• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.55-58
• /
• 2002

Parallel finite element code has been recently developed for the analysis of the incompressible Wavier-Stokes equations using domain decomposition method. Metis and MPI libraries are used for the domain partitioning of an unstructured mesh and the data communication between sub-domains, respectively. For unsteady computation of the incompressible Navier-Stokes equations, 4-step splitting method is combined with P1P1 finite element formulation. Smagorinsky and dynamic model are implemented for the simulation of turbulent flows. For the validation performance-estimation of the developed parallel code, three-dimensional Laplace equation has been solved. It has been found that the speed-up of 40 has been obtained from the present parallel code fir the bench mark problem. Lastly, the turbulent flows around the MIRA model and Tiburon model have been solved using 32 processors on IBM SMP cluster and unstructured mesh. The computed drag coefficient agrees better with the existing experiment as the mesh resolution of the region increases, where the variation of pressure is severe.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1383-1388
• /
• 2010

The latest generation of tram is low-floor design, various nations in europe and japan have developed battery driven hybrid trams that combine battery and wiring. Battery driven tram system is achieved by contactless power supply system, thus system is needed high efficiency, high power and low weight traction motor for maximization of energy efficiency. Research from abroad is still in induction motor(IM) application, and it is not meet the efficiency and the power per unit volume in IPMSM. In this paper, we design compare IM and IPMSM to apply battery driven tram, and then compare these motors. To design the motor, we estimate the loading condition at first. Loading condition includes rolling resistance, air-drag resistance, and slope resistance. Based on the loading condition by estimation, we determine the power and compute rated voltage and rated current. In this paper, voltage is limited by battery voltage level. As a result, volume about IM is 1.98 times bigger than IPMSM under same condition. Even though IPMSM is bigger than IM in power density per volume, we consider more factors for actual application because there are demagnetization of permanent magnet in IPMSM and so on by external environment conditions.

• 한국해양공학회지
• /
• 제19권2호
• /
• pp.12-18
• /
• 2005

Typhoon Maemi landed on the southeast coast of Korea and caused a severe storm surge in Jinhae Bay and Masan Bay. The tide gage in Masan Port recorded the storm surge of a maximum of more than 2m and the area of more than 700m from the Seo Hang Wharf was flooded by the storm surge. They had not met such an extremely severe storm surge since the opening of the port. Then storm surge was hindcasted with a numerical model. The typhoon pressure was approximated by Myers' empirical model and super gradient wind around the typhoon eye wall was considered in the wind estimation. The land topography surrounding Jinhae Bay and Masan Bay is so complex that the computed wind field was modified with the 3D-MASCON model. The motion of seawater due to the atmospheric forces was simulated using a one-layer model based on non-linear long wave approximation. The Janssen's wave age dependent drag coefficient on the sea surface was calculated in the wave prediction model WAM cycle 4 and the coefficient was inputted to the storm surge model. The result shows that the storm surge hindcasted by the numerical model was in good agreement with the observed one.

• Journal of Astronomy and Space Sciences
• /
• 제32권3호
• /
• pp.189-200
• /
• 2015

In this study, we present the results of orbit determination (OD) using satellite laser ranging (SLR) data for the Science and Technology Satellite (STSAT)-2C by a short-arc analysis. For SLR data processing, the NASA/GSFC GEODYN II software with one year (2013/04 - 2014/04) of normal point observations is used. As there is only an extremely small quantity of SLR observations of STSAT-2C and they are sparsely distribution, the selection of the arc length and the estimation intervals for the atmospheric drag coefficients and the empirical acceleration parameters was made on an arc-to-arc basis. For orbit quality assessment, the post-fit residuals of each short-arc and orbit overlaps of arcs are investigated. The OD results show that the weighted root mean square post-fit residuals of short-arcs are less than 1 cm, and the average 1-day orbit overlaps are superior to 50/600/900 m for the radial/cross-track/along-track components. These results demonstrate that OD for STSAT-2C was successfully achieved with cm-level range precision. However its orbit quality did not reach the same level due to the availability of few and sparse measurement conditions. From a mission analysis viewpoint, obtaining the results of OD for STSAT-2C is significant for generating enhanced orbit predictions for more frequent tracking.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2018년도 추계학술대회
• /
• pp.4-6
• /
• 2018

Traditional methods of research on ship maneuvering performance were estimated in calm water. Ship maneuverability in waves is of vital importance for navigation safety of a ship (ITTC, 2008). The accurate estimation of force and moment acting on the ship and rudder behind propeller are necessary because the rudder, propeller and hull interaction is of key importance. In addition, course-keeping ability and maneuvering performance of a ship can be significantly affected by the presence of wave. In this study, the model test is performed in the regular wave in the square wave tank in Changwon National University and the hydrodynamic force acting on the ship hull and rudder behind the propeller in various wave directions is investigated. The effect of wavelength and wave direction on hydrodynamic force acting on ship and rudder behind propeller in regular waves is discussed.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 Asia Navigation Conference
• /
• pp.87-94
• /
• 2006

