• 한국산학기술학회논문지
• /
• 제18권6호
• /
• pp.330-335
• /
• 2017

최근 자동차 산업에서 전기 모터 연료 전지에 대한 수요가 급증했으며, 연료 전지 케이스로 사용되는 사각형 알루미늄 캔에 대한 수요 또한 증가하고 있다. 직사각형 배터리 케이스의 바닥에 있는 에어 벤트는 비정상적으로 높은 압력이 발생할 때 미리 압력을 방출하여 큰 폭발을 방지하는 역할을 한다. 직사각형 컵 배터리 케이스는 6 단계의 다단계 딥 드로잉으로 외형을 만들고 직사각형 배터리 케이스와 용접하여 벤트 부품을 제작해왔다. 그러나 본 연구에서는 직사각형 케이스의 바닥면에 공기 벤트 형상을 직접 추가 하는 연구를 수행하였다. 단조의 초기 형상으로는 사각 컵 다단식 딥 드로잉 성형 해석에서 추출한 두께와 형상을 이용한 유한 요소 해석 기법을 사용 하였다. 그 결과, 예측 정밀도가 향상되고, 배부름 및 파단 등의 결함을 미리 예측할 수 있었다. 초기 분석 결과를 토대로 두 가지 단조 형상이 후보로 제시되었고 성형 해석을 통해 최적의 단조 형상을 결정 하였다. 이러한 결과를 바탕으로 금형을 제작하고 실제 결과와 분석 결과를 비교하여 본 연구의 타당성을 검증하였다.

• Design & Manufacturing
• /
• 제17권3호
• /
• pp.21-27
• /
• 2023

The mold industry in Japan, an advanced country in the mold industry, is also at a point of great change. The main causes are the Ukraine crisis and the collapse of the global supply chain (parts supply chain) caused by COVID-19. In addition, the prices of overseas products are rising sharply due to rapid exchange rate fluctuations (decrease in the value of the yen). Until now, Japan's monotsukuri industry has been actively pursuing overseas expansion, riding the trend of globalization. However, the trend began to rapidly reverse, and now the monotsukuri industry that had expanded overseas is showing a tendency to return to Japan. Another factor of change is the change in the automobile industry, which is the most demanded product in the mold industry. As the automobile industry evolves from gasoline cars to electric cars, the number of parts that make up a car will drastically decrease. This trend is expected to increase the demand for small-scale production of a variety of products in the mold industry, and furthermore, it is expected that short delivery times will be required in parts development. As in Korea, the production population working in the mold industry is rapidly decreasing in Japan as well. Even if you add up the total population working in manufacturing in Japan, it only accounts for about 15%. Even in Japan, it is judged that it will be difficult to sustain the monotsukuri industry with this small production population. Therefore, since improvement in production efficiency cannot be expected with the same manual dexterity as before, the mold industry is also demanding the development of mold technology at a different level than before to increase productivity. In this paper, I would like to introduce new Japanese mold technology collected through attending the Intermold exhibition. This is an example of applying a dedicated pin (Gastos) to a mold to prevent an increase in internal pressure during plastic injection molding, and a deep drawing press molding technology with an inherent hydraulic function.

• 공업화학
• /
• 제17권3호
• /
• pp.267-273
• /
• 2006

Melt-blown 방사법으로 Ba-ferrite 포함하는 PP 복합수지를 방사하여 부직포 섬유를 제조하는 공정에서 방사공정인자와 부직포 특성과의 상관관계를 조사하였다. PP 수지와 Ba-ferrite 분말을 혼합한 후 단축 압출 성형기를 이용하여 펠렛 형태로 제조하고 Melt-blown 섬유 방사기를 이용하여 screw turning force (rpm)와 DCD (die-to-collector distance)를 변화시켜 Ba-ferrite 분말이 부직포 섬유의 기계적, 열적, 결정학적 및 자성 특성에 미치는 영향을 조사하였다. SEM 관찰을 통하여 방사 거리가 증가할수록 혹은 screw turning force가 감소할수록 부직포 섬유의 연신율이 증가하고, 섬유의 직경 및 인장강도가 감소하는 것을 알 수 있었고, XRD 측정 결과로부터 방사거리의 증가는 섬유의 결정성을 높이는 것으로 관찰되었다. 복합 부직포에서는 입자가 고분자와 분리되어 고분자와 입자간의 결합력이 떨어져 순수한 PP대비 인장강도가 감소하였다. Ba-ferrite 분말에 의한 부직포의 자성적 성질을 보면 방사거리에 따라 보자력, 최대 자화, 잔류 자화 값은 감소하였다. TGA 측정을 통한 부직포 섬유의 내열성 시험 결과는 방사거리의 감소에 따라 내열성이 증가하였으며 난연성은 Ba-ferrite 분말의 함량 증가에 따라 증가하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.591-594
• /
• 2000

This paper describes a research work of developing a computer-aided design of product with bending and piercing for progressive working. An approach to the system for progressive working is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer and is composed of four main modules, which are input and shape treatment, flat pattern layout, strip layout and die layout module. Based on knowledge-based rules, the system is designed by considering several factors such as radius and angle of bend, material and thickness of product, complexities of blank geometry and punch profile, bending sequence, and availability of press. Strip layout drawing generated by the piercing processes with punch profiles divided into for external area is simulated in 3-D graphic forms, including bending sequences for the product with piercing and bending. Results obtained using the modules enable the manufacturer for progressive working of electronic products to be more efficient in this field.

