• 한국측량학회지
• /
• 제21권3호
• /
• pp.209-214
• /
• 2003

지적 분야는 지적도면전산화사업의 일환으로 수치화된 도형정보와 대장정보를 PBLIS에 탑재하여 업무를 수행하고 있고, 이 데이터를 이용해서 현행 측판측량체계를 전자측판측량체계로 전환함으로서 도해지적에서 발생되는 제도오차, 축척오차 및 지적도면의 신축오차 등의 기술적인 오차와 측량을 할 때마다 측량사에 따른 개인오차가 제거됨은 물론 실측도에 대한 정확도를 분석하여 효율적인 측량방법을 제시하는데 그 목적이 있다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 가을 학술발표회 논문집
• /
• pp.297-298
• /
• 2003

Linear density regularity is one of the important characteristics of fiber bundle and yarns, influencing the process performance and the product quality. Analysis on the variation of bundle thickness for various draft ratios and frequencies is therefore of great significance, because an optimum drafting condition can be obtained by establishing the effect of major process factors on the output. (omitted)

• 한국CDE학회논문집
• /
• 제11권6호
• /
• pp.393-402
• /
• 2006

The purpose of this study is to develop mechanisms of nD model-based design by the combination of 2D drawing standards and 3D building models from the current 2D and text-based design. The aim of this study can be archived by defining the 2D model extension definitions for the IFC model development and harmonizing existing 2D standards. The paper examines 1) 3D Representation of Building Element and Building Services element, and 2D Model extension of IFC2X.2, 2) Basic development of additional 2D element that should be added to IFC model, and 3) mapping method between current 2D standard and IFC2.X2. Following this approach, the interoperability problem between 3D model and 2D drawing can be solved and finally an extended data model could be developed.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.333-337
• /
• 1999

The biggest challenge facing today manufacturing industry is better quality and high productivity. From an economic point of view, productivity is the most important parameter, as high productivity will reduce the cost. However, the customers of day are not only cost concerned, but also quality conscious. So high accuracy levels should also be achieved in the manufacturing process. This paper reports the development of a automatic design system based on AutoCAD program. 1'his work is composed of three section that are design of top down menu, impeller and casing for pump programed by AutoLISP language and runned Windows system. The developed system ultimately generates the design for a pump through AutoCAD program. In the design of the pump, it needs about 23 hours with an expert, but this system can be only 80 seconds without an expert.

• 패션비즈니스
• /
• 제12권1호
• /
• pp.109-119
• /
• 2008

The purpose of this study is to dvelop the basic pattern of wome which are fitting for 75A. The collected data were statistcally processed usig the SPSS 10.0 for Mans Standard Deiation, Cronbach's $\alpha$, etc. This study suggested a size chart for body measurement for constructing basic brssiere patterns with size of 75A. The construction of this experimental brassiere were lower cup, upper cup, front panel and wing and characterized by a round cup wired as well as a full cup embrcing the entire breasts. The drafting method for constructing basic brassiere patterns for 75A was completed by selecting a total of 11subjects, and two wearing tests were carried out with the subjects. the dimensions and shapes of the basic brassiere pattern suggested in this research proved to be fitting and to have a wearing effect that brings together and supports the breasts.

• 대한가정학회지
• /
• 제35권4호
• /
• pp.79-94
• /
• 1997

This study was performed to develop a basic stacks pattern for middle-aged women reflecting the characteristics of their lower body types. Anthropometric measurements using sliding guage method were carried out for 4 women 40's For the analysis of the lower body types horizontal and vertical section maps obtained by sliding gauge method and 2 indices were produced. Based on the slacks construction components produced by the drafts of their lower body surface experimental slacks pattern was designed. Multiple comparison test was used to compare 3 existing slacks patterns with the experimental pattern. 1. The results of the body section map analysis were as follows: 1) In the frontal view silhouette of vertical section maps there were less individual differences in items with skeleton landmarks than those without them. 2) In the shape of horizontal section maps waist section represented more round shape than the others and thigh maximum width section had the flattest shape. Flat ratios(depth/width) of subjects were much higer than those of young women which clarified the change of depth was bigger than that of width with aging process. 2. The slacks construction components for pattern drafting were as follows: 1)Ease amount of waist was 0.5cm and front and back waist girth difference was 1.2cm Ease amount of hip was 1,8cm and front and back hip girth difference was 0.7 cm 2) The amount of dart intake incresed in the order of side(4cm) back(3,6cm) from (2.8cm) The length of dart leg incresed in the order of front side back.

• KIEAE Journal
• /
• 제9권4호
• /
• pp.29-36
• /
• 2009

Artificial ground greening has been developed gradually in accordance with increasing demands of out-door space in Apartment complexes. Nowadays other social demand, environmental load abatement, needs qualitative growth of artificial ground greening as well as quantitative growth. So the objects of this study would be seizing and analyzing changeable items in artificial ground greening in the future, and show drafting materials for the development of spheres in connected with artificial ground greening. For this study, Delphi method was applied. First, three groups of panel, 48 people, were selected. Second, set up items of changes possible in the future from the first questionnaire and additional inquiry. Third, made up the second questionnaire of change possible in the future with Likert summated scale, and finally one way - ANOVA executed; independent variables were items of changes, and dependent variables were three groups of panel. To conclude, although limits of this study, we could glance over general flows and changes in artificial ground greening, and discover items which are hardly changeable and necessary to change in present condition of artificial ground greening.

• Wind and Structures
• /
• 제30권2호
• /
• pp.141-153
• /
• 2020

Probabilistic information regarding directional extreme wind speeds is important for the precise estimation of the design wind loads on structures. A joint probability distribution model of directional extreme typhoon wind speeds is established using Monte Carlo simulation and empirical copula function to fully consider the correlations of extreme typhoon wind speeds among the different directions. With this model, a procedure for estimating directional extreme wind speeds for given return periods, which ensures that the overall risk is distributed uniformly by direction, is established. Taking 5 typhoon-prone cities in China as examples, the directional extreme typhoon wind speeds for given return periods estimated by the present method are compared with those estimated by the method proposed by Cook and Miller (1999). Two types of directional factors are obtained based on Cook and Miller (1999) and the UK standard's drafting committee (Standard B, 1997), and the directional risks for the given overall risks are discussed. The influences of the extreme wind speed correlations in the different directions and the simulated typhoon wind speed sample sizes on the estimated extreme wind speeds for a given return period are also discussed.