• Journal of East Asia Management
• /
• 제3권1호
• /
• pp.11-23
• /
• 2022

Under the circumstances of China's slower economic growth, the first document ofthe central committee of the CPC continue to focus on "three agricultures" problems, agriculture play a basic role on China's economic. Since 2007, the first document directly stresses the important role of agricultural and fisheries every year. Central Government Working Report of 2015 also stresses that under the new normal of economy, it is important to improve quality and efficiency of agriculture. Agricultural focus going forward will be on improving capacity of competitiveness, innovation and sustainable development.The fishery as an important part of agriculture plays a vital role in the protection of national food security, the prosperity of the rural economy and the optimization of national food structure. However, the situation faced on accelerating the speed of Chinese fisheries is still grim. As an important fishery breeding city in my country, Weihai has achieved remarkable results in the development of fisheries. Based on the input-output indicators of Weihai City from 2010 to 2020, this article uses the DEA model method to conduct a comprehensive analysis of the factors affecting the fishery production efficiency in Weihai City. This paper calculates the two stages of comprehensive efficiency, pure technical efficiency and scale efficiency, and comprehensive compares the two stages. The research results show that: From 2010 to 2020, the average comprehensive technical efficiency of Weihai fishery was 0.928, the average scale efficiency was 0.963, and the average pure technical efficiency was 0.963. The comprehensive technical efficiency of Weihai fishery production showed an upward and downward trend, the pure technical efficiency showed a downward and then upward trend, and the pure technical efficiency showed a fluctuating trend.

• 한국운동역학회지
• /
• 제34권1호
• /
• pp.25-33
• /
• 2024

Objective: The purpose of this study was to compare the lower extremity muscle activity and knee joint load according to movement speed conditions during the barbell back squat. Method: Nine males with resistance training experience participated in this study. Participants performed the barbell back squat in three conditions (Standard, Fast, and Slow) differing movement speed. During the barbell back squat, muscle activity of the rectus femoris (RF), vastus lateralis (VL), vastus medialis (VM), biceps femoris long head (BFL), semitendinosus (ST), gluteus maximus (GM), gastrocnemius (GCN), and tibialis anterior (TA) was collected using an 8 channel wireless EMG system. The peak flexion angle of the lower extremity joints and the peak resultant joint force in each direction of the knee joint were calculated using eight motion capture cameras and ground reaction force plates. This study was to used the Friedman test and the Wilcoxon signed rank test, to compare lower extremity muscle activity and peak resultant joint force at knee joint according to movement speed conditions during the barbell back squat, and the statistical significance level was set at .01. Results: In the downward phase of the barbell back squat, the RF and TA showed the higher muscle activity in the fast condition, and in the upward phase, RF, VL, VM, BFL, ST, GM, and TA showed the higher muscle activity in the fast condition. As a results, analyzing of the load on the knee joint, in the downward phase, and in the upward phase, the higher peak compressive force of the knee joint was showed in the fast condition. Conclusion: The barbell back squat with fast movement speed was more effective due to increased muscle activity of lower extremity, but one must be careful of knee joint injuries because the load on the knee joint may increase during the barbell back squat with fast movement speed.

• Journal of Platform Technology
• /
• 제10권2호
• /
• pp.10-19
• /
• 2022

이동의 불편을 겪는 사람을 위한 휠체어 등 이동 보조 장치들이 전동화, 자동화되고 있다. 이러한 이동 보조 장치는 평지 이동에 적합하도록 설계, 제작되어 있어 바닥 면의 높이가 다른 계단 구간의 이동에 적합하지 않다. 전동화, 자동화된 이동 보조 장치는 전방에 계단이 있는 경우 이동 방향을 변경하거나 정지해야 한다. 만약 사용자 또는 자동 제어 시스템이 적절한 시간 내 방향 전환 또는 정지하지 않으면 계단과 충돌 또는 구르는 등의 사고가 발생할 수 있다. 본 논문에서는 한 개의 거리 측정 센서를 이용하여 바닥 면까지의 사거리를 측정하여 계단을 검출하는 방법을 제안한다. 본 논문에서 제안하는 방법은 사거리 측정을 위해 센서를 기울이는 각도와 센서가 이동 보조 장치 등의 이동체에 설치되는 높이 등의 매개변수를 고려하여 평지일 때 사거리의 예측 값과 측정값 사이의 차이를 이용하여 상향 계단 또는 하향 계단을 검출한다. 본 논문에서 제안한 방법으로 검출된 계단에 대한 정보가 정보를 전동화, 자동화된 이동 보조 장치의 제어기에 제공되면 제어기가 적절한 제어 동작을 수행할 수 있어 이동 보조 장치가 계단 구역 진입으로 인해 발생할 수 있는 사고를 방지할 수 있다.

