• Proceedings of the ESK Conference
• /
• 1987.04a
• /
• pp.143-148
• /
• 1987

The Design of automotive IP must be designed for improving safety, and for satisfying the consumer's preference and for enlarging the usability of various gauges and information displaydevices. Also, these objects become more important by regarded and will be treated very sensitively for the next-generation vehicle concepts. Therefore, Automotive IP must be designed to adjust these trends, besides accord with car-inner lifestyle. One of these concept's designs is to apply Human Sensibility Ergonomics. This study suggestes the driver-centered design of the IP components that focused on the audio unit and HVAC(Heat and Ventilation Air Conditioner) through cognitive experiment. Primarily, analyzed components of IP in use, then, combined these components (especially, the number and arry of buttons, the position of LCD panel, etc.) nd designed some sample images(prototypes) the same as real size. After the subjects looked at the sam ples at the interval of 0.2/0.4/0.6 seconds, subjects should fill out the given forms from their memory. Then, the optimal prototype of IP was designed in respect to the correctness of cognition. The results will show the basic guideline of optimal design of IP that in the case of aaudio unit, the position of LCD, the array and the number of channel, in the case of HVAC, the position of LCD, TEMP button type and other button types.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.1
• /
• pp.74-82
• /
• 2002

In this paper the start fuel index was developed to estimate ride quality of a forklift truck during the start motion. Through the consultation with test drivers, definition of start feel was made, and three parameters were selected to describe the start motion. They are engagement shock in the forwarding direction, vertical and pitch vibration respectively. To find out the relation between the measured motion and the subjective fueling, both the subjective rating and the measurement of vehicle motions were performed simultaneously. The correlation analysis between the two kinds of results showed start fuel was expressed by the measured accelerations with accuracy and reliability, Use of the new index has advantages of not only evaluating start fuel only by the measured signals but providing the consistent results which are not affected by physical and mental state of a test driver. Usefulness of the new index was confirmed by verification test on four new forklift trucks of a same model, which showed the order of preference by the index was coincided that by subjective evaluation.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.3
• /
• pp.247-264
• /
• 2015

Objective: The purpose of this study is to determine the priority of information presentation and the effective menu type to be placed in the center of a gauge cluster display for commercial trucks and to present a set of ergonomic designs for the gauge cluster display. Background: An effective ergonomic design is specifically needed for the development of the gauge cluster display for the commercial trucks, because more diverse and heavier information is delivered to truck drivers, compared to the information to passenger car drivers. Method: First, all the information that must be shown on the commercial truck display was collected. Then, the severity, frequency of use, and display design parameters were evaluated for those information by commercial truck drivers. Next, an analysis on the information attributes and the heuristic evaluation utilizing the display design principles were carried out. According to the results, a design alternative of the main screen to be displayed was constructed by priority. A comparative analysis between the alternative and existing main screens was also conducted to see the efficacy of the designs. Lastly, we conducted an experiment for the selection of menu type. The experiment was conducted using the driving simulator with an eye-tracking device. The independent variables were four types of the menu reflecting the commercial truck characteristics such as grid type, icon type, list type, and flow type. We measured preference, total execution time, the total duration of fixation on the gauge cluster area, and the total number of fixation on the gauge cluster area as dependent variables. Results: Four types of driver convenience information and six types of driver assistance information were selected as the information to be placed primarily on the main screen of the gauge cluster. The Grid type was the most effective among the menu types. Conclusion: In this study, the information that appears on the main screen of the display, the division of the display and the design of the menu type for commercial truck drivers were suggested. Application: This study is expected to be utilized as guidelines on the ergonomic design of a gauge cluster display for commercial trucks.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.89-97
• /
• 2007

The car-dependent traffic system based on highly advanced industrialization and economic growth causes various urban problems including traffic jams, energy consumption, air pollution, noise, car accidents and other issues. Particularly in urban areas, air pollution from motor vehicles is worse than pollution from past industrialization. In this study, therefore, the authors grasped car exhaust reduction effects by using microsimulation and those traffic policies that could make cars flow smoothly, reducing the air pollution in urban areas through analysis on profitability. As a result, the weekday-based car using system has been found most effective as it does not need investment cost. However, this system may be socially unacceptable, as it requires the government to change driver behavior. Therefore, the government needs to first reach a consensus with the citizens regarding this system. This system will also be effective with other alternatives. As a follow-up study, the authors will research citizens' perceived impacts of car exhaust on air pollution through a study on preference and grasp the possibility of applying these study results to real traffic policies.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.5
• /
• pp.83-94
• /
• 2016

