• International Journal of Precision Engineering and Manufacturing
• /
• 제6권4호
• /
• pp.31-36
• /
• 2005

This paper describes a research work on the die design for the deep drawing & ironing(D. D. I) of high pressure gas cylinder. D. D. I die set is large-sized die used in horizontal press, which is usually composed of a drawing, and an ironing die. Design method of D. D. I die set is very different from that of conventional cold forging die set. Outer diameter of the die set is fixed because of press specification and that of the insert should be as small as possible for saving material cost. In this study, D. D. I die set has been designed to consider those characteristics, and the feasibility of the designed die has been verified by FE-analysis. In addition, the automated system of die design has been developed in AutoCAD R14 by formulating the applied methods to the regular rules.

• 대한기계학회논문집A
• /
• 제30권11호
• /
• pp.1425-1432
• /
• 2006

Coating layers on a coated sheet steel frequently affect distributions of strain rate of sheets and deteriorate the frictional characteristics between sheets and tools in sheet metal forming. Thus, it is important to identify the deformation behavior of these coatings to ensure the success of the sheet forming operation. In this study, the technique using nano-indentation test, FE-simulation and Artificial Neural Network(ANN) were proposed to determine the power law stress-strain behavior of coating layer and the power law behavior of extracted coating layers was examined using FE-simulation of drawing and nano-indentation process. Also, deep drawing test was performed to estimate the formability and frictional characteristic of coated sheet, which was calculated using the linear relationship between drawing force and blank holding force obtained from the deep drawing test. FE-simulations of the drawing process were respectively carried out for single-behavior FE-model having one stress-strain behavior and for layer-behavior FE-model which consist of coating and substrate separately. The results of simulations showed that layer-behavior model can predict drawing forces with more accuracy in comparison with single-behavior model. Also, mean friction coefficients used in FE-simulation signify the value that can occur maximum drawing force in a drawing test.

• 한국콘텐츠학회논문지
• /
• 제22권9호
• /
• pp.497-509
• /
• 2022

선(lines)은 인류 역사에서 가장 오래된 시각적 요소이자 인간의 삶과 밀접하게 연관됐으며, 동굴벽화나 바위에 선으로 그려진 그림 및 기호는 인간의 생존을 위한 대체 이미지로 존재해 왔다. 미술에서 선은 단시간 내에 대상의 핵심을 드러내며, 미술치료에서는 내담자의 심리적 상태를 진단하고 치료적으로 개입할 수 있는 매개체가 된다. 그러나 선 그리기, 즉 선화(line drawing)는 진단뿐 아니라 과정상에서 치료적 중요성을 지님에도 불구하고 그 효용성과 치료적 특성을 고찰한 연구는 활발히 이루어지지 못했다. 따라서 본 연구에서는 미술치료에서 선화와 연관된 국내외 문헌을 이론 삼각검증, 질적 내용분석, 공통부분 찾아내기를 통해 우선 도출한다. 그 결과 선화의 핵심적인 치료적 요소인 운동성을 뇌 구조와 연결하여 살펴본다. 이를 통해 선화의 운동성이 신체, 뇌, 마음에 미치는 치료적 메커니즘을 고찰하고 미술치료 안에서 어떻게 치료적으로 활용 가능한가를 검토 및 제안하는 데 학문적 의의를 둔다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2009년도 특별논문집
• /
• pp.40-46
• /
• 2009

The GSCAD (Global Shipbuilding CAD) System used in Samsung Heavy Industries is based on the Relation and Rule. The design area where excellence of these Relation & Rule can be used fully is pipe support modeling. That's because, many rules are required to place a pipe support and it's supported by hull structural object. Samsung Heavy Industries has been customizing the Relation and Rule supported by SmarMarine3d(R) to model pipe support easily and satisfies standard. Also, the pipe support fabrication drawing program was developed to generate a drawing for the pipe support customized. This paper reviews the characteristics of pipe support modeling on GSCAD and the Rules customized also, fabrication drawing program will be introduced.

• 한국기계가공학회지
• /
• 제9권6호
• /
• pp.101-108
• /
• 2010

The drum clutch investigated in this study is formed in 5 forming steps, which are 1st deep drawing, 2nd deep drawing, restriking, embossing, and $Grob^{TM}$ processes. Dimensional accuracy of the final products greatly depends upon how much more accurate pre-form is manufactured in the previous forming processes before the $Grob^{TM}$ process. The deep drawing, restriking and embossing processes in which the pre-form is formed are very important and decisive steps. Thus in some cases, excessive strain by these operations causes dimensional inaccuracy and cracks initiated from the base and wall of the product. Process variables such as the punch shapes both of 1st and 2nd deep drawing, and punch angle were selected to evaluate the deformation characteristics. The optimum parameters were determined from forming simulations using commercial FEM codes, DEFORM and Tauchi method, specifically developed for metal forming simulation. Finally, experiments for the whole drum clutch forming processes were carried out to verify the optimized forming parameters and the analytical results.

