting a driver licence is required higher than 0.5. In order to interpret the information of traffic signs effectively, the minimum requirement of driver's visual acuity must be applied to determine the letter size of traffic sign. Therefore we reviewed that a driver with visual acuity of 0.5 could read the current letter sizes of traffic sign. In addition, a methodology was developed to determine the letter size of traffic sign satisfied with the driver's visual acuity of 0.5. This study established scenarios that were composed of visual acuity, reaction time, the number of lane and the letter sizes of traffic sign for each scenario were proposed. Current letter size of traffic sign would not be difficult for drivers with minimum visual acuity of 0.5 to recognize the contents or information of traffic signs. The method developed in this research has an advantage that can consider a human factor like driver's visual acuity for the design of traffic signs. There is also a meaning of making a basis for the letter size of traffic sign.
Kim, Myung Soo;Kim, Hyoungtak;Kang, Dong-uk;Yoo, Hyun Jun;Cho, Minsik;Lee, Dae Hee;Bae, Jun Hyung;Kim, Jongyul;Kim, Hyunduk;Cho, Gyuseong
Journal of Radiation Industry
/
v.6
no.1
/
pp.31-40
/
2012
There are two methods to fabricate the readout electronic to a large-area CMOS image sensor (LACIS). One is to design and manufacture the sensor part and signal processing electronics in a single chip and the other is to integrate both parts with bump bonding or wire bonding after manufacturing both parts separately. The latter method has an advantage of the high yield because the optimized and specialized fabrication process can be chosen in designing and manufacturing each part. In this paper, LACIS chip, that is optimized design for the latter method of fabrication, is presented. The LACIS chip consists of a 3-TR pixel photodiode array, row driver (or called as a gate driver) circuit, and bonding pads to the external readout ICs. Among 4 types of the photodiode structure available in a standard CMOS process, $N_{photo}/P_{epi}$ type photodiode showed the highest quantum efficiency in the simulation study, though it requires one additional mask to control the doping concentration of $N_{photo}$ layer. The optimized channel widths and lengths of 3 pixel transistors are also determined by simulation. The select transistor is not significantly affected by channel length and width. But source follower transistor is strongly influenced by length and width. In row driver, to reduce signal time delay by high capacitance at output node, three stage inverter drivers are used. And channel width of the inverter driver increases gradually in each step. The sensor has very long metal wire that is about 170 mm. The repeater consisted of inverters is applied proper amount of pixel rows. It can help to reduce the long metal-line delay.
KSCE Journal of Civil and Environmental Engineering Research
/
v.39
no.5
/
pp.595-603
/
2019
To alleviate the demand on private car that is constantly increasing, Busan Metropolitan City (BMC) has established Bus Rapid Transit (BRT) to revitalize public transportation. But there are no unified lane system between BRT and general bus stations, which makes off-lane turning general bus to contribute to congestion. And as the bottleneck phenomenon at entrance/exit accelerates the congestion, there has been huge dissatisfaction among commuting drivers. Therefore, this study identifies efficient methods to operate better through measuring civilian awareness. We evaluate both satisfaction and drawbacks on BRT service with Importance-Performance Analysis (IPA). We first distinguish the groups by the awareness on BRT and their main transit usage, and then clarify the difference between the groups. And as a result, the group who is positive to BRT and uses buses often demands improvement in bus indoor comfort and curbing jaywalking. On the other hand, group who is negative to BRT and uses private cars often demands improvement in lane changing and the moving speed of private cars. We next examines the groups with MDPREF, one method of Multidimensional Scaling (MDS). And we have clarified that the evaluating criteria and the individual attributes of the groups corresponds very well.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.