Providing a voice alarm to drivers approaching a work zone could be an effective alternative to mitigate the potential safety problems of the work zone. This study conceived a voice alarm with a direction sound speaker and a field test was conducted that evaluated the feasibility of the voice alarm at a highway work zone. During the field study, we carried out on-site driver surveys to obtain drivers' perception and preference, collected approaching speeds, and measured sound level during the off-peak 2-hour for two days, respectively. The results showed that while the voice alarm has the potential to be an effective tool in improving safety, the alternative appeared to have the negative effect of noise. Further refinement to a voice alarm with a directional speaker is required to improve feasibility, and the results are expected to be utilized as basic data useful for the refinement.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.2
• /
• pp.190-198
• /
• 2012

This research evaluated and analyzed the level of acceptability of spinach according to blanching time by testing consumer taste of corresponding countries for the purpose of globalizing Korean food. General taste, appearance, flavor, and texture of spinach blanched for 20 seconds were highly evaluated by Koreans and Japanese ($p$<0.05), who are used to the method of slightly blanching, mixing, and eating spinach. On the other hand, general taste, appearance, flavor, and texture of spinach blanched for 5 minutes was highly evaluated by the French ($p$<0.05), who are used to eating boiled spinach. Concerning the result of JAR, there were clear differences in hardness and boiling level according to country among spinach samples, even though they were blanched for the same time and mixed with the same spices. Koreans and Japanese evaluated that hardness and boiling level of spinach blanched for 20 seconds were proper, whereas the French evaluated that spinach scalded for 20 seconds was too raw and crispy. Under the same context, French consumers evaluated that hardness and boiling level of spinach blanched for 5 minutes was proper, whereas Koreans and Japanese evaluated that spinach blanched for 5 minutes was boiled too much. These results show that familiarity level is an important driver of affecting the preference levels for three kinds of spinach according to country.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.5
• /
• pp.616-621
• /
• 2006

Recently many cars are equipping a navigation system. The main purpose of the early system guides a user through the route. A navigation system includes various abilities by development of various technologies and it has given more convenience to user. It can play various records on the tape and announces which are useful information about each road. Also it can use various multi-media contents by DMB device during driving. However, guide function of basic and important road in the navigation system has not grown greatly yet. In this paper, we proposed recommendation method of human-friendly road considering user's condition through various information of outside environment, user's velocity intention, a driver's emotion and a preference of the road. Modules consists of hierarchical structure that can easily correct and add each algorithm and those use fuzzy logic algorithm.

• The Korean Journal of Emergency Medical Services
• /
• v.15 no.1
• /
• pp.65-78
• /
• 2011

Purpose : We investigated the career choice and the employment preparation of emergency medical technology (EMT) students. The results of study will provide the base information about the consciousness for career choice and employment of the EMT students. Method : We conducted 1,586 surveys from 665 students at six four-year colleges and 921 students at seven three-year colleges, from Aug. 27th to Oct. 31st in 2010. The result was analyzed by SPSS 18.0 using description statistics, t-test, ANOVA, Scheffe and Pearson correlation coefficient. Result : The general characteristics showed male 50.2% and female 49.8%, and first grade 34.6%, second grade 27.4%, third grade 28.2%, and fourth grade 9.8%. The 53.9% of students had experienced the hospital training and the 44.8% did the fire station training. For the choice of job, there were the 61.8% student who hope to enter the employ in fire station or public service, while 25.7% students hope to be employed in hospitals. The reason for a wish job were 'majors-related job' in 18.2% students, 'employment stability' in 17.2% and 'hit on the aptitude and talent' in 16.7%, 'appropriate salaries' in 15.9%. In the questionnaire of the University what to assist you for job preparation, they chose the 'support for get major related license', 'support for officer exam preparation' and 'support of foreign language study' in 34.6%, 16.8% and 16.6%, respectively. For achieved licence, they had a driver's license in 53.9%, BLS (basic life support) provider in 20.3%, life guard in 16.2% and scuba in 8.8%. The statistically significant correlation was identified between the awareness of University that provides job information and one's career awareness (r= .203, p<.000), the awareness that University provide job information and one's confidence in employment (r= .236, p<.000), and one's career awareness and one's confidence in employment (r = .356, p = .000). Conclusion : The most of EMT Students are well conscious of the their future employment and has prepared career to be employed their preference job.