• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.143-149
• /
• 2004

In this paper, an automation model for drift design of high-rise buildings using resizing algorithms is proposed. Drift, in the model, includes the maximum lateral displacement at the top and inter-story drifts of a high-rise building subjected to both wind and seismic load. Resizing algorithms for high-rise buildings in various systems and material developed in previous researches are used as a drift control module. As an input to drift control algorithms, member forces for calculation of member displacement participation factors are obtained from commonly-used commercial softwares. The automation model is composed of 4 modules: initial modeling, drift control, stress check, and final verification modules. Each module in the model is described in detail in this paper.

• Current Research on Agriculture and Life Sciences
• /
• 제31권2호
• /
• pp.131-138
• /
• 2013

농용무인 헬리콥터는 벼농사는 물론 전작, 과수 등 소규모 필지의 정밀방제에 이용되고 있으며 농작업의 새로운 패러다임으로 자리 잡고 있다. 본 연구의목적은 농용헬리콥터의 비상시퀀스에서 정지비행 중 측풍에 의해서 비상착륙자리를 이탈하지 않고 위치를 유지하는 편류제어 모듈과 알고리즘의 성능을 평가하는데 있다. 편류제어의 목적은 비상착륙과 연동되어있는데, 비상조건에 도달하게 되면 호버링을 하면서 비상대처 알고리즘이 작동하게 된다. 그러나 관성 제어는 등속운동에서 기체의 움직임을 감지하지 못하게 되고 측풍에 의하여 비상지점으로부터 편류를 하게 되어 착륙 목표지점으로부터 멀어질 수 있다. GPS 모듈을 기초로 개발한 편류제어모듈을 시험하였다. 알고리즘 및 실효성을 고려하여 5 m 직경 내에 위치를 벗어나지 않는지에 대한 기준을 적용하였다. 초기에는 2~4m/s의 측풍 교란에 대하여 과민하게 반응하였지만 이후 5 m 직경 내에서 위치를 벗어나지 않고 자세 및 요의 방향을 유지 하였다. 목도의 관찰에서는 전후좌우 흔들림을 인지하기 어려운 정도이지만, 데이터에서 보인 편위는 GPS 수신기의 특성에 기인하는 것으로 판단한다. 이와 같은 편류제어는 비상착륙이나 호버링을 유지하려 할 때 의도하지 않는 편류를 제어하는데 사용될 수 있다.

• Journal of Astronomy and Space Sciences
• /
• 제27권2호
• /
• pp.145-152
• /
• 2010

In this paper, we developed a local oscillator (LO) system of millimeter wave band receiver for radio astronomy observation. We measured the phase and amplitude drift stability of this LO system. The voltage control oscillator (VCO) of this LO system use the 3 mm band Gunn oscillator. We developed the digital phase locked loop (DPLL) module for the LO PLL function that can be computer-controlled. To verify the performance, we measured the output frequency/power and the phase/amplitude drift stability of the developed module and the commercial PLL module, respectively. We show the good performance of the LO system based on the developed PLL module from the measured data analysis. The test results and discussion will be useful tutorial reference to design the LO system for very long baseline interferometry (VLBI) receiver and single dish radio astronomy receiver at the 3 mm frequency band.

• Biomedical Engineering Letters
• /
• 제8권4호
• /
• pp.365-371
• /
• 2018

Uninterrupted monitoring of multiple subjects is required for mass causality events, in hospital environment or for sports by medical technicians or physicians. Movement of subjects under monitoring requires such system to be wireless, sometimes demands multiple transmitters and a receiver as a base station and monitored parameter must not be corrupted by any noise before further diagnosis. A Bluetooth Piconet network is visualized, where each subject carries a Bluetooth transmitter module that acquires vital sign continuously and relays to Bluetooth enabled device where, further signal processing is done. In this paper, a wireless network is realized to capture ECG of two subjects performing different activities like cycling, jogging, staircase climbing at 100 Hz frequency using prototyped Bluetooth module. The paper demonstrates removal of baseline drift using Fast Fourier Transform and Inverse Fast Fourier Transform and removal of high frequency noise using moving average and S-Golay algorithm. Experimental results highlight the efficacy of the proposed work to monitor any vital sign parameters of multiple subjects simultaneously. The importance of removing baseline drift before high frequency noise removal is shown using experimental results. It is possible to use Bluetooth Piconet frame work to capture ECG simultaneously for more than two subjects. For the applications where there will be larger body movement, baseline drift removal is a major concern and hence along with wireless transmission issues, baseline drift removal before high frequency noise removal is necessary for further feature extraction.

