• Korean Association of Arts Management
• /
• no.52
• /
• pp.5-37
• /
• 2019

Despite a copious volume of work on the relationship between social class and cultural consumption, scholars have paid scant attention to the increasingly apparent observation that a vast majority of the population exhibits indifference toward fine arts regardless of one's socio-economic status. Much of the prior literature on cultural consumption has treated the public's indifference to fine arts not as a distinct analytical category that deserves an explanation of its own, but simply as the opposite of "likes" or the act of consumption, let alone being disentangled from the concept of "dislikes" in taste-formation and consumption behavior. In this paper, we suggest that the seemingly increasing trend toward indifference to fine arts, especially among those who are part of the well-educated and economically well-off, merits close scholarly attention on its own term. As an initial step toward this endeavor, we explore the factors behind indifference toward fine arts among Korean middle-class, using the ground theory method. Our interview findings reveal that much of indifference toward fine arts is attributable to the lack of tastes in fine arts and artistic competence. Our results suggest that research drawing on Bourdieu's theory and Peterson's omnivore hypothesis needs to be further revised through an in-depth investigation of the institutional and societal contexts where art education takes place in Korea. We discuss the implications of our findings for policy-making in the cultural and artistic sphere.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.6
• /
• pp.701-708
• /
• 2017

The construction cost is estimated based on the drawings at the design stage and constructor will find efficient construction methods for budgeting and budgeting appropriate to the budget. Accurate quantity estimation and budgeting are critical to determining whether the project is profitable or not. However, since this process is mostly performed depending on manpower or 2D drawings, errors are likely to occur and The BIM(Build Information Modeling) program, which can be automated, is very expensive and difficult to apply in the field. In this study, 3D architectural modeling was performed using SketchUp which is a 3D modeling software and suggest a methodology for Quantity Estimation. As a result, 3D modeling was performed effectively using 2D drawings of buildings. Based on the modeling results, it was possible to calculate the difference of the quantity estimation by 2D drawing and 3D modeling. The research suggests that the 3D modeling using the SketchUp and the calculation of the quantity can prevent the error of the conventional 2D calculation method. If the applicability of the research method is verified through continuous research, it will contribute to increase the efficiency of architectural modeling and quantity Estimation work.

• Asia pacific journal of information systems
• /
• v.24 no.3
• /
• pp.299-323
• /
• 2014

The reason location based service is drawing attention recently is because smart phones are being supplied increasingly. Smart phone, basically equipped with GPS that can identify location information, has the advantage that it can provide contents and services suitable for the user by identifying user location accurately. Offering such diverse advantages, location based services are increasingly used. In addition, for use of location based services, release of user's personal information and location data is essentially required. Regarding personal information and location data, in addition to IT companies, general companies also are conducting various profitable businesses and sales activities based on personal information, and in particular, personal location data, comprehending high value of use among personal information, are drawing high attentions. Increase in demand of personal information is raising the risk of personal information infringement, and infringements of personal location data also are increasing in frequency and degree. Therefore, infringements of personal information should be minimized through user's action and efforts to reinforce security along with Act on the Protection of Personal Information and Act on the Protection of Location Information. This study aimed to improve the importance of personal information privacy by empirically analyzing the effect of perceived values on the intention to strengthen location information security and continuously use location information for users who received location-based services (LBS) in mobile environments with the privacy calculation model of benefits and risks as a theoretical background. This study regarded situation-based provision, the benefit which users perceived while using location-based services, and the risk related to personal location information, a risk which occurs while using services, as independent variables and investigated the perceived values of the two variables. It also examined whether there were efforts to reduce risks related to personal location information according to the values of location- based services, which consumers perceived through the intention to strengthen security. Furthermore, it presented a study model which intended to investigate the effect of perceived values and intention of strengthening security on the continuous use of location-based services. A survey was conducted for three hundred ten users who had received location-based services via their smartphones to verify study hypotheses. Three hundred four questionnaires except problematic ones were collected. The hypotheses were verified, using a statistical method and a logical basis was presented. An empirical analysis was made on the data collected through the survey with SPSS 12.0 and SmartPLS 2.0 to verify respondents' demographic characteristics, an exploratory factor analysis and the appropriateness of the study model. As a result, it was shown that the users who had received location-based services were significantly influenced by the perceived value of their benefits, but risk related to location information did not have an effect on consumers' perceived values. Even though users perceived the risk related to personal location information while using services, it was viewed that users' perceived value had nothing to do with the use of location-based services. However, it was shown that users significantly responded to the intention of strengthening security in relation to location information risks and tended to use services continuously, strengthening positive efforts for security when their perceived values were high.

