• 한국의류학회지
• /
• 제27권8호
• /
• pp.946-957
• /
• 2003

This study aimed to suggest a simple and well-fitting flat pattern drafting method for a men's jacket. Four jackets in thick muslin were made from four different drafting methods utilizing a few measures as breast girth, center back length, and chest width, which were not much different from the drafting methods of woman's jacket. The appearance of the 4 jackets was evaluated by a pool of evaluators consisted of graduate students who had much clothing construction teaching experiences and their motion adaptability was evaluated by two wearers who belonged within the range of the average measures of the Korean male figure as reported from the 1997's Census for Standard Body Measure. A drafting method evaluated as the most well-fitting and well-functioning in general was chosen and modified to enhance the appearance and was reevaluated to confirm its fit improvement. As a result of this study, a new drafting method, simple and not much different from that of a woman's jacket pattern drafting method is proposed. Since this method is based on the minimal measures and ratios thereof, and is not as complicated as ordinary drafting methods for men's wear, the researcher expects that this drafting method allows more chances for the students to learn and understand men's wear more easily and comfortably.

• 한국의류산업학회지
• /
• 제15권2호
• /
• pp.256-267
• /
• 2013

This study is conducted to improve the fitness of Air Force winter service uniforms pants through the development of a pants pattern drafting method and automatic pattern drafting program for mass customization. The initial study pattern drafting method is formed through an analyses of 4 kinds of conventional pants pattern drafting methods for education and 3 kinds of conventional pants patterns of Air Force apparels. The initial study pattern drafting method is converted into the final study pattern drafting method after twice conducting a wearing test. To verify the final study pants pattern, a motion adaptability evaluation, an ease amount evaluation and an appearance evaluation are conducted. The results of the final study patterns were better than conventional winter service uniforms in the motion adaptability evaluation and the appearance evaluation. However, the results show similar values between the final study patterns and conventional winter service uniform patterns in the ease amount evaluation. An automatic pattern drafting program was developed based on the final study pattern drafting method. The program allowed the achievement of customized pants patterns through the placement of customer body sizes into the size input window. It also provided two kinds of ease amount and two kinds of waist belt level options.

• 한국의류학회지
• /
• 제35권11호
• /
• pp.1271-1284
• /
• 2011

This study improves the fitness of Air Force winter service uniforms through the development of a shirt pattern drafting method and automatic pattern drafting program for MTM production. A calculation formula is formed through a correlation analysis and regression analysis using Size Korea 2004 3D measurement data after analyzing 4 kinds of existing shirt pattern drafting methods and 3 types of shirt patterns currently used for the Air Force service uniform. The results of this study are as follows: The developed pattern drafting method has 4 parts that use calculated dimensions: neck base width, front interscye, back interscye and scye depth. Other body measuring parts that have a high correlation with calculation parts are inserted into regression analysis as independent variables to create dimension calculation formulas. The result of the final study patterns were better than existing winter service uniforms in nearly all items for the appearance evaluation and motion adaptability evaluations. The method was converted into an automatic pattern drafting program using C++ after the completion of pattern drafting method development.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1987년도 학술발표초록집
• /
• pp.34-34
• /
• 1987

Investigation has been carried out on the physical properties of several cotton rovings in various drafting conditions, such as twist, draft ratio and roller gauge. Drafting force and tensile strength were measured and analyzed by the statistical method like 3 factorial design. The correlations between drafting force and tensile strength were also examined. It was known that all factors effected on the drafting force and tensile strength of rovings. But the linear and quadratic effect of factors were found different results.

• 한국실내디자인학회논문집
• /
• 제18호
• /
• pp.16-22
• /
• 1999

The purpose of this study is to analyze the drafting process by using AutoCAD for the basic course as well as to suggest the educational basic data of CAD in interior desigv. This research is to show not only practical use of CAD as a drafting tool function, but offering optimizing ways of AutoCAD command usage. The method used for this study is based on an analyzing of 6 types of total 98 types AutoCAD tutorial manual in CAD section of Kyobo book center. After the analysis of the AutoCAD command usage in creating floor plan, characteristics of drafting process is nearly the same as traditional drafting process. It means that traditional drafting process grafted on to computer aided drafting process. And the practical usage of AutoCAD command type is Draw, Modify, Format and View command in creating floor plav. That is emphasis on a specific functiov. Therefore, it should be developed basic course program which adapted various function of AutoCAD.

