• Journal of Science Education
• /
• v.32 no.2
• /
• pp.121-145
• /
• 2008

The purposes of this study were to identify the misconceptions that students have on the magma and plate tectonics and to present the implications in developing textbooks as well as related curriculum of high school textbooks. Data were collected through questionnaire, consisting of some questions, short essays, and descriptive drawings, developed by the research team. A total of 140 high school students(9th graders) responded to those questionnaires and were interviewed for further information. It was reported that participants displayed various misconceptions related to magma and plate tectonics. The identified misconceptions are as follows: For the definition of magma, the 31% of participants misunderstood magma as lava. In respect to the generative mechanism of magma at subduction zone, over 90% of students responded that it is generated by frictional heat. The source of misconceptions were identified as a result from textbooks and related reference-books. For the concept of plates, 87% of students conceived 'crust or a lower part of the plates' as 'plates'. Most participants hold the right concept of oceanic ridge, whereas, 66% of them considered 'rift valley' as either 'divergence of continental plates' or 'converging boundary'. 63% of them defined 'collision boundary of continental plate' as either 'subduction zone' or 'diverging boundary'. For the definitions of the trench and Benioff zone, 86% of students responded them as the place of subduction or differing density between two converging plates. The students' misconceptions were resulted from the errors and insufficient explanation, inappropriate figures, and data presented in textbooks, reference-books, lecture, and web sites. The results of this study are implied to contribute the improvement of students' misconceptions.

• Journal of the Korean earth science society
• /
• v.30 no.1
• /
• pp.111-126
• /
• 2009

The purpose of this study was to derive the criterions of each type of mental models on the plate boundaries and to investigate high school students' mental models on these concepts. The 11th grade student participants were requested to draw the collisional, convergent, and divergent boundaries and were interviewed individually. The drawings and the data gathered through the interviews were analyzed qualitatively. The mental models on the plate boundaries were classified as 'naive model', 'unstable model', 'causal model', and 'conceptual model'. The criterions for analyzing the mental models were the differentiations of the lithospheric plates and the mantle, the explanations of the motion of the plates and lower mantle, the demonstrations of topographical features of the plate boundaries and the causal relationships between the mantle convection and the topographical features. The findings revealed that the students holding 'the naive model' and 'the unstable model' were unable to relate the mantle convection and the three boundaries. In contrast, the students holding 'the causal model' and 'the conceptual model' were able to explain that the mantle convection causes the three boundaries. Also, the types of epistemological belief were different depending on their mental models. Students holding the naive model and the unstable model tended to rely upon the external authorities.

• Journal of Korean Home Economics Education Association
• /
• v.15 no.3
• /
• pp.13-28
• /
• 2003

This study presents a development of internet-based consumer education program for children. We also investigate how this program affects on the children's consumer competency and how much children are interested in this program. This program consists of 6 domains: the concept of consumer. wants and scarcity. advertisement, tips on purchasing. consumer's rights. and consumer's problem imd solutions. In order to attract children. multimedia data such as pictures. drawings. and animations were included in designing the screens. The subjects of this study were 40 children at forth grade to participate in consumer education program. Surveys were conducted twice to collect data for consumer competency and children's interest in the program. According to the results of t-test. We found that consumer education has a positive effect on consumer knowledge and consumer-role attitude but has not a positive effect on consumer skill. We also found that children's interest on this program was very high.

• 대한공업교육학회지
• /
• v.33 no.2
• /
• pp.259-272
• /
• 2008

In order to improve the productivity and quality of boat's mold in leisure boat industry, the development of modelling and machining technology of leisure boat's plug is strongly required. The traditional lines drawing approach by hand required the designer to both create fair curves and to make sure that the curves matched up to each other in the three main drawing views: profile, plan, and section. However, one will find when studying lines drawings in books that the curves might look smooth and fair, but the lines do not agree exactly in the three views. Therefore, the 2 dimensional drawing data of leisure boat are transformed using 3 dimensional design s/w and CAM s/w. In addition, the leisure boat is designed with a 3 dimensional s/w. The NC cutting data are generated by the CAM s/w. The surface characteristics of machined surface are investigated at various cutting conditions such as spindle speed, feed speed, and cutting material.