• 한국CDE학회논문집
• /
• 제13권2호
• /
• pp.139-152
• /
• 2008

In order to survive worldwide competition, today's industries are experiencing strong pressure to introduce higher quality products with lower cost and shorter lead-time. Therefore, the role of design in the process of product development is increasing in significance. In this research, two methods for improving the design capability are proposed: construction of design environment and design automation using 3D CAD system. The designers and design process are the core of product design using 3D CAD system. In order to maximize the design performance, construction of the design environment including selection of a suitable system, designer training for best use of the system, establishment of an efficient design process, and stabilization of the environment are required. A method is suggested to construct design environment by systematizing the contents of the projects and consulting experiences carried out for various categories of business such as electronic devices, motorcycles, electricity parts, sanitary wares, injection molds, and die casing molds. Design automation helps reduce tedious and time-consuming jobs, simplify complicated and error-prone modeling and drawing works to shorten the lead time and improve the product quality. To develop a design automation system, understanding the process and the related knowledge on design are very important before implementing the system using API provided by 3D CAD system. In this research, an eight-step procedure is proposed for the development of a design automation system. These eight steps are analysis of needs, determination of specification, verification of specification using 3D CAD system, inspection of related API functions, programming, field test, application in practice, and maintenance. A case study in which five design automation systems in the design of turbine generators using the proposed method is introduced in detail. These systems play important roles in the generation of various output items including 3D models, drafts, material information, and NC data. The case study shows how effectively the design time is reduced and the quality improved using those systems.

• Advances in aircraft and spacecraft science
• /
• 제3권1호
• /
• pp.61-75
• /
• 2016

Climate changes brought on by human interventions have proved to be more devastating than predicted during the recent decades. Recognition of seriousness of the situation has led regulatory organisations to impose strict targets on allowable carbon dioxide emissions from automotive vehicles. As a possible solution, it has been proposed that Fibre Metal Laminate (FML) system is used to reduce the weight of future vehicles. To facilitate this investigation, FML based on steel and self-reinforced polypropylene was stamp formed into dome shapes under different blank holder forces (BHFs) at room temperature and its forming behaviour analysed. An open-die configuration was used in a hydraulic press so that a 3D photogrammetric measurement system (ARAMIS) could capture real-time surface strains. This paper presents findings on strain evolutions at different points along and at $45^{\circ}$ to fibre directions of circular FML blank, through various stages of forming. It was found initiation and rate of deformation varied with distance from the pole, that the mode of deformations range from biaxial stretching at the pole to drawing towards flange region, at decreasing magnitudes away from the pole in general. More uniform strain distribution was observed for the FML compared to that of plain steel and the most significant effects of BHF were its influence on forming depth and level of strain reached before failure.

• 호스피스학술지
• /
• 제7권1호
• /
• pp.29-45
• /
• 2007

People in the end of life and their families suffer in their physical disease and other aspects as a whole person. They need hospice care to palliate their total suffering in physical, emotional, social and also spiritual aspect through professional hospice team. To care their whole personal needs, hospice team must be a multi-discipline team which consists of medical doctors, nurses, social workers, pastors and volunteers. Recently those who die in hospice palliative care unit have trend to increase more than in home year by year. So it is necessary to develop the nursing intervention program to be performed by multi-discipline team approach for in-patient of hospice palliative care unit. The purposes of this study were to develop of wholistic hospice nursing intervention program for inpatient of hospice palliative care unit. The subjects of study were collected from 30 patients those who were over 18 years old and admitted in hospice palliative care unit of S hospital in P city with agreement in hospice palliative care in their terminal disease. The period of data collection was from December 15, 2003 to March 15, 2004. The result were as follows : 1. The result of Wholistic Hospice Nursing Program's development was as follow : A Wholistic Hospice Nursing Program was developed by me in this study is one of the service program for hospice palliative care unit. It was named as ‘Rainbow Program’ to be approached easily by hospice patients. The purposes of it are to improve the quality of life of the terminal patients with their dignity, to help them live in abundant and meaningful in their lives, to care them in peaceful in dying process with understanding them in whole personal, and also to palliate the grief and suffering of the bereaved. It was provided by hospice professionals(nurses, medical doctors, social worker, pastors, art therapists) and volunteers those who were educated in hospice for multi-diciplinary team approach to collaborate with each role play I 20-30 minuters of each through visiting their rooms individually and a place of hospice palliative care unit of S hospital in P city. The subjects of it were the terminal patients those who admitted hospice palliative care unit and their familes. with agreement in hospice palliative care in their terminal disease. The characteristics of it were multi-disciplinary team approach, whole personal care, individual care and total care according to their needs in their condition. The contents of it were pain control, symptom control, counseling patient, counseling family, hair cutting, hair shampooing, bed bath, recreation, taking a walk, event of culture(screen, recital, festival of praises, exhibition and so on), pastoral counseling, ritual service in bed, praying, service in bed, sing a worship praise, listening to the music, sharing remembrance of life, individual visiting music service(sing and praying), meditation Bible, art therapies(dance and drawing), social worker's counselling, confessing and sharing love and thanksgiving. The experimental group subjects participated in Wholistic Hospice Nursing Program which takes 120 minutes per session, total 10 sessions(total 1,200 minutes) altogether. In conclusion, this Wholistic Hospice Nursing Intervention can be used actively for whole personal well-being of the patients in hospice palliative in hospice palliative care unit and also applied in hospice practice as an useful model of multi-disciplinary team approach by hospice professionals.