• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.76-82
• /
• 2005

In this paper, validation of Driver Steering Model has been conducted. The comparison between the simulation model and vehicle test results shows that the model is very feasible for describing combined human driver and actual vehicle dynamic behaviors. The 3D vehicle model is consisted of 6-DOF sprung mass and 4-quarter car model for vehicle body dynamics. Powertrain model including differential gear and Pacejka tire model are applied. The driver steering model is also validated with vehicle test result. The driver steering model is based on angle and displacement error from the desired path, recognized by driver.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.855-860
• /
• 2007

This paper describes a human driver model developed based on finite preview optimal control method. The human driver steering model is constructed to minimize a performance index which is a quadratic form of lateral position error, yaw angle error and steering input. Simulation studies are conducted using a vehicle simulation software, Carsim. The Carsim vehicle model is validated using vehicle test data. In order to validate the human driving steering model, the human driver steering model is compared to the driving data on a virtual test track(VTT) and the actual vehicle test data. It is shown that human driver steering behaviors can be well represented by the human driver steering model presented in this paper

• 자동차안전학회지
• /
• 제9권3호
• /
• pp.19-23
• /
• 2017

This paper presents a lateral driver model with neuromuscular system to evaluate the performance of electric power steering (EPS). Output of most previously developed driver models is steering angle. However, in order to evaluate EPS system, driver model which results in steering torque output is needed. The proposed lateral driver model mainly consists of 2 parts: desired steering angle calculation and conversion of steering angle into steering torque. Desired steering angle calculation part results in steering angle to track desired yaw rate for path tracking. Conversion of steering angle into torque is consideration with neuromuscular system. The proposed driver model is investigated via actual driving data. Compared to other algorithms, the proposed algorithm shows similar pattern of steering angle with human driver. The proposed driver can be utilized to efficiently evaluate EPS system in simulation level.

• 한국자동차공학회논문집
• /
• 제3권3호
• /
• pp.119-128
• /
• 1995

A driver-vehicle model means the integrated dynamic model that is able to estimate the steering wheel angle from the driver's desired path based on the dynamic characteristics of the driver and vehicle. In this paper, the dynamic characteristics of several four-wheel steering systems with the simultaneously steerable front and rear wheels are investigated and compared by means of the driver-vehicle model. Especially, the presented analysis results are obtained by using the ISO test codes such as lane change, double lane change and slalom, and the effects of the driver's steering response time and vehicle speed are examined on the responsiveness and stability of vehicle.

• Journal of information and communication convergence engineering
• /
• 제11권2호
• /
• pp.95-102
• /
• 2013

This paper presents a stochastic driver behavior modeling framework which takes into account both individual and general driving characteristics as one aggregate model. Patterns of individual driving styles are modeled using a Dirichlet process mixture model, as a non-parametric Bayesian approach which automatically selects the optimal number of model components to fit sparse observations of each particular driver's behavior. In addition, general or background driving patterns are also captured with a Gaussian mixture model using a reasonably large amount of development data from several drivers. By combining both probability distributions, the aggregate driver-dependent model can better emphasize driving characteristics of each particular driver, while also backing off to exploit general driving behavior in cases of unseen/unmatched parameter spaces from individual training observations. The proposed driver behavior model was employed to anticipate pedal operation behavior during car-following maneuvers involving several drivers on the road. The experimental results showed advantages of the combined model over the model adaptation approach.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1995년도 추계학술대회 학술발표 논문집
• /
• pp.159-164
• /
• 1995

Driving maneuver in car following are affected by not only the factors related to road structure and traffic condition, but also the factors related to driver's cognition to them. So the aim of this research this to model the relation of driver's cognition for car-following distance considering driver's fuzziness for imformation cognition, As a result, driver's cognition of car-following distance model with fuzzy number is proposed. The 'width', which characterizes the fuzzy number can introduce car-following informtion into the model.

• 대한교통학회지
• /
• 제12권1호
• /
• pp.5-24
• /
• 1994

The purpose of this study is to develop an accident hazard index model in order to be used for the evaluation of regional traffic safety and to develop a driver violation index model in order to identify the primary causes of traffic accidents. The accident hazard index model was developed considering the accident rates based on population and the vehicle registration. The driver violation index model was developed considering the accident rates of each item of driver violation. Using the models developed in this study, it is identified that in the provincial level analysis the degree of the traffic safety of Chungbuk, Chungnam, and Kyungbuk Province are evaluated to be low. In the county level analysis of Kyungnam Province, the degree of the traffic safety of Yangsan, Euirung, Haman, Sachun and Tongyung County are evaluated to be low. Also, it is found that the major driver violations causing accidents in the nation are driving by unlicensed drives, improper passing, and improper railroad crossing : in Kyungnam Province, improper passing is the most driver violation.

• 산업공학
• /
• 제25권2호
• /
• pp.187-195
• /
• 2012

The driver model based on the ACT-R cognitive architecture was developed in order to predict the performance and cognitive workload of a driver operating HVI devices. In the 10 HVI tasks, the predicted performance time and cognitive workload by the ACT-R driver model was well matched and highly correlated with the mean of performance times and subjective workload ratings from 15 participants, respectively. It is strongly proposed that the ACT-R driver model in this study can be applied to evaluate the usability of a new HVI design with less cost in the early stage of system development.

• International Journal of Computer Science & Network Security
• /
• 제24권3호
• /
• pp.142-150
• /
• 2024

A conceptual model represents an understanding of a system that is going to be developed, which in this research, a driving simulation software to study driver behavior at signalised intersections. Therefore, video observation was conducted to study driver compliance behaviour within the dilemma zone at signalised intersection, with regards to driver's distance from the stop line during yellow light interval. The video was analysed using Thematic Analysis and the data extracted from it was analysed using Chi-Square Independent Test. The Thematic Analysis revealed two major themes which were traffic situation and driver compliance behaviour. Traffic situation is defined as traffic surrounding the driver, such as no car in front and behind, car in front, and car behind. Meanwhile, the Chi-Square Test result indicates that within the dilemma zone, there was a significant relationship between driver compliance behaviour and driver's distance from the stop line during yellow light interval. The closer the drivers were to the stop line, the more likely they were going to comply. In contrast, drivers showed higher non-compliant behavior when further away from stop line. This finding could help in the development of conceptual model of driving simulation with purpose in studying driver behavior.

• 한국정보처리학회논문지
• /
• 제2권6호
• /
• pp.815-822
• /
• 1995

기존의 유닉스 시스템에서는 모든 장치의 구동기가 커널 내부에 구현되어 있다. 따라서, 새로운 장치를 지원하기 위한 구동기를 추가하거나 기존의 구동기를 변경할 경우 커널 내부의 수정 작업이 불가피하다. 일반적으로 유닉스 시스템에서는 커널내 부의 수정 작업이 매우 어렵다. 본 논문에서는 이러한 어려움을 극복하기 위한 방법 으로써 사용자 수준의 단말기 구동기 모델을 제시한다. 제시한 모델의 기본 개념은 단말기 구동기를 사용자 수준의 서버로 구현함으로써 새로운 단말기 구동기의 동적 재구성을 제공하는 것이다. 제시한 모델의 타당성을 검증하기 위해 사용자 수준의 단말기 구동기를 SunOS 와 Linux 환경에서 구현하고, 그 성능을 평가하였다.