• Journal of Conservation Science
• /
• v.31 no.1
• /
• pp.21-27
• /
• 2015

The Phoenix-shaped Glass Ewer, which is No. 193 National Treasure, was seriously damaged by a unique form of green glass pieces when excavated among a number of burial accessories of Hwangnamdaechong known to have been formed in the 5th century. While it has long been exhibited at the National Museum of Korea since its treatment for conservation treatment at conservation science laboratory in 1984, the existing adhesive materials seriously deteriorated for the 30 years, and the condition was quite unstable. The epoxy resin used as a restorative materials turned yellowing due to the light and heat so much that it was no longer able to exhibit it in a stable and effective manner. As a result, a re-treatment for conservation was conducted lately. This study focuses on the three pieces of Gold wires used to carefully wrap up the handle of the Phoenix-shaped Glass Ewer broken into three pieces, which has not been studied so far. As for the analysis method for Gold wires, SEM-EDS and Stereo Microscope were used for nondestructive analysis. First of all, the result of the SEM-EDS analysis shows that the composition was Au 91.9 wt.%-Au 92.8 w.t% and Ag 5.9 wt.%-Ag 6.5 wt.%, which indicates that it was an alloy made of Au and Ag. The production technique of Gold wires was also observed by means of optical microscopes. In general, Gold wires were manufactured by a drawing process in which a lump of gold was beaten or pulled out of a hole or by a process of twisting a gold plate. However, Gold wires separated from the handle of the Phoenix-shaped Glass Ewer did not involve any trace of twisting on the surface. Rather, fine vertical stripes were observed with the sections filled up. Hence, it is thought that this Ewer went through a drawing process and then was mended. As a result, no certain relation with the golden mending material used for the Phoenix-shaped Glass Ewer was verified. The findings above indicate that most of the existing researches on Gold wires recognized them, not as separate remains, but merely as a component of other golden remains. Thus, there has been little systematic study on the manufacturing techniques of Gold wires. The future study on Gold wires may verify the correlation between the Gold wires used to fix the handle of the Phoenix-shaped Glass Ewer, which is examined in this study, with that of golden remains in the Silla era.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.1
• /
• pp.1-11
• /
• 1986

Welded connectors of the cover plates, the transverse stiffeners of the plate girders, and the gusset plates of the plates girders or box girders, were selected as studying objects. A simplified method of drawing the S-N curves in these welded joints by a computer program without the direct fatigue tests was established. The plots on the S-N curve using the values from the practical fatigue tests were compared with the results from the method of the computer programming. The results of these studies are as follows. It appeared that the fatigue life by calculation method was a little less than the practical fatigue life from the actual tests. The latter values included both life $N_c$ of occurrence of initial crack $a_i$ and the life $N_p$ of propagation of critical crack. On the other hand, the former values included only the life $N_p$. Therefore, these results should be considered as justifiable ones. Since the difference between the two results was not significant, the results by calculation method should be in the conservation side when the safety of the structures was considered. Consequently, the results by calculation method should be applicable to the fracture fatigue design of structure. For reference, the same fatigue tests were performed with the specimens of 3 pieces in each case made of the low-strength steel, SS 41. The results went unexpected showing that the fatigue strength was lower in the case of low-strength steel. That is, in the case of the cover plate, the fatigue strength became slowly higher than the case of high-strength steel, SWS 50. That was observed when the maximum testing stress was higher than $14kg/mm^2$. In addition, in the case of the transverse stiffener, the fatique strength became rapidly higher than the case of SWS 50. That was observed when the maximum testing stress was lower than $31kg/mm^2$. It was thought that more such fatigue tests should be performed for more reliable results.

