• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.10 s.241
• /
• pp.1353-1360
• /
• 2005

Injection-molded products serve a wide range of applications in our modem lives and their significance is ever increasing. However, difficulty of communication among related companies under the present system results in increase of lead time and decrease of production efficiency. The objective of this paper is the development of a web-based draft verification system in mold design processes. Although several commercial CAD systems offer draft verification functions, those systems are very expensive and inadequate to perform collaborative works. For collaborative work under the distributed environment, the proposed system uses native file transforming of CAD data into optimal format by using the ACIS kernel and InterOp. Functions of draft verification modules are constructed over the ActiveX control using the visual C++ and OpenGL. Therefore, collaborators related to the development of a new product are able to verify the draft and undercut over the Internet without commercial CAD systems. The system helps to reduce production cost, errors and lead-time to the market. Performance of the system is confirmed through various case studies.

• Journal of Biosystems Engineering
• /
• v.22 no.2
• /
• pp.117-126
• /
• 1997

A series of soil bin experiment was carried out on sandy loam to investigate if it is possible to predict implement draft by some analog tool. Chisel configuration resembling a cone penetrometer section was used as an analog tool. The angle of cone was 30 degree. Three types of tillage implement, or oriental janggi, moldboard plow and chisel plow were chosen for this study. Experimental tillage speed was 0.22, 0.33, 0.49 m/s ad tillage depth was 8, 12, 16cm. For the experimental tillage speed range, the increase of tillage speed did not affect the tillage draft for the three types of implement and analog tool, but as the tillage depth increased, tillage draft of the three types of implement and analog tool increased linearly. The linear relationship was found between the tillage draft of analog tool and that of three types of tillage implement for the experimental tillage depth and speed range with high value of $R^2$ Thus it was concluded from the above results that an analog tool can be used to predict the tillage draft of oriental janggi, moldboard plow and chisel plow. But more experiment for various soil types and theoretical verification are needed for more generallization.

• Human Ecology Research
• /
• v.53 no.1
• /
• pp.29-47
• /
• 2015

The purpose of this study is to conceptualize the definition of school readiness specific to the context of the Republic of Korea. The school readiness test can be used as basic data to enable early childhood educational institutes to determine the general readiness of preschoolers and provide support to fit individual characteristics. For this purpose, six stages of the school readiness development process were considered, that is, draft development, primary preliminary survey, primary expert verification, secondary expert verification, secondary preliminary survey, and main survey. In the main survey, tests were conducted using the school readiness final draft targeting 344 preschoolers living in Seoul and Gyeonggi-do. The item discrimination power analysis and factor analysis for the examination area and question area were also conducted. Consequently, a test tool was developed on the basic of the results obtained, consisting of 129 items in the five areas of knowledge, function, adaptation, tendency, and attitude. The knowledge area was divided into general, linguistic, and mathematical knowledge, and the function area into fine motor function, basic living ability, expressive function, and gross motor function. The adaptation area was classified into adaptation activity, separation anxiety, maladaptive behavior, and environment adaptation; the tendency area into learning tendency; others understanding, and individual tendency, and the attitude area into rule compliance and life habits.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.1
• /
• pp.65-77
• /
• 2022

The purpose of this study is to develop a competency strengthen program with the aim of training designers who respond to changing national policies in the era of artificial intelligence. To this end, this study was conducted through a total of five steps. First, through literature research and analysis of prior research and literature related to the role of training designers and HRD managers was investigated and analyzed, and based on related prior research, theoretical and academic grounds for training designer competency modeling were prepared. In the second stage, a draft training program was developed to strengthen the competency of training designers based on the needs analysis of stakeholders and advice from education experts. In the third stage, a pilot program was conducted based on the draft training program. In step 4, the effectiveness verification was confuted and the deficiencies of the training program were derived from the pilot program. Finally, the final draft of the training program for strengthening the competency of training designers in the era of artificial intelligence was developed. The final training program consisted of 10 modules and was designed to run for three days. The details of specific training program are presented in the article.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.292-298
• /
• 2010

