• 한국의류학회지
• /
• 제26권11호
• /
• pp.1514-1526
• /
• 2002

The objective of this study is to ascertain the major considerations when designing slacks for automobile drivers reflecting the elasticity of the human body posture. The scope of this study aims to find out the causes of discomfort in driving positions based on the results of a questionnaire survey and body measurements fur slacks, as well testing four types of experimental slacks for comfort and fitness when sitting on a driver's seat and in the standing position. Based on the results, a slacks design for drivers with improved comfort and fitness is suggested.

• 한국자동차공학회논문집
• /
• 제22권5호
• /
• pp.1-4
• /
• 2014

In recent years, requests for automotive seat comfort are increasing. An important issue of them is long-term seat comfort. Until now, the study for long-term seat comfort has been studied mainly using driver's questionnaire, changing adrenalin and electromyography. Actually the results and methodologies of them are difficult to apply to seat development and design because of money and time required. In this study, we developed Seating Feel Curve for seat comfort evaluation and a long-term seat comfort evaluation which can be applied to the development of seat comfort using seat support.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.444-449
• /
• 2001

The purpose of the work is to improve comfort of a car seat, especially dynamic comfort which affects driver's discomfort during the long time driving. Definition of dynamic comfort was made before the investigation of which parameter affects seat comfort. In order to optimize design parameters so as to maximize seat comfort as well as to know the cause of discomfort, benchmarking on a target vehicle and competitive vehicles was performed, which showed both the vibration transmission characteristics and the compression set due to dynamic loading should be reduced. As a solution ball rebounds was increased by about 10％ of the original foam, which showed reduction of S.E.A.T. value by 10％ and of compression set by 60％.

• 감성과학
• /
• 제23권4호
• /
• pp.33-40
• /
• 2020

자동차 고급화 추세에 따라 소비자의 차량 실내 환경에 대한 관심이 증가함에 따라 자동차의 기본적 성능뿐만아니라 실내 쾌적성 향상에 관심이 증대되고 있다. 또한 자동차 실내 쾌적성에 대한 연구는 운전자에게 만족을 제공하는데 그치지 않고, 운전자의 불쾌지수 및 스트레스를 낮추어서 교통사고의 위험을 줄이는데 기여할 수 있기 때문에 매우 중요한 연구 주제이다. 따라서 본 연구에서는 운전자의 뇌파측정을 통해 통풍시트의 온도변화에 따른 쾌적감 변화와 쾌적온도를 알아보고, 온도변화에 따른 남녀간 쾌적감에 대한 차이를 탐색하고자 하였다. 연구결과 첫째 통풍시 트의 온도가 22℃, 25℃, 28℃에서 각각의 실험군을 비교한 결과 28℃보다 25℃에서 통계적으로 유의하게 쾌적감이 더 높게 나타났다. 둘째 통풍시트 온도 변화에 따른 남녀간 쾌적감에 대한 실험결과 남성과 여성이 온도에 따라 느끼는 쾌적감은 통계적으로 유의한 차가 없는 것으로 나타났다. 향후 자동차의 실내온도와 통풍시트의 온도 변화에 따른 운전자의 쾌적감 변화를 파악하여 상관관계를 분석한다면, 운전자의 쾌적성을 확보하여 휴먼에러로 인한 교통사고를 낮출수 있을 뿐만 아니라 자동차의 전기에너지의 사용량을 줄일 수 있을 것이다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.139-145
• /
• 1999

The design of driver's cab includes the structure of cab frame, the layout of driver's cab equipment and facilities, i.e. driver's desk, seat, windows, floor, interior equipment, cab partition etc. The concept applied to the detail design has to be based on the ergonomics to guarantee the safety, comfort, and easy operation for the driver. In the aspect of manufacture, one more factor 'modulization' has to be considered into the design of sub blocks for cost-down. The design has to be implemented in the space allocated for driver's cab, which space is directly determined by the cab frame, optimized for the layout of driver's cab. The design process and results of the driver's cab for KHST will be described in this paper.

