• The Research Journal of the Costume Culture
• /
• v.10 no.6
• /
• pp.709-717
• /
• 2002

In the apparel industry, the technology has been advanced rapidly. The use of 3D scanning systems fur the capture and measurement of human body is becoming common place. Three dimensional digital image can be used for design, inspection, reproduction of physical objects. The purpose of this study is to develop a method that drafts men's basic bodice pattern from scanned 3D body surface shape data. In order to pursue this purpose the researchers developed pattern drafting algorithm. The 3D scanner used in this study was Cyberware Whole Body Scanner WB-4. The bodice pattern drafting algorithm from 3D body surface shape data developed in this study is as follows. First, convert geometric 3D body surface data to 3D polygonal mesh data. Second, develop algorithm to lay out 3D polygonal patches onto a plane using Auto Lisp program. The polygon meshes are coplanar, and the individual mesh is continuously in contact with next one The bodice front surface shape data in polygonal patches form was lined up in bust and waist levels. The back bodice was drafted by lining up the polygonal mesh in scapula, chest, and waist levels. in the drafts, gaps between polygons were formed into the darts.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.3
• /
• pp.528-542
• /
• 2024

The aim of this study was to analyze and typify the body shape of tall women aged 20-69 using 3D measurement data from the 2020 8^th Human Dimensions Survey data with greater than 165.0 cm in height defined as large stature. Each body type's characteristics were examined to derive points of differentiation compared to women of average body type. The analysis showed that as height increases, body height, length, and generally body circumference, thickness, and width also increase. However, taller women were found to have thinner waists, indicating a wider, flatter waist area. Waist circumference was also smaller, albeit not at a statistically significant level. Body shapes of adult women over 165.0 cm tall were classified into three types. The following body types were analyzed: thick ankles and drooping shoulders, thin and short torso, tall and long, long torso and thick ankles, large body circumference, thickness and width, normal torso length, and short stature and thin ankles. To develop garments for adult women over 165.0 cm tall, a new drafting method was required set the waist, knee height, and shoulder width.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.26 no.2
• /
• pp.15-32
• /
• 2024

Modern fashion manifests in forms that mirror the diverse lifestyles and personalities of consumers. It transcends mere aesthetic designs and embodyies practicality. There is a preference for comfortable, highly functional attire, leaning towards easy wear. Casual wear, in particular, embraces a sense of freedom not found in standard business attire. It seeks a comfortable, natural silhouette through tactile fabrics rather than sportswear. Loose, drop shoulder sleeves enhance comfort and mobility and often become key elements in casual wear designs. Given that clothing must balance aesthetics with functionality, especially across various activities, it is natural to prioritize functional design. Research on patterns suited for dynamic conditions is imperative. The rise of drop shoulder styles necessitates the development of corresponding sleeve patterns. It is crucial to differentiate pattern drafting methods due to the resulting silhouette variations. This study aims to categorize drop shoulder pattern drafting techniques based on shoulder extension and angle dimensions. Each method will be examined, and drop shoulder sleeve patterns and wear forms will be studied using a 3D virtual system. This research holds significance in providing valuable insights and foundational data for designing diverse drop shoulder sleeve patterns, contributing to their practical development and advancement.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.5
• /
• pp.846-858
• /
• 2008

This study was designed to propose a method to draft bodice block pattern from 3D body scan data. Subjects were ten elderly women in their 60's, who wear basic size(B: 94cm, W: 82cm) garment. Scanning was done using 3D whole body scanner(WB4, Cyberware). Measurements for 3D data and cross section were attained using Auto CAD, by which a upper bodice pattern for elderly women was drawn on the basis of short measured method. The results are as following: As for most items, no significant differences were shown between measurements from Martin's anthropometry and those from 3D scan data, suggesting measurement from 3D scan data could be used to draft a pattern. The drafting equations acquired were as follows; width of pattern=B/2+5.5, width of waist=W/2+3.5cm, dart amount=8cm. Dart distributions were 23%(B.P.) : 20%(front armpit) : 17%(side seam) : 18%(back armpit) : 15%(back protruded point) : 7% (center back line). Through wearing test using 5-point Likert scale, resultant pattern was evaluated as appropriate for elderly women's pattern to get over 4 point. As a result, it might be said that 3D scanning application is effective for elderly women in that it doesn't take time so much as Martin's anthropometry and that their body shape vary compared with those of young women.

• The Research Journal of the Costume Culture
• /
• v.12 no.3
• /
• pp.415-428
• /
• 2004

