• Management & Information Systems Review
• /
• v.7
• /
• pp.265-292
• /
• 2001

This paper examines what determines the use of contingent workers in Korean Department Stores. Drawing on internal labor market, transaction cost & agency, and bureaucracy theories, I hypothesize that four factors affect the use of contingent workers: job characteristics, HRM, occupation, and organizational characteristics. Data from a sample of employers surveyed by the author in 1997 were used to test the hypotheses, and analyses showed the following results. First, consistent with job-based perspective, we find that such job characteristics as firm-specific skill and the level of skill significantly affect the use of contingent workers. But job standardization and outcome measurability have no effects of its use. Second, also we find significant effects on the use of contingent workers of such HRM as scrutiny on employee selection and promotion system. The promotion system has expected effect on its use, but scrutiny on employee selection has opposite effect. Third, we find that occupation significantly affects the use of contingent workers, especially the extent of use of contingent workers of sales service is as five hundred times as that of managerial occupation. Fourth, also consistent with organizational-based perspective, we find that the firm's size significantly has positive effects, and affiliate company and labor union have negative effects. That is, the larger firm's size is, the more possibility of use of contingent workers exists, and the possibilities of its use reduce in case of affiliate company and in front of labor union. Finally, we discuss the implications and limits of theses findings.

• Korean Journal of Acupuncture
• /
• v.35 no.2
• /
• pp.47-55
• /
• 2018

Objectives: Clinical improvements can be observed following placebo administrations in clinical trials. Randomized controlled trials have been conducted to disentangle the specific effects of therapeutic interventions over the past decade. In acupuncture trials, non-penetrating placebo needles offer the opportunity to determine the specific effects of needling. Methods: The present review provides an overview of the concept of the placebo effect and the characteristics of the placebo needles. Results: Placebo control can contribute to minimize for bias and the contextual and psychological components of therapeutic interventions. Placebo control should meet two criteria: blinding efficacy (indistinguishable from active treatment) and physiological inertness. In the case of acupuncture, however, it is difficult to meet both criteria simultaneously. The dilemma of placebo needles suggests that placebo needles do not constitute proper control in acupuncture research. Considering the characteristics of placebo needles, patients are more likely to perceive placebo needles as active treatment in acupuncture trials compared to placebo pills in pharmaceutical trials. Placebo response might be observed more frequently to placebo needles than to placebo pills. When acupuncture treatments are utilized in clinical use, placebo effects can be enhanced by exploiting patients' expectations in the contextual or environmental cues that surround medical intervention. Conclusions: We have to consider these unique characteristics of placebo needles in order to avoid drawing premature conclusions that acupuncture itself is just a placebo.

• The Research Journal of the Costume Culture
• /
• v.29 no.3
• /
• pp.406-421
• /
• 2021

During the COVID-19 pandemic, the obligatory wearing of masks has led to increased consumer demand and the diversification of mask design. Accordingly, it is necessary to understand the inner meaning and characteristics of masks in the pandemic situation. Therefore, the purpose of this research is to analyze the characteristics of fashionable masks and their new cultural meaning under the COVID-19 pandemic. This research is based on literature review and empirical research. Drawing on an investigation of the historical evolution of masks and their transition under the pandemic (exhibiting differences in mask culture among countries and regions), this study analyzed 54 distinctive fashion masks designed by fashion brands and influencers that appeared from January 2020 to January 2021. The characteristics of fashion masks identified under the influence of the pandemic are as follows: Message delivery on political issues and human rights; psychological defense and expression of individuality; and conspicuous display via luxurious materials and luxury brand logos; moreover, the design of the mask uses the same material, color, pattern, decoration, and other methods as clothing to achieve the overall style. Over the course of the pandemic (and even in post-pandemic lifestyle), fashion masks are becoming more diversified conveying new social and cultural meanings.

