• Journal of Biosystems Engineering
• /
• v.29 no.1
• /
• pp.37-44
• /
• 2004

This study was conducted to develop a new drying method far reducing the drying cost and time and to investigate the drying characteristics of oak mushroom. A far infrared dryer of down draft air flow type used for this experiment can control the drying parameters, such as far infrared heater temperature and aeration velocity. The far infrared drying tests were performed at aeration velocities of 0.3 and 0.6m/s under the temperature of 90 and 100$^{\circ}C$ in for infrared heater, respectively. The results were compared and analyzed with those of an heated air drying method used as a control in terms of properties representing the drying characteristics. such as shrinkage rate, color, energy consumption amino acid components, drying rate and moisture ratio. The results obtained from this research can be summarized as follows. 1. The drying rate of far infrared drying was faster than that of heated air drying. With high temperature of far infrared heater and slow aeration velocity, the far infrared drying of down draft air flow type was superior to the heated air drying. 2. Most of far infrared drying conditions required less energy consumption than heated air drying. 3. The shrinkage rates of heated air drying and far infrared drying were decreased by 17.0% and 18.2∼19.8%, respectively. 4. The difference of color on oak mushroom surface before and after drying can be represented as $\Delta$E. $\Delta$E values of far infrared drying and heated air drying were 2.39∼4.55 and 6.77, respectively. 5. The amounts of free amino acids were higher in the far infrared than in the heated air drying. In addition the amounts of Gln and Glu generally were increased and those of Ala, Leu, and Val were decreased in order.

• Journal of Biosystems Engineering
• /
• v.17 no.1
• /
• pp.18-26
• /
• 1992

A mechanical-hydraulic hitch control system has been adapted to most agricultural tractors. But it has various defects due to friction, inertia and hysteresis. Recently a number of electronic-hydraulic hitch control systems have been developed in several countries to improve control performance of the agricultural tractors equipped with a mechanical-hydraulic hitch control system. This study was conducted to develop a new electronic-hydraulic hitch control system using an electro-hydraulic servo valve instead of an on-off valve and to carry out computer simulation of the system. According to the result of computer simulation, the control system showed the best performance when the proportional constants were 9 and 4 for position and draft control respectively. The step and frequency responses were improved as flow rate increased.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.3
• /
• pp.209-219
• /
• 1996

Fieldbus provides a real-time data communication among field devices in the process control and manufacturing automation systems. In this paper, a Petri Net model of the 1993 draft of IEC/ISA fieldbus which is proposed as an international standard of fieldbus network is developed. Based on the Petri Net model, discrete-event simulation model of IEC/ISA fieldbus network is developed. This paper evaluates the network induced delay in the data link layer of IEC/ISA fieldbus using the simulation model. In addition, an integrated discrete-event/continuous-time simulation model of fieldbus system and distributed control system is developed. This paper investigates the real-time data processing capability of IEC/ISA fieldbus and the effect of network-induced delay to the performance of control system.

• The Plant Pathology Journal
• /
• v.31 no.3
• /
• pp.212-218
• /
• 2015

In this study, we developed a species-specific PCR assay for rapid and accurate detection of three Xanthomonas species, X. axonopodis pv. poinsettiicola (XAP), X. hyacinthi (XH) and X. campestris pv. zantedeschiae (XCZ), based on their draft genome sequences. XAP, XH and XCZ genomes consist of single chromosomes that contain 5,221, 4,395 and 7,986 protein coding genes, respectively. Species-specific primers were designed from variable regions of the draft genome sequence data and assessed by a PCR-based detection method. These primers were also tested for specificity against 17 allied Xanthomonas species as well as against the host DNA and the microbial community of the host surface. Three primer sets were found to be very specific and no amplification product was obtained with the host DNA and the microbial community of the host surface. In addition, a detection limit of $1pg/{\mu}l$ per PCR reaction was detected when these primer sets were used to amplify corresponding bacterial DNAs. Therefore, these primer sets and the developed species-specific PCR assay represent a valuable, sensitive, and rapid diagnostic tool that can be used to detect three specific pathogens at early stages of infection and may help control diseases.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2006.09a
• /
• pp.112-121
• /
• 2006

The vertical displacement of a ship on the basis of the sea level is an important parameter for its stability and control. To indicate the displacement on operating conditions, "draft marks" are carved on the hull of the ship in various ways. One of the methods is welding. The position, shape and size of the marks are specified on the shipbuilding rules by classification societies to be checked by shipbuilders. In most cases, high-skilled workers do the welding along the drawing for the marks and welding bead becomes the marks. But the inaccuracies due to human errors and high labor cost increase the needs for automating the work process of the draft marks. In the preceding work, an indoor robot was developed for automatic marking system on flat surfaces and the work proved that the robot welding was more effective and accurate than manual welding. However, many parts of the hull structure constructed at the outdoor are cowed shapes, which is beyond the capability of the robot developed for the indoor works on the flat surface. The marking on the curved steel surface requiring the 25m elevations is one of the main challenges to the conventional robots. In the present paper, the robot capable of climbing vertical curved steel surfaces and performing the welding at the marked position by effectively solving the problems mentioned earlier is presented.