• Journal of Wetlands Research
• /
• v.21 no.1
• /
• pp.34-42
• /
• 2019

Baseflow which is one of the unmeasurable components of streamflow and slowly flows through underground is important for water resource management. Despite various separation methods from researches preceded, it is difficult to find a significant separation method for baseflow separation. This study applied the MRC method and developed the improved approach to separate baseflow from total streamflow hydrograph. Previous researchers utilized the whole streamflow data of study period at once to derive synthetic MRCs causing unreliable results. This study has been proceeded with total nine areas with gauging stations. Each three areas are selected from 3 domestic major watersheds. Tool for drawing MRC had been used to draw MRCs of each area. First, synthetic MRC for whole period and two other MRCs were drawn following two different criteria. Two criteria were set by different conditions, one is flow condition and the other is seasonality. The whole streamflow was classified according to seasonality and flow conditions, and MRCs had been drawn with a specialized program. The MRCs for flow conditions had low R2 and similar trend to recession segments. On the other hand, the seasonal MRCs were eligible for the baseflow separation that properly reflects the seasonal variability of baseflow. Comparing two methods of assuming MRC for baseflow separation, seasonal MRC was more effective for relieving overestimating tendency of synthetic MRC. Flow condition MRCs had a large distribution of the flow and this means accurate MRC could not be found. Baseflow separation using seasonal MRC is showing more reliability than the other one, however if certain technique added up to the flow condition MRC method to stabilize distribution of the streamflow, the flow conditions method could secure reliability as much as seasonal MRC method.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.2
• /
• pp.74-80
• /
• 2015

Purpose Breast lymphoscintigraphy is an important technique to present for body surface precisely, which shows a lymph node metastasis of malignant tumors at an early stage and is performed before and after surgery in patients with breast cancer. In this study, we evaluated several methods of body outline imaging to present exact location of lesions, as well as compared respective exposure doses. Materials and Methods RANDO phantom and SYMBIA T-16 were used for obtaining imaging. A lesion and an injection site were created by inserting a point source of 0.11 MBq on the axillary sentinel lymph node and 37 MBq on the right breast, respectively. The first method for acquiring the image was used by drawing the body surface of phantom for 30 sec using $Na^{99m}TcO_4$ as a point source. The second, the image was acquired with $^{57}Co$ flood source for 30 seconds on the rear side and the left side of the phantom, the image as the third method was obtained using a syringe filled with 37 MBq of $Na^{99m}TcO_4$ in 10 ml of saline, and as the fourth, we used a photon energy and scatter energy of $^{99m}Tc$ emitting from phantom without any addition radiation exposure. Finally, the image was fused the scout image and the basal image of SPECT/CT using MATLAB$^{(R)}$ program. Anterior and lateral images were acquired for 3 min, and radiation exposure was measured by the personal exposure dosimeter. We conducted preference of 10 images from nuclear medicine doctors by the survey. Results TBR values of anterior and right image in the first to fifth method were 334.9 and 117.2 ($1^{st}$), 266.1 and 124.4 ($2^{nd}$), 117.4 and 99.6 ($3^{rd}$), 3.2 and 7.6 ($4^{th}$), and 565.6 and 141.8 ($5^{th}$). And also exposure doses of these method were 2, 2, 2, 0, and $30{\mu}Sv$, respectively. Among five methods, the fifth method showed the highest TBR value as well as exposure dose, where as the fourth method showed the lowest TBR value and exposure dose. As a result, the last method ($5^{th}$) is the best method and the fourth method is the worst method in this study. Conclusion Scout method of SPECT/CT can be useful that provides the best values of TBR and the best score of survey result. Even though personal exposure dose when patients take scout of SPECT/CT was higher than another scan, it was slight level comparison to 1 mSv as the dose limit to non-radiation workers. If the scout is possible to less than 80 kV, exposure dose can be reduced, and also useful lesion localization provided.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.25 no.3
• /
• pp.117-131
• /
• 2012