• Cartoon and Animation Studies
• /
• s.15
• /
• pp.151-164
• /
• 2009

The discussion on folk painting (minwha) has been continued till recent in various ways. MinWha is applied by painting artists and also utilized as a basic material of design. These are the attempts approved by the viewpoint of the 'Korean beauty'. In saying so, minwha symbolizes for typical types of Korean painting, and is articulated as an aspect of forgotten spirit. However, despite the fact of Minwha's frequent application, and its evident originality, it remains only the thread of the existence. Although minwha has a lot of commonalities and similarities with the characteristics of cartooning, a decisive attempt of cartooning is hardly shown through. Therefore, this paper is aim to classify creative paintings by the distinctive features of minwha, such as exaggeration and abridgment, sarcasm and current affair aspect, common technique of art drawing, caricatured element, expression of an ideal world, various techniques from artist's different comprehension, etcetera and to make opportunity to constructively apply these features in cartoons. The types of minwha are mostly classified by the contents of the painting. However, since the purpose of this thesis is to find caricatured aspects in minwha, it will be largely classified by the elements of animal, plant, human, insect species, finny tribe, feathered tribe, and nature phenomenon. This classification takes advantage of accessibility to understand the characterization of the object, and leads to take a positive approach.

• Journal of the Korea Convergence Society
• /
• v.8 no.12
• /
• pp.275-281
• /
• 2017

The automobile cowl cross bar which is a backbone frame part inside the cockpit module has been designed with more complex geometries recently due to demands of its enhanced functions and reduced weight of car. The traditional manufacturing process using welding between tubes with different diameters shows several problems such as poor mechanical characteristics and appearance, etc. Therefore, in this study, manufacturing processes which can eliminate the welding process were developed by applying one-piece metal forming processes such as tube drawing and radial swaging. As results, it was found that the one-piece manufacturing processes give better bending strength than the traditional welding process and the swaging process shows the lowest manufacturing cost.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.5
• /
• pp.197-202
• /
• 2001

The influence of thermal treatment and cold drawing was investigated for poly(ethy1ene terephthalate) films fabricated with various experimental conditions. Samples were elongated at room temperature under stepwise-drawing condition with the cross-head speed kom 0.5 to 500 mrdmin in an universal tester. Stress oscillation was observed in the stress-stnin curve of the samples heat-treatd at 50, 72 and $129^{\circ}C$ for 30 min, but it was not observed in the samples heat-treatd at $83^{\circ}C$ for 30 min. Thermal analyses of the samples were carried out in differential scanning calorimeter at the heating rate df $10^{\circ}C$/min/min, and the glass transition temperature, crystallization peak, enthalpy of fusion and degree of crystallinity were measured. The dynamic mechanical analyses of the samples were also carried out in a multiplefimction internal kiction pendulum at 1 Hz with the heating rate of $1.5^{\circ}C$/min, and it was found that the elastic modulus increases in the order of non-treated, heat-treated, and elongated samples.

• Journal of KIISE:Software and Applications
• /
• v.30 no.3_4
• /
• pp.293-307
• /
• 2003

Object-oriented development has been generalized, but object-oriented project planning and scheduling techniques have not been studied enough. Furthermore, it is difficult to apply the conventional software management techniques to object-oriented projects. Especially, the large scaled projects are increasing, but the project planing techniques for these large scaled projects have not been proposed enough. In this paper, we propose systematic techniques for OO based project scheduling. We suggest a 7 step-process for deriving the OO project schedule from the use-case diagram which is describing the functional requirements of the system. The proposed process includes identifying use-cases, drawing preliminary chart through interdependency analysis, identifying characteristics of each use case, determining the number of iteration, assigning use-cases to iteration, considering available resource and constraints, drawing revised PERT chart. Each step has the explanation of the input, output, and the guidelines needed to perform the step. The project scheduling technique proposed in this paper ran be used effectively in the planning phase which the purpose is to plan a development schedule to yield the high quality software in minimum time.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.95-95
• /
• 2010