• Journal of Distribution Science
• /
• v.13 no.3
• /
• pp.51-60
• /
• 2015

Purpose - Among potential marketing strategies, the most efficient method to encourage purchase intention is through sales promotions. Sales promotions also serve to enhance customer satisfaction, which is closely related to the incidence of repurchases. Therefore, the success of retail stores greatly depends on the effectiveness of their promotional activities. The present study aimed to obtain the necessary information for apparel stores to establish more effective promotional activities. To this end, the study's specific research questions were to examine 1) consumer satisfaction with the recent sales promotions of retail apparel stores, 2) the levels of consumer preferences for different types of sales promotions (cash discounts, promotional gifts, prize drawings, discount coupons, stamp cards, or mileage cards), and 3) the differences in purchase intention according to preference levels for different types of sales promotions. Research design, data, and methodology - The research employed a descriptive survey method using a self-administered questionnaire. The sample consisted of 700 men (n=234) and women (n=466) ranging in age from their 20s to their 50s and residing in the Seoul area. Data were analyzed through methods including factor analysis as well as Cronbach's α coefficients, the t-test, ANOVA, and the Duncan test. Results - Differences among consumer preferences were identified for each type of sales promotion according to the purchase amount and the customer's age. In relation to purchase amounts below 500,000 won, participants in their 50s have lower preferences for price discounts than those in their 20s or 30s, whereas participants in their 40s or 50s have lower preferences for stamp cards and mileage cards than those in their 20s. When the purchase amount is greater than 500,000 won, housewives have higher preferences for promotional gifts than respondents with other occupations. However, no gender differences were found with regard to preference levels for the different types of sales promotions. Respondents generally exhibited mediocre satisfaction with the sales promotion events of retail apparel stores. They also expressed negative opinions about sales promotions when such promotions lead to high prices, as well as dissatisfaction with the poor quality of promotional gifts. It was also found that, regardless of the purchase amount, the groups with higher preferences for discount coupons and mileage cards displayed higher purchase intentions. Only when the purchase amount is greater than 200,000 won did the group with higher preferences for lottery system promotional gifts express higher purchase intentions. On the other hand, for all purchase amount sizes, there were no differences in purchase intentions according to preferences for cash discounts, promotional gifts, or stamp cards. Conclusions - The results revealed that greater effort must be devoted to enhancing consumers' satisfaction levels with the promotional activities performed by apparel retail stores. The results also showed that it is necessary to differentiate among sales promotion strategies according to preference levels for different types of sales promotions, purchase amounts, and target consumer ages.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.14
• /
• pp.257-287
• /
• 2000

Many problems and complaints have been caused by applying the UCP to the standby credit. To solve the problem, International Standby Practices were established. ISP and UCP are similar in that both of them generally regulate the transaction of credit. However, when the ISP is compared with the UCP, the following features are found : 1. In the UCP, when Force Majeure such as acts of God or strikes cause temporary work stoppage, the expiration date cannot be extended. In the ISP, the expiration date can be extended to 30 days afte the place for presentation re-opens for business in the same situation. 2. The UCP does not specify who the issuer of a document must be because there can be many issuers of documents. In the ISP, it is specified that all required documents are to be issued by the beneficiary. 3. In the UCP, compliance between presented documents is required. In the ISP, a discrepancy between presented documents is allowed. 4. In the UCP, if drawings and/or shipments are required by a credit to be made in instalments, and a required drawing/instalment is not made, the credit ceases to be available for any subsequent instalment. In ISP, there is no loss of effect and no influence on the right of beneficiaries, even in the same situation. 5. In the UCP, multiple transfers are not permitted, but partial transfers are. ISP states just the opposite. Multiple transfers are permitted, but partial transfers are not. 6 The UCP obligate each bank (issuer, confirming and nominated bank) to complete their review within a 'reasonable time' but not more than seven banking days. In the ISP, less than three business days is deemed to be not unreasonable and more than seven days is deemed to be unreasonable. 7. ISP, unlike UCP, recognizes that issuers and confirmers may spread their risk through syndication and participation of standby credits. However, the thing to remember is that the ISP should be reviewed carefully before application. If necessary, a partial addition or modifications can be made. Usually, the best advantage of the ISP is given to the issuers. A positive use of the ISP can be made by issuers but, applicants should consider using the UCP to the their rights and duties.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.5
• /
• pp.45-54
• /
• 2010