• Design & Manufacturing
• /
• 제14권3호
• /
• pp.37-43
• /
• 2020

Progressive drawing processing is one of the manufacturing processes used to mass-produce a variety of products on the industrial site. In this study, the goal is to achieve a uniform product thickness of at least 1.3mm by reducing the wall thickness of the coupler parts used in automotive air conditioning systems to within 15% using A5052-H32 materials. The progressive die was designed using Blank's law of volume invariance. Due to the characteristics of the drawing process, the material thickness in the punch R part decreases and the thickness in the die R part increases. When designing the progressive die of the coupler part, an ironing method, a push back method, and a stand-alone die pad method were applied to each process to design a mold in consideration of the drawing rate and to artificially adjust the thickness change. The suitability of the method used in die design was investigated by measuring the thickness change of forming parts for each process. In the final part, it was confirmed that the thickness measurement values of the five regions of a radial line were implemented as 1.34-1.36 mm.

• 한국통신학회논문지
• /
• 제13권1호
• /
• pp.41-53
• /
• 1988

선도형은 디지털 영상의 형상과 특성을 표현하기에 가장 적합한 정보이므로 인식과 데이터 전송에 많이 사용되고 있다. 선도형의 부호화로는 8방향 체인코드가 가장 많이 사용되나. 보고에서는 선도형을 효율적으로 부호화하여 기존의 8방향 체인코드에 비해서 약 20% 정도의 데이터 압축 효과를 낼 수 있고 정확도를 요구하는 선도형의 부호화형식으로 사용될 수 있는 모드설정 체인부호화법을 새로이 제시하고 이것의 응용으로 선도형의 특징점이 될 수 있는 에지결정법을 제시한다. 이 부호화는 한 점의 8근방에 대하여 각 상한마다 기준모드를 설정하고, 이 기준모드에 3개의 방향코드를 할당하여 3비트로 하나의 선화소가 부호화되도록 한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.91-97
• /
• 2004

The drawbead is one of the most important factors in sheet metal forming for automotive parts. So clarifying the friction characteristics between sheets and drawbead is essential to improve the formability of sheet metal. Therefore in this study, drawbead friction test was performed at various bead materials(FC300, HC891, FCD550, HD700, HK600, HK700, SKD11) and surface treatment of beads(Base, induction hardening, Cr plating, ion nitriding, Toyoda diffusion process, TiCN, TiN, CrN). Circular shape bead has been used for the test. The results show that friction and drawing characteristics were mainly influenced by surface treatment.

• 복식
• /
• 제63권5호
• /
• pp.72-86
• /
• 2013

This research aims to analyze the expressive characteristics of the fashion illustration in various fashion products such as clothing, accessories, other fashion products, and magazine advertisements. Targeting 223 items of products that had adjoined fashion illustration from 2000 to 2008, which had been collected through from magazines and web sites using the fashion illustration expression categorization (expression technique drawing style, body expression, expression image, attaching method to product) based on the theoretical background and the general trends by products. In frequency analysis results, painting technique and graphic technique were of great importance in the expression technique, and shading drawing and contour drawing were of great importance over all product groups for the drawing style. In body expression, exaggerative expression was the highest; simple expression and realistic expression were of great importance over all product groups relatively. In particular, there was a very distinct difference by fashion products in expression image. Humor image has the most importance in fashion clothing and fashion accessories. Casual image is the most important in magazine advertisements, and feminine image is the most important for other fashion products. Lastly, in attaching method to products, finished goods printings made up the largest proportion over all products. In fashion clothing, textile printings was the highest in proportions. Stitch in fashion accessory, the original form of commodity in other fashion products. This study will become a very valuable source in fashion products development using fashion illustrations.

• 한국산학기술학회논문지
• /
• 제16권2호
• /
• pp.1381-1387
• /
• 2015

본 논문은 음악적 형태 생성을 위한 스케치 드로잉 시스템, 엠쉐이퍼 (이하 m-shaper)를 제안한다. 간단한 스케치 드로잉을 통해 사용자들은 컴퓨터로 바로 연주가 가능한 음악적 형태를 구성할 수 있다. m-shaper는 드로잉 특징을 규정하는 변수를 획득하고 이를 이용하여 음표와 형태를 제작한다. 타블렛을 이용하여 4가지 스케치 움직임 정보, 압력, 회전각도, 기울기 각도, 속도 정보를 감지한다. 형태를 구성하는 각각의 점은 악기 종류, 음길이, 음높낮이, 옥타브를 표현하는 특정음표에 매핑된다. 현재 m-shaper 시스템은 디자인 초기단계를 지원하는 컴퓨터 연산도구로 개발되었다. 디자이너는 음악적 영감을 받으며 기하학적인 스케치를 그리고 개념 형태를 탐색할 수 있다. 디자이너들은 관련 제어값을 조절하면서 결과물을 조절하고 스케치 드로잉을 변형할 수 있다.