자동차 산업에서 차체를 성형하는 프레스 금형 산업은 꾸준히 증가하고 있는 자동차 생산대수와 함께 성장해가고 있으며, 자동차 산업의 국제 경쟁이 심해지고 소비자들의 요구가 다양해짐에 따라 신제품 개발주기에 발맞추어 금형의 제작에도 단납기 및 비용절감을 위한 노력과 제품의 품질 향상을 위해 신기술, 신공법이 적용되고 있다. 한편 자동차 차체를 제작하는 프레스 금형가공은 박판소재를 원하는 형상으로 제작하는 공정으로써, 프레스의 상 하 운동을 이용하여 강판을 성형한다. 이러한 금형의 형태는 곧 자동차 차체 제품의 형태를 완성하므로 제품을 성형하는 도중에 금형과 소재의 마찰에 의해 금형의 마모나 마멸이 발생하여 제품의 품질을 저하시킬 우려가 있다. 따라서 금형의 내마모성 및 수명을 향상시키기 위한 방안들 중 표면경화처리가 행해지고 있으며, 그중 공정 속도가 빠르고 국부적인 열처리가 가능한 레이저 표면처리 방법이 많은 관심을 받고 있다. 본 연구에서는 이러한 금형의 성질을 향상시키기 위해 고출력 다이오드 레이저를 이용하여 프레스 금형공정 중 드로잉(drawing) 공정에의 적용을 위한 표면경화처리를 실시하였다. 최대출력 4.0kW의 다이오드 레이저를 사용하였으며, 6축 외팔보 로봇에 열처리용 광학계를 장착하여 열처리를 실시하였다. 또한 광학계 부근에는 적외선 온도센서가 부착되어있어 열처리시 시험편의 표면온도를 실시간으로 측정할 수 있도록 구성되어져있다. 시험편은 금형재료용 구상흑연 주철인 FCD550 소재를 사용하였으며, 공정변수에 따른 열처리 특성을 파악하고, 그 경화특성을 평가하였다. 실험 결과, FCD550 소재의 표면 열처리시 레이저 출력 3.5kW, 빔 이송속도 3mm/sec에서 최적의 열처리 특성을 나타내었으며, 이때의 최고 경도는 930Hv을 나타내며 모재에 비해 경도가 3배 정도 상승하는 우수한 경화특성을 보였다.

• Physical Therapy Korea
• /
• v.25 no.4
• /
• pp.27-36
• /
• 2018

Background: We developed a novel integrative lumbar stabilization technique that combines lumbar extension (LE) exercise with abdominal drawing-in maneuver (ADIM) to ameliorate low back pain (LBP) associated with neuromuscular imbalance and instability, based on the collective evidence of contemporary spinal rehabilitation. Objects: The specific aim of the present study was to investigate the effects of LE exercise with and without ADIM on core muscle strength, lumbar spinal instability, and pain, as well as functional characteristics in individuals with LBP using advanced radiographic imaging techniques. Methods: patients with mechanical LBP (N = 40, 6 males; $35.1{\pm}7.6years$) were recruited and randomly assigned either to the combined LE and ADIM (experimental group) or the LE alone (control group). Outcome measures included the visual analog scale, the modified Oswestry Disability Index, muscle strength imbalance (MSI), and radiographic imaging. The lumbar intervertebral displacement (LID), intervertebral (IV) and total lumbar extension (TLE) angles were calculated to evaluate the lumbar segmental instability. Results: The experimental group showed significant differences in the L3-L4, L5-S1 LIDs, L4-L5 and L5-S1 IV angles, and TLE angle as compared to the controls (p<.05). Immediate pain reduction and muscle strength imbalance ratio were significantly different between the groups (p<.05). Conclusion: These results suggest that the addition of ADIM significantly increased lumbar spinal stabilization in individuals with LBP, thereby reducing pain associated with functional lumbar flexion during daily activities.

• Journal of the Korean Society of Earth Science Education
• /
• v.2 no.1
• /
• pp.80-90
• /
• 2009

The purpose of this study is to investigate the characteristics of the mind maps which were drawn with pencil or color pens by elementary students. For this study, 31 students of the 6th grade were selected and trained mind mapping. After training, the subjects had drawn mind maps with color pens about the ROCK for 15minutes and drew mind maps with pencil after 2days of mind mapping using color pens. In addition to activities of mind mapping, the students handed in their papers which were written one's impression of drawing two kinds of mind mapping. The results were follows: First, in central circle which was linked words connected firstly with ROCK as key word, the difference of 2kinds mind maps were little showed in the quantity and quality of the words, branches and their adequacy. Second, the mind maps using pencils had more words, branches and images than mind maps of using color pens in the whole assessment. Third, the most students suggested that the mind mapping using pencil were advantage to economy of time, retouching words and branches, also the mind mapping using pencil made the students relax the strain for drawing it because of retouching possibility. Consequently, the results of this study suggest the mind mapping using pencil has advantage effect on the purpose of gaining students' thinking abundantly and economy of time in elementary science classes.