Recently, with the beginning of the commercial operation of high-speed railway, there have been a number of changes in track structure fields. Also, it is expected that the development and introduction of new technology will be increased afterwards. However, it accompanies a lot of risk to install new track structures of which performance and safety are not verified on permanent ways with high traffic density. Therefore, to minimize the risk and enhance the adoption of new technology, it is required to develop a systemic verification system for track structure. To do this, in this paper, main contents of a draft of guidelines for track structure verification, and main issues in debate such as criteria and method for verification, test conditions and test periods are discussed. Also, a process to choose a most appropriate one for a specific project out of proven track structures by the above verification system, the selection process by the technical investigation committee and the VE process to analyze the economical and maintenance aspects based on LCC concept in Korea Rail Network Authority is introduced.

• Journal of Korean Medicine Rehabilitation
• /
• v.33 no.2
• /
• pp.57-76
• /
• 2023

Objectives This study aims to develop Korean Medicine Clinical Pathway (CP) based on Clinical Practice Guideline of carpal tunnel syndrome to improve quality of treatment and reduce medical cost to maximize the quality of patient management. Methods A draft version of CP for carpal tunnel syndrome is developed by expert agreement and a prospective case study was carried out based on the draft CP. Twenty experts working at various medical institution answered validity verification survey of developed CP. Fifteen patients enrolled in the prospective case study answered survey on demand and satisfaction. Qualification and adjustment process of the draft CP was conducted based on results of both surveys. Results Final version of CP for carpal tunnel syndrome is confirmed after qualification and adjustment on the draft version. Conclusions CP for carpal tunnel syndrome will provide patients with standardized, high-quality Korean medicine treatment and also reduce financial burden of health insurance by reducing medical cost.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.03a
• /
• pp.171-174
• /
• 1997

In this study, a computer program was developed which generates automatically a drawing of the forging design in axisymmetric hot-forging of steel. The program designs a forging envelope from a machined part geometry according to forging design rules: parting line, draft angles, fillet and corner radii, minimum web and rib thicknesses. For the purpose of verification, the program was applied to a machined part from a factory. It was found that the generate forging design agreed well with the actual one used in the factory.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.86-96
• /
• 2013

Unified Speech and Audio Coding (USAC) is the speech/audio codec with the best quality, approved on Final Draft International Standard (FDIS) at MPEG meeting in 2011. Since MPEG conventionally standardizes only the decoder, it is not easy to study on the encoder technologies. Furthermore, Reference Model(RM) shows extremely poor performance. To solve these problems, the open source project(JAME) proposes the methods to make the improved performance of main encoder technologies in USAC. Especially, this paper introduces the encoder modules: the signal classifier for selective operation between two coders, the psychoacoustic model in frequency domain, and window transition technology. Finally, the results of verification test for FDIS and the performance of Common Encoder are appended.

• Journal of Korean Clinical Nursing Research
• /
• v.17 no.1
• /
• pp.70-80
• /
• 2011

Purpose: This study was done to develop performance appraisal guidelines based on the standardized appraisal tool developed in a previous study. Methods: A preliminary investigation was done to draw up a draft guidelines through a literature review. To verify the content validity of the guidelines, 10 nurse managers reviewed the standardized appraisal tool and draft guidelines. Through this process, the performance appraisal guidelines were revised and supplemented. In order to examine the reliability and validity of the guidelines, 13 nurse managers conducted performance appraisal for 178 nurses. Results: As a result, the items of pre-existing tool was reduced from 63 to 30 for usefulness, and guidelines for each items were developed. Conclusion: The revised performance appraisal tool and guidelines are expected to be useful in objectively evaluating nursing performance objectively.

• Journal of Engineering Education Research
• /
• v.19 no.6
• /
• pp.32-37
• /
• 2016

The purpose of this study is to extract a skill level of human resource in the field of science and technology. To accomplish the goal of this study, precedent research was conducted and then, the draft of skill level for Human Resource in the field of Science and Technology (HRST) was created by wrap-up meeting. The skill level of the HRST was finalized after confirming verification of 20 SMEs (Subject Matter Experts) from January to February 2016 by two times. The conclusions are as follows; First, the skill level of the HRST consists five categories. Each of the level has educational background, work experience, certification, duty, major and so on. Second, the contents of the skill level were found to be mostly valid.