The purpose of this thesis was to develop torso patterns according to the physical types of men in 20s. The procedure and results are as follows; 1. Of the men in 20s meeting the national average of physique, 4 men were selected and classified into 2 physical types according to their chest and waist circumference drops. One group had 20㎝ drop (Y type) while the other had 16㎝ drop (N type). Through evaluation performed by clothing construction professionals on the 4 upper bodice blocks drafted according to the existent drafting method and dressed on the 4 men, several problems have been found. These problems were adjusted and supplemented to make two new blocks. The fit of the new blocks were evaluated and proved to be satisfactory. 2. The following is the adjustments made to the existent men's torso patterns which had been utilized as the objects the first evaluation experiment. ① Though the back waist length of the pattern from the existent drafting method covered the center back length of the body in both Y type and N type, the front length did not causing it to stand away from the body. To adjust this, 2.0㎝ has been added to the center front length of each pattern so that the waist line could make a bar level to the ground. ② The shoulder line of the pattern from the existent drafting method had the tendency to fall backward. To make the shoulder line to fall in place, it has been moved 1.0㎝ to the front. 0.5㎝ has been added to the should length. ③ The neckline had a tendency to climb up. It has been lowered by 0.5㎝ until the line touched the center front neck point. ④ Though different in degree, the neck circumference did not allow enough width for both physique type causing the neckline to pull at side neck point with diagonal crease. To adjust this, 0.3㎝ and 0.6㎝ has been added to the Y type and N type respectively so that the neckline would touch the side neck point and the neckline could naturally fall into its original position. ⑤ Though different in degree, there was not enough space at the armhole causing wrinkles around this area. Therefore, 0.25㎝ and 0.5㎝ has been added to the front and back of the armholes of the Y and N types respectively. The armhole was made 1.0㎝ deeper only for the N type. ⑥ 1.0㎝ in the front and 0.5㎝ in the back were added to the side scam for the Y type while 0.5㎝ in the front and 0.25㎝ in the back were added for N type. This eliminated the unwanted wrinkles to give the silhouette a smooth look.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.4 s.163
• /
• pp.633-645
• /
• 2007

The purpose of this study is to develop brassiere patterns which are both fitting and functional for women aged 19 to 24(the 1924 generation). We suggested a 'size chart for body measurements' for constructing basic brassiere patterns with six sizes of '70, 75', 'AA, A, B cups', which are used most frequently by the 1924 generation consumers. The scope of research was in reference to the statistical analysis results of the Size Korea(2004) body measurements and the results of the data from the preceding research. The 'drafting method for constructing basic brassiere patterns for the 1924 generation consumers' was completed by selecting a total of 18 subjects, 3 for each six sizes in the scope of research, and three wearing tests were carried out with the subjects. We compiled one brassiere pattern in six sizes obtained with the drafting method of constructing a basic brassiere pattern on another by block pattern in order to observe the phase of change in dimensions and shapes of paper pattern. The result was converted into the variations of a x-axis and a y-axis, and we suggested 'Size Grading Rule' and 'Cup Grading Rule' for the basic brassiere patterns. As the results of the wearing evaluation of the basic brassieres and measuring the variation in body dimensions by wearing brassieres, the dimensions and shapes of the basic brassieres suggested in this research proved to be fitting and to have a wearing effect that brings together and supports the breasts.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1996.10a
• /
• pp.322-329
• /
• 1996

The objective of this study is to develop the CAD system for 2 cell box culvert by ultimate strength design method. C-language & AutoCAD Rl2 were used to create user-friendly computing environment. Consequently, users can easily design 2 cell box culvert under the various conditions, such as design load, total fill depth, underground water level, strength of concrete, and so forth. This system is believed to improve the efficiency and economy by the batch processing of structural analysis, quick drafting and computation of material quantity in the 2 cell box culvert design.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.11
• /
• pp.114-125
• /
• 1997

This paper presents a method that automatically recognizes dimension sets from the mechanical drawings, and that classifies 6 types dimension sets according to functional purpose. In the proposed method, the object and closed-loop symbols are separated from the character-free drawings. Then object lines and interpretation lines are vectorized. And, after recognizing dimension sets(consistings of arrowhead, shape line, tail lines, extension lines, text-string, and feature control frame), we classify recognized dimension sets as horizontal, vertical, angular, diametral, radial, and leader dimension sets. Finally the proposed method converts classified dimension sets into AutoCAD data by using AutoLisp language. By using the methods of geometric modeling, the proposed method readily recognized and classifies dimension sets from complex drawings. Experimetnal results are presented, which are obtained by applying the proposed method to drawings drawn in compliance with the KS drafting standard.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.10
• /
• pp.120-131
• /
• 1997

This paper prsents a new method that automatically recognizes the dimension lines (consisting of shape lines, tail lines and extension lines) from the mechanical drawings. In the proposed method, the object and closed-loop symbols are separated from the character-free drawings. Then the object lines and interpretation lines are vectorized by using several techniques such as thinning, line-vectorization, and vector-clustering. Finally, after recognizing arrowheads by using pattern matching, we recognize dimension lines from interpretation lines by using arrohead's directional vector and centroid. By using the methods of geometric modeling and mathematical operation, the proposed method readility recognizes the dimension lines from complex drawings. Experimental resuls are presented, which are obtained by applying the proposed method to drawings drawn in compliance with the KS drafting standard.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.2 s.27
• /
• pp.145-158
• /
• 1988

The purpose of this study was develop a skirt pattern drafting method for pregnant women on the basis of their physical characteristics. The study procedures and results were as follows; 1. One hundred and one women who were 7,8 or 9 months pregnant were measured on 29 items. The result was computed to obtain descriptive statistics and correlation coefficients between each items. 2. Two new skirt patterns were developed based on the data analysis. 3. The sensory evaluation was applied to evaluate the new patterns for pregnant women by comparing them with the Japanese MOONHWA method skirt pattern for pregnant women. Sensory evaluation for appearance: According to the result of Mann-Whitney test among the three skills the skirt A was most satisfactory, and the next was the skirt B followed by Japanese MOONHWA method Skirt. Sensory evaluation for comfort; The result of Mann-Whitney test showed that the skirt B was comfortable, and the next was the shirt A followed by Japanese MOONHWA method skirt.