• Journal of Korean Society on Water Environment
• /
• v.25 no.6
• /
• pp.879-885
• /
• 2009

The present study was carried out to develop biological criteria for water quality assessment using benthic diatoms. Selecting of the indicator diatoms, three parameters were considered: broad distribution (180 taxa occurred over 3% at upper level), species abundance (158 taxa occurred over $1.5{\times}10^5cells/cm^2$), and sensitivity (184 taxa occurred more than once as 1st and 2nd dominant species). Overall, total 208 taxa were selected, including 38 varieties, 170 species, 34 genera, 9 families, 3 orders, and 1 phylum. The most dominant taxonomic group (family) was Naviculaceae (52%), followed by Diatomaceae (15%), Nitzschiaceae (12%) and Achnantaceae (11%). COD and TP were proposed as new water quality standards (draft) to improve the existing BOD standard and to manage and control efficiently non-biodegradable organic pollutants. With this regard, we used TP standard (draft) in developing biological water quality criteria for diatoms. TP standards (draft) proposed as Ia = 0.02 mg/L or less, Ib = 0.05 mg/L or less, II = 0.1 mg/L or less, III = 0.2 mg/L or less, IV = 0.4 mg/L or less, V = 0.6 mg/L or less and VI = above 0.6 mg/L. Biological assessment system (4 class system) was developed and proposed for diatom using modified Tropic Diatom Index (TDI). Biological assessment of TDI appear B grade (Good).

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.11-17
• /
• 2008

As of Jan. 2006, numbers of korean registered ocean-going vessels reached 546 which amounted to 13,716,733 G/T. Vessels, generally spooking, finish her life cycle and are dismantled or recycled. However, most of these activities have been done in undeveloped countries instead of in developed countries as the environmental restrictions in developed countries get more strict, accordingly international bodies adopted shipbreaking-related guidelines and prohibit transboundary of obsolete ships, taken as one of wastes. The authors made the Working Guidelines on Shipbreaking to cope with substandard working environment and reduce the environmental damage, and came up with a method to make a inventory of hazardous materials for effective control, finally framed a draft of Environmentally Sound Ship Recycling examining related international conventions such as Basel Convention, IMO Guideline, ILO Guideline and IMO new Convention(draft) on shipbreaking and recycling.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.04a
• /
• pp.449-451
• /
• 2015

When cyber attacks are discovered in nuclear facilities, licensees are required to notify regulatory organizations for quick action. This also helps regulatory organizations to strengthen regulatory capabilities for cyber security. Currently the U.S. issued the final draft rule for Cyber Security Event Notifications. Domestic regulatory activities being at an early stage for cyber security need to implement law for Cyber Security Event Notifications. Since the current laws are focused on the aspect of safety, they are in need of more specific laws for cyber security.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.7 s.238
• /
• pp.868-877
• /
• 2005

We performed the experimental and the numerical study on the comparison of thermal comfort performance indices for cooling loads in the lecture room for 4 cases: Fan coil unit(FCU) or 4-way cassette air-conditioner is respectively operated with the ventilation system or without. We measured the velocity, the temperature distribution and predicted mean vote(PMV) value in the lecture room for 4 different air-conditioning methods. Effective draft temperature(EDT) and PMV were investigated to analyze the characteristics of two thermal comfort indices in the lecture room and to compare their values each other. From the results we knew that there is the similarity between PMV values and EDTs when the room is air-conditioned for cooling loads. It turned out that definition of the control temperature is very important when the EDT is calculated. Finally EDT should not be used to predict the accurate thermal comfort in case that the temperature and humidity are suddenly varied and the zone affected by the solar and inner wall radiation.

• The Korean Journal of Air & Space Law and Policy
• /
• v.15
• /
• pp.40-66
• /
• 2002

The purpose of this paper is to investigate the legal controㅣ, by using the International Criminal Court(ICC) that will enter into force to the most serious crimes of concern to the international community as a whole, and regulates the jurisdiction with respect to the following crimes: (a) The crime of genocide; (b) Crimes against humanity; (c) War crimes; Cd) The crime of aggression. However, the existing ICC Statute excludes (e) Crimes, established under or pursuant to the treaty, which was regulated by the ICC draft statute that the International Law Commission(ILC) examined and submitted to the UN General Assembly in 1994, and which contained aircraft terrorism such as hijacking in the Hague Convention of 1970 or sabotage in the Montreal Convention of 1971 in Annex of ILC draft. Therefore, this paper examines the legal character of aircraft terrorism as one of the most serious crimes of concern to the international community as a whole, and suggests two kinds of legislative comments for the amendment of the ICC Statute including aircraft terrorism as an object of the jurisdiction of the Court, for suppressing aircraft terrorism in advance and ensuring equitable penalty by ICC system.