Recently more and more construction projects have become high-rise, complex and intelligent. Accordingly, such projects require an integrated management system for tasks, with a lean approach to construction with work processes for management and productivity. In particular, Construction Information Technology (CIT) fields are concerned with Building Information Modeling (BIM), which represents the process of generating and managing building data during its life cycle. Constructability research has progressed for the project goal which is a cost-time-quality of optimization by integrated construction knowledge and experience. However, the current constructability process has not been performed efficiently, as the existing 2D drawings and papers lack consistent and accurate information, it is difficult to share the contents of work, and the use of information is inefficient. This study proposes that the reformation and enhancement of BIM-based constructability work process can lead to brilliant performance in the framework of the construction phase through achieving collaboration between the design team and the workers at the site.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.2
• /
• pp.171-181
• /
• 2020

Recently, free-formed construction technology is becoming a new measure of representing technological superiority and sociocultural ingenuity. However, the CNC processing technology utilizing the existing wood and iron form has limitations in terms of the manufacturing time and material cost. Therefore, in this study, the method and process of manufacturing free-formed EPS form using S-LOM-based 3D printing technology were suggested. Furthermore, through the mock-up test, a comparative analysis of the manufacturing time and precision with CNC milling technology was conducted. The results show that S-LOM-based 3D printing technology has reduced manufacturing time about 57.4% compared to CNC milling technology during the free-formed EPS form manufacturing process. In addition, compared to the design drawings, the maximum error value was 20.5mm, proving the applicability of S-LOM-based 3D printing technology. The results of this study are expected to contribute to the improvement of S-LOM method and the activation of S-LOM method by verifying the applicability of S-LOM-based 3D printing technology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.355-361
• /
• 2018

Mining is important as a national key industry that supplies energy and raw materials that are the basis for industrial development. On the other hand, mine development is necessarily accompanied by mineralization, for example, ground subsidence, heavy metal pollution, and water pollution. The mine hazard has a large range of damage, and it takes much time and cost to recover. In addition, there is a need for systematic mining management in order to prevent damages from occurring continuously. In this study, the present status of domestic mining industry and geospatial information construction technology for mining management were investigated. 95% of the mines surveyed were nonmetallic, and limestone mines accounted for 67%, and the constructed mine spatial information is not constructed with 3D geospatial information due to 2D current status, section, and geological map. Considering the results of the survey and analysis of 3D laser scanner and characteristics of Korean mine, handheld scanner is considered to be the most suitable method for constructing mine geospatial information. In addition, the data acquired through the 3D laser scanner can effectively visualize the object, and it can contribute to the systematic management of mining because it can be used for various purposes such as generation of drawings and calculation of volume.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.552-557
• /
• 2020

The Radar Cross Section (RCS) is a virtual region indicating the strength of a wavelength at which a radar signal is reflected and received. As the ship's RCS represents its own stealth performance and survivability, efforts have been made in various areas from design to construction to reduce the RCS. The RCS can be predicted using design drawings and CAD models, but it is necessary to measure the RCS at sea since sea clutter and multipath reflections occur in the sea environment. However, such RCS predictions and measured values provide only a simple relative magnitude to the user, and there has not been much research on this topic. In this paper, a missile countermeasure technique was studied using 3D RCS measurement data in an operating environment. The elevation and azimuth angle of the ship viewed from the missile were estimated using the location information of the missile, and the RCS value was inverted by mapping it to previously measured 3D RCS measurement data. In addition, by using the movement information of the missile, the RCS observed by the missile could be predicted in advance, and this method can be used to propose a response plan based on the maneuvering and chaff system.