• 한국전산구조공학회논문집
• /
• 제15권2호
• /
• pp.271-279
• /
• 2002

본 연구에서는 횡강성 영향행렬을 이용한 최적설계의 효율성을 높이기 위해 각 층에서 층별 영향행렬을 구하는 계산모듈을 개발하고 가상하중법에 의한 민감도 해석을 수행한다. 아울러 최적설계결과를 실무에 직접 적용할 수 있도록 층별 횡강성 증대계수에 근거하여 횡하중 저항시스템의 부재단면크기를 재산정하는 방안을 강구한다. 이를 위해 단면 재산정 방안은 연속형과 이산형 단면설계법으로 나누어 고려되며, 단면특성과 단면치수와의 관계가 설정된다. 특히 강도구속조건에 대한 초기설계가 먼저 수행된 후 횡변위 구속조건을 초과하는 횡변위를 제어하는데 있어서 횡하중 저항 시스템만이 저항하도록 설계한다. 본 연구에서 제안된 고층건물의 횡변위 제어 및 단면 재산정 방안을 검토하기 위해 두 가지 형태의 45층 삼차원 구조물이 고려된다.

• Journal of the Optical Society of Korea
• /
• 제16권4호
• /
• pp.401-408
• /
• 2012

The amplitude error of phase modulator used in closed-loop fiber optic gyroscope has occurred by the temperature dependency of the electro-optic coefficient, and also can be due to the square-wave dither signal which is generally applied for eliminating the deadzone. This error can cause bias drift and scale factor error. This paper analyzes the temperature dependency of the modulation amplitude and the relationship with the scale factor of the gyroscope, and deals with an amplitude control method. The error calculation logic considering the dither signal is implemented on the signal processing module. The result of experiments from a prototype gyroscope shows the effect of the modulation amplitude control and a considerable improvement on performances.

• 제어로봇시스템학회논문지
• /
• 제14권9호
• /
• pp.893-897
• /
• 2008

To achieve the challenges of low-cost MEMS gyros for the precise self-localization of mobile robots, this paper examines an effective method of minimizing the drift on the heading angle that relies solely on integration of rate signals from a gyro. The main idea of the proposed approach is to use wavelet de-noising filter in order to reduce random noise which affects short-term performances. The proposed method was applied to Epson XV3500 gyro and the performances are verified by the comparisons with an existing commercial gyro module of vacuum cleaning robots.

• 한국산학기술학회논문지
• /
• 제15권8호
• /
• pp.5219-5226
• /
• 2014

본 논문에서는 확률신경망 이론을 적용하여 GPS 단절구간에서 보행자의 위치정보의 정확도를 향상시키는 기법을 제안한다. 일반적인 보행 외 옆으로 걷기, 오리걸기, 기어가기 등 여러 보행 형태에 대한 보행 패턴을 학습하고 이에 대한 이동거리를 구하여 관성항법의 적분오차를 최소화하도록 한다. 제안 시스템은 보행자가 휴대할 수 있는 소형/경량화/저전력 설계된 H/W 모듈 형태로 구현을 하였으며, 건물 내에서의 보행자 이동 실험을 통해 제안 시스템의 성능을 검증하였다.

• 제어로봇시스템학회논문지
• /
• 제19권6호
• /
• pp.569-575
• /
• 2013

This paper proposes a method for PDR (Pedestrian Dead-Reckoning) using a low cost IMU. Generally, GPS has been widely used for localization of pedestrians. However, GPS is disabled in the indoor environment such as in buildings. To solve this problem, this research suggests the PDR scheme with an IMU attached to the pedestrian's waist. However, despite the fact many methods have been proposed to estimate the pedestrian's position, but their results are not sufficient. One of the most important factors to improve performance is, a new calibration method that has been proposed to obtain the reliable sensor data. In addition to this calibration, the PDR method is also proposed to detect steps, where estimation schemes of step length, attitude, and heading angles are developed. Peak and zero crossings are detected to count the steps from 3-axis acceleration values. For the estimation of step length, a nonlinear step model is adopted to take advantage of using one parameter. Complementary filter and zero angular velocity are utilized to estimate the attitude of the IMU module and to minimize the heading angle drift. To verify the effectiveness of this scheme, a real-time system is implemented and demonstrated. Experimental results show an accuracy of below 1% and below 3% in distance and position errors, respectively, which can be achievable using a high cost IMU.