Objectives: This study was designed to observe the effect of chuna manupulation in alleviating the symptoms of postpartum patients with low back pain and pelvic girdle pain. Methods: Targeted by outpatient 30 postpartum patients, A group was patients who were treated with acupuncture, traditional Korean medicine, physical therapy, B group was patients who were treated with acupuncture, traditional Korean medicine, physical therapy, and chuna manupulation. After 2-months, the progress of symptoms was evaluated by visual analogue scale(VAS) and Oswestry Disability Index(ODI) and Pain drawing. Results: 1. Group A and B were analyzed for general characteristics, with an average age of both groups, average weeks at admission after delivery, parity and method of delivery, weight gain and BMI during pregnancy were no significant differences in. 2. VNRS improvement in the rate of group A was $2.84{\pm}4.73$, VNRS improvement in the rate of group B was $4.85{\pm}1.49$. Between the two groups was statistically significant. 3. ODI improvement rate in group A was $10.14{\pm}4,39$, ODI improvement rate in Group B was $15.16{\pm}3.41$. Between the two groups was statistically significant. 4. Patients who received acupuncture, traditional Korean medicine, physical therapy, and chuna manupulation. in group B compared pubis, thighs, buttocks showing more effective in pain relief than group A, who received only acupuncture, traditional Korean medicine, physical therapy. Conclusions: In case of postpartum patients with low back pain and pelvic girdle pain, it is more effective to treat with Integrated traditional Korean therapy and chuna manupulation than to treat with only integrated traditional Korean therapy.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4D
• /
• pp.397-406
• /
• 2012

Contributed acceptance system is causing problems with the usefulness and follow-up services and the like, other than the origin purpose which needs to be operated as rational adjustment method between the public interest and the private. Accordingly, this study has examine the problems by analyzing the present condition of practical public facilities and has the purpose on drawing the improvements by conducting consciousness survey from in substance users. The problems drawn from the analysis and the survey are location and position of the public facilities by reason of making public facilities at leftover land, the awareness and use as in-site facilities, creating street facilities without considering the use and safety of the users, follow-up service issues and the usefulness issues by creation without considering the surrounding conditions. The proposal of improvements for efficient operation by each problems are devising plans by considering location and position of the facilities for utilization and usefulness, secondly the necessity of the public relations for the improvements of the utilization of public facilities. thirdly, conducting the legal obligation by installing direction boards for its awareness of public facilities and delegating operation of facilities to public corporations such as SH, LH and inhabitants for efficient follow-up services, lastly, establishing the public facility map service which could figure out the surrounding conditions of public facilities to utilize for the contributed acceptance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4D
• /
• pp.377-386
• /
• 2012

Crack sealing has been widely used in the pavement maintenance due to its advantage of repairing the cracks at the preliminary stages. However, it has been analyzed that the crack sealing work process is dangerous and labor intensive. Moreover, quality and productivity of crack sealing work are highly depended on labor experience and skills. Therefore, various crack sealing machines have been researched but revealed many limitations in practical application. This research analyses conventional crack sealing work process and previously developed crack sealing machines in order to develop an automated pavement crack sealing machine which can be practically and widely applied in the construction fields. This paper develops the previously proposed conceptual design by drawing detailed designs and fabricating the hardware(manipulator and end-effector) of the automated pavement crack sealing machine. The crack sealing machine suggested in this paper overcomes limitations of existing crack sealing machines and designed to meet the domestic road conditions and regulations. It is expected that automating the conventional crack sealing method contributes to the improvement of quality, economy and reduce accidents.