• 대한가정학회지
• /
• 제48권4호
• /
• pp.71-81
• /
• 2010

For a pattern to be a scientific and reasonable drafting method. it should be based on the human body, have fewer measuring items, be easy to learn, and be able to make good-looking clothing that fits many people. Therefore, the height, foot length and circle radius in the Durumagi drafted in this study examined to improved the drafting method for Korean Durumagi. As a result, a pattern drafting method was developed in which Moo, Gutsup, Ansup and length of clothing were naturally derived according to the size of individuals.

• 한국의상디자인학회지
• /
• 제25권4호
• /
• pp.45-57
• /
• 2023

This research compared and analyzed a representative jacket pattern making method to suggest implications for the mass customization process of clothing. Four types of pattern making methods were selected according to the degree of reflection of human body measurements. Patterns were analyzed according to the size of middle-aged women. The results of this study are as follows. First, it identified and compared the difference in human body measurement and drafting processes required for pattern drafting. Next, as a result of analyzing the manuals and institutional figures presented in the pattern drafting manuals, problems such as B.P. location and compartment of the chest circumference, which are not appropriate, were found and the human body measurement method is different for each pattern making method. Through the above analysis, the advantages and disadvantages of the pattern making methods were identified and proposed improvements and implications for the application to the apaarel mass customization process were presented.

• 패션비즈니스
• /
• 제16권3호
• /
• pp.78-94
• /
• 2012

This study devised and drew custom sleeve patterns by using a regression equation with the data from 7 models along with the sleeve that was slightly modified to make the general-purpose sleeve pattern. To devise a general-purpose sleeve pattern, the sleeve pattern was drawn as an object for comparison by applying the Bunka drafting system (sleeve pattern by the Bunka drafting system) to the basic upper garment. Actual sleeves, made by using the three types of patterns above, were created and tested by models. Next, 30 panel members participated in a sight test of the compatibility of the sleeves to examine the validity of the sleeve drafting method acquired using the regression equation. The test proved that the custom sleeve pattern and the general-purpose sleeve pattern were more suitable for the characteristics of arm structures. Thus, the new sleeve-cap part drafting method using the regression equation was shown to have validity. As a result, since a very significant correlation was obtained for the body measurement figures and the basic pattern of the adequate basic pattern of the sleeves, this study concludes that it is possible to come up with primary data that can be widely used by increasing the number of subjects.

• 복식문화연구
• /
• 제27권6호
• /
• pp.599-614
• /
• 2019

The aim of this study to provide basic reference data for the development of video contents used in pattern drafting education and to explore the possibility of utilizing YouTube videos in such education. Subject videos were selected using the number of views. A total of 596 videos and 28 channels were analyzed for the period July to September 2019 and the results are as follows. With regard to content, there were 27 pattern drafting items, the majority being dress, pants, skirt, blouse and sleeve drafting, although high-level content such as cowl, bustier, corset patterns were also available. Therefore, there is a high likelihood that YouTube videos could be used as educational material, especially as supplementary references to provide specific examples and easy explanations for difficult concepts or method, for students majoring in this field. However, as most videos currently focus on a few items, expanding video content to features a wider variety of clothing items at different levels is necessary. With regard to video length, it mostly ranged from 10 to 15 minutes. It is not advisable to create lengthy lecture-style videos expounding on different principles or variations in pattern drafting when developing educational video material.

• 한국가정과교육학회지
• /
• 제5권1호
• /
• pp.45-59
• /
• 1993

The aims of this study are to develop CAI programs for bodice and sleeve pattern drafting for the 3rd grade students in a middle school and to compare the students’achievement degree in using traditional teaching method with that in using CAI programs. On the basis of results above the direction and possibility of using computers in education home economics is another aim. For this study, after the programs are developed, which is on the model of middle school text book, one hundred girl students of 2nd grade of middle school in Songpa Gu, Seoul, who have never given Bodice and Sleep Pattern Drafting lesson are chosen. The students are divided into two groups: one is called comparison group, which is taught by traditional method, the other, experimental group, which is taught by CAI programs. To evalute the learning achivement degree, evaluation test, effectiveness of learning and interest degree test and time test are given. Questionaire investigation about CAI program is given to experimental group. The results of this study are as follows: 1. CAI programs on pattern drafting are developed and can be used in the class. 2. In the tests of achievement degree, of effectiveness, and of interest the experimental group gets higher scores than the comparison group. 3. In the time test about how many students can draft the pattern in a given time, in every step more students in experimental group finished drafting than the comparison group. 4. The students showed interest in CAI programs and played an active part in the using computers. Therefore, using CAI programs in the class of pattern drafting saved the teachers lots of difficulties and enables individual learning improving the effectiveness of learning. I hope the studies of CAI will be established in other field as well as Home Economics, especially clothing part, and computers will be used lively