• 한국의류산업학회지
• /
• 제13권4호
• /
• pp.582-589
• /
• 2011

The purpose of this study was to investigate problems of design, fitness, suitability for movement, and comfort in current Korean military tank driver's clothing through analysis of actual wearing condition by questionnaire and field evaluation and. to provide basic data for developing a improved design of Korean military tank driver's clothing. The survey was done for 477 military tank driver and the field evaluation was also done for evaluation. The overall satisfaction for design of military tank driver's clothing(3.25) was higher than that for the easiness in wearing and taking off(2.76). The military tank drivers evaluated that current coverall type of clothing is more suitable than two-piece type of clothing. The overall satisfaction for fitness of clothing was as a whole low(2.82~3.09), Especially, the satisfaction for fitness of from front and back rise length was the lowest one. In the satisfaction for clothing materials, the satisfaction for the breathability of material was the lowest, followed by clothing insulation and air permeability. The satisfaction for movement was low in bending waist and raising forward and aside. The part which surveyors think most dissatisfactory was also front and back rise length. The frequency in use of pocket was the highest in chest pocket, followed by waist and pants pockets. The satisfaction for opening easiness of hips opening part was very low(2.64).

• 한국소음진동공학회논문집
• /
• 제18권12호
• /
• pp.1217-1223
• /
• 2008

Vehicle vibration mostly originates from the road excitation and causes discomfort, fatigue and even injury to a driver. Vehicle ride comfort is one of the most important performance indices to achieve a high-quality vehicle design. Since design parameter variations inevitably result in the vehicle ride comfort variance, the variance characteristics should be analyzed in the early design stage of the vehicle. The vehicle ride comfort is often defined by an index which employs a weighted RMS value of the acceleration PSD of a seat position. The design solution is obtained through two steps in this study. An optimization problem to obtain a minimum ride comfort index is solved first. Then another optimization problem to obtain minimum variance of the ride comfort index is solved. For the optimization problems, the equations of motion and the sensitivity equations are derived basing on a 5-DOF vehicle model. The numerical results show that an optimal solution for the minimum ride comfort is not necessarily same as that of the minimum variance of the ride comfort.

• 대한산업공학회지
• /
• 제25권1호
• /
• pp.75-86
• /
• 1999

The improvement of automotive seating system, particularly for the driver, has been the subject of intense interest. In this study, the methods for evaluating the seating comfort are investigated. A subjective evaluation has been the general method for evaluating the seating comfort of automotive seat. Therefore, the survey using the roadside interview is conducted. In addition, the subjective evaluation with a questionnaire using the laboratory set-up is investigated. With this subjective evaluation, in order to evaluate the comfort objectively, the body pressure distribution, seat physical characteristics and eletromygram are investigated. These objective evaluation methods are compared with the subjective evaluation. As a result, the body pressure distribution, seat physical characteristics and electromyogram are recommended as the objective technique for the seating comfort evaluation.

• 한국도로학회논문집
• /
• 제14권4호
• /
• pp.125-131
• /
• 2012

PURPOSES : Road lighting facilities increase the visibility of road at night in order to improve traffic driver safety and comfort. Generally speaking, current pole lighting has a tendency to create problems of glare and flicker. The phenomenon of glare gives discomfort due to increase of scattered light, when high luminance is in driver's field of view. The phenomenon of flicker occurs due to the driver passing through discontinuous pockets of pole lighting areas. These phenomenon increase eye strain and decrease driver safety. METHODS : Low height line lighting that distributes light lower than driver's eye level has been developed and evaluated to reduce the problems linked to current pole lighting. A test was undertaken with 4 conditions(turn on the general pole lighting, turn off alternate pole lighting, turn on the line lighting and line lighting with 50% dimming). A driver written survey was conducted in order to gain driver feedback. RESULTS : Pupil size and brow frequency compared with degree in pole lighting are reduced. CONCLUSIONS : Low height line lighting environment makes drivers more comfortable than pole lighting environment and is positive lighting method in the energy saving and landscape aspect.

• 한국수소및신에너지학회논문집
• /
• 제26권6호
• /
• pp.645-651
• /
• 2015

Numerical study on human thermal comfort in a low floor bus has been conducted. Human thermal comfort in a bus depends mainly on air temperature, air velocity, mean radiant temperature, humidity, and direct solar flux, as well as the level of activity and thermal properties of clothing. The paper presents the velocity and temperature distribution, Predicted Mean Vote (PMV) and Predicted Percentage of Dissatisfied (PPD) indices for the driver and passengers.