In this study we carried out to analyze the effect of wind load on the structural stability of a container crane according to the change of the boom shape using wind tunnel test and provided a container crane designer with data which can be used in a wind resistance design of a container crane assuming that a wind load at 75m/s wind velocity is applied on a container crane. Data acquisition conditions for this experiment were established in accordance with the similarity. The scale of a container crane dimension, wind velocity and time were chosen as 1/200, 1/13.3 and 1/15. And this experiment was implemented in an Eiffel type atmospheric boundary-layer wind tunnel with $11.52m^2$ cross-section area. Each directional drag and overturning moment coefficients were investigated and uplift forces at each supporting point due to the wind load were analyzed.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권2호
• /
• pp.41-46
• /
• 2015

The drag of the excess charge in an electrical double layer at the solid fluid interface due to water flow induces the streaming current, i.e., the streaming potential (SP). Here we introduce a sandbox experiment to study this hydroelectric coupling in case of a tracer test. An acrylic tank was filled up with homogeneous sand as a sand aquifer, and the upstream and downstream reservoirs were connected to the sand aquifer to control the hydraulic gradient. Under a steady-state water flow condition, a tracer test was performed in the sandbox with the help of peristaltic pump, and tracer samples were collected from the same interval of five screened wells in the sandbox. During the tracer test, SP signals resulting from the distribution of 20 nonpolarizable electrodes were measured at the top of the tank by a multichannel meter. The results showed that there were changes in the observed SP after injection of tracer, which indicated that the SP was likely to be related to the solute transport.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.810-818
• /
• 2020

A moored floating structure may exhibit resonant motion responses to low-frequency excitations. Similar to the resonant responses of many vibration systems, the motion amplitude of a moored floating structure is significantly affected by the damping of the entire system. In such cases, the damping contributed by the mooring lines sometimes accounts for as much as 80% of the total damping. While the damping induced by catenary mooring lines is well-investigated, few studies have been conducted on the damping induced by taut mooring lines, especially one partly embedded in soil. The present study develops a simple but accurate model for estimating the damping contributed by mooring lines. A typical type of taut mooring line was used as the reference and the hydrodynamic drag force and soil resistance were taken into consideration. The proposed model was validated by comparing its predictions with those of a previously developed model and experimental measurements obtained by a physical model. Case studies and sensitivity studies were also conducted using the validated model. The damping induced by the soil resistance was found to be considerably smaller than the hydrodynamic damping. The superposition of the wave frequency motion on the low-frequency motion was also observed to significantly amplify the damping induced by the mooring lines.

• 우주기술과 응용
• /
• 제1권1호
• /
• pp.23-32
• /
• 2021

1톤 이상의 인공우주물체 중 통제가 불가능한 인공우주물체의 추락은 지상에서의 인명 및 자산 피해가 발생할 가능성이 높기 때문에 국가적으로도 '인공우주물체 추락·충돌 대응 매뉴얼'에 따라 우주물체 추락 상황에 대한 위기를 관리한다. 따라서 인공우주물체 추락 상황 및 위험도를 판단하기 위한 신속하고 정확한 인공우주물체 추락 예측 정보를 제공하는 것이 매우 중요하다. 인공우주물체 추락 예측 방법은 국내외 여러 기관들에서 수행하고 있으나, 국가적으로 신뢰할 수 있는 국내 독자적인 툴의 확보는 국가 우주위험 재난 위기 상황에서 매우 필수적이다. 본 연구에서는 인공우주물체의 추락 상황에서 관측으로부터 생성된 우주물체의 접촉궤도요소 또는 해외에서 공개되는 평균궤도요소를 활용하여 인공우주물체의 추락 예상 시각 및 지점을 정밀하게 예측할 수 있는 소프트웨어를 개발하였다. 개발된 소프트웨어는 그레이스 1호(Grace-1) 위성과 그레이스 2호(Grace-2), 톈궁 1호(Tiangong 1) 위성과 창정 5B호 로켓 잔해(CZ-5B)와 같은 실제 통제 불가능한 인공우주물체의 추락 상황에서 독자적인 우주물체 추락 예측 정보를 제공하여 검증하였다.

• 한국시뮬레이션학회논문지
• /
• 제29권1호
• /
• pp.1-9
• /
• 2020

과학기술의 발전에 따라 탄도탄에 대한 위협이 나날이 증대되고 있으며, 이러한 위협에 대처하기 위한 탄도탄 요격미사일에 대한 개발이 요구되고 있다. 대탄도탄용 요격미사일의 개발을 위해서는 요격시험이 필수적이다. 시험을 통해 얻은 계측자료를 활용하여 요격미사일을 포함한 전체적인 요격 시스템의 성능을 확인할 수 있다. 그러나 요격시험 시에는 요격에 의한 파편이 발생되기 때문에 안전을 위한 민간인의 접근 통제가 필요하다. 따라서 요격시험에 앞서 요격 파편에 대한 안전구역의 신뢰도 높은 추정이 선행되어야 한다. 본 논문에서는 모델링 분석 및 시뮬레이션을 활용하여 요격 파편에 대한 안전구역을 산출하였다. 우선, 탄도탄과 요격미사일의 발사단계에서 요격까지의 전 과정에 대한 시뮬레이션을 수행하였고, 요격 시점에서의 상대 속도 및 상대 각도를 산출하였다. 이 결과를 활용하여 요격 시의 에너지를 계산하고 요격 파편의 방출속도를 산출하였다. 이후, 파편에 작용하는 항력과 중력을 고려하여 낙하 궤적을 산출하였고, 파편의 낙하 지점과 위험도를 종합적으로 고려하여 최종 안전구역을 산출하였다.