• 한국강구조학회 논문집
• /
• 제17권2호통권75호
• /
• pp.183-194
• /
• 2005

기존의 연속 프리플렉스 거더교는 내측지점부 바닥판 콘크리트에 압축력을 도입시키기 위해 내측지점을 상승시키고 부모멘트 구간만큼의 바닥판 콘크리트를 타설하고 하강시키는 시공법을 사용하였다. 그러나 상기의 시공법은 장시간의 내측지점 상승 작업과 종곡선의 굴곡 문제 등 여러 가지 시공상 문제점을 가지고 있다. 따라서 본 논문은 이러한 문제점을 해소하기 위해 내측지점 및 외측지점을 하강시키는 공정만을 이용한 개선된 연속 프리플렉스 합성형 거더교의 시공법을 제시하였으며, 특정화된 연속 프리플렉스 거더교의 설계 프로그램에만 의존하지 않고 프리플렉스 거더교의 단면을 쉽게 추정할 수 있는 체계화된 설계식을 제시하였다.

• 한국측량학회지
• /
• 제33권3호
• /
• pp.181-192
• /
• 2015

Bathymetry change due to the 2011 Tohoku (M9.0) earthquake was investigated through satellite altimetry-derived free-air gravity anomalies (SAFAGA) and shipborne measurements. The earthquake occurred at the plate boundaries near the northeastern coast of Japan, where the oceanic plate subducts beneath the continental plate along deep-sea trench. Data analyzed in this study include SAFAGA from Scripps Institution of Oceanography (SIO), shipborne bathymetry (SB) from the U.S. National Geophysical Data Center (NGDC) and the Japan Agency for Marine-Earth-Science And Technology (JAMSTEC). To estimate the bathymetry change, a reference bathymetry before the earthquake was predicted by gravity-geologic method (GGM) and Smith & Sandwell’s (SAS) method. In comparison with the bathymetry models before the earthquake, GGM bathymetry model generated by a tuning density contrast of 17.04 g/cm³ by downward continuation method was selected because it shows better bathymetry in the short wavelength below about 6 km. From the results, remarkable bathymetry change of about ±50 m was found on the west side of the Japan Trench caused by the earthquake.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.294-306
• /
• 2019

On the basis of the Computational Fluid Dynamics technique (CFD) combined with the overlap grid method, this paper establishes a numerical simulation method to study the problem of ice-propeller interaction in viscous flow and carries out a simulation forecast of the hydrodynamic performance of an ice-class propeller and flow characteristics when in the proximity of milling-shape ice (i.e., an ice block with a groove cut by a high-speed revolving propeller). We use a trimmed mesh in the entire calculation domain and use the overlap grid method to transfer information between the domains of propeller rotation calculation and ice-surface computing. The grid is refined in the narrow gap between the ice and propeller to ensure the accuracy of the flow field. Comparison with the results of the experiment reveals that the error of the hydrodynamic performance is within 5%. This confirms the feasibility of the calculation method. In this paper, we calculate the exciting force of the propeller, analyze the time domain of the exciting force, and obtain the curve of the frequency domain using a Fourier transform of the time-domain curve of the exciting force. The existence of milling-shape ice before the propeller can greatly disturb the wake flow field. Unlike in open water, the propeller bearing capacity shows a downward trend in three stages, and fluctuating pressure is more disordered near the ice.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2006년도 춘계학술발표회
• /
• pp.15-20
• /
• 2006

본 연구에서는 국내 해운회사의 안전관리를 위한 여러 가지 투입요소와 산출요소들에 대한 자료를 설문조사하고 각 해운 회사간의 안전관리체제 이행에 따른 효율성을 DEA 분석법을 사용하여 분석하였다. 1998년$\sim$2004년까지 각 해운회사의 안전관리체체의 운영효율성을 DEA 모형으로 분석한 결과 효율성 평균지수가 매년 감소하는 추세를 나타내었다. 효율성 평균지수가 매년 낮아지는 경향을 보이는 이유는 해양사고 건수, PSC 지적 건수, 선박보험료, P&I 보험료는 매 년 감소하는 것에 비해 선박수리비, 선용품비와 선박 불가동일수는 매년 감소하지 않고 오히려 증가하는 경향을 보이고 있는 것이 그 주요한 원인으로 분석되었다.

• 한국정밀공학회지
• /
• 제24권7호
• /
• pp.98-105
• /
• 2007

In modern industries, materials are required that possess multi-functional properties and at the same time flexibility in their shapes with structural stability. The major technology realizing this requirement consists of thinning metal wires and laying them with stable contact nodes. This research has dealt with a new method to manufacture thin wires by drawing without applying dies, but with introducing enforced necking, which enables to process multi-ends. Based on the new method, the process dynamics was modelled and its steady-state characteristics were analyzed. Results showed that the profiles of the material velocity in the drawing zone increased with a downward convex shape, while the cross-sectional area decreased with the shape of upward convex. The microwave heating turned out to be effective in wire drawing, but dependent on the input feeding direction. The variation in the diameters of the drawn wires was negatively affected by increasing the drawing ratio.

• 한국지진공학회논문집
• /
• 제17권5호
• /
• pp.209-217
• /
• 2013

In order to verify the reliability of numerical site response analysis program, both soil free-field and base rock input motions should be provided. Beside the field earthquake motion records, the most effective testing method for obtaining the above motions is the dynamic geotechnical centrifuge test. However, need is to verify if the motion recorded at the base of the soil model container in the centrifuge facility is the true base rock input motion or not. In this paper, the appropriate input motion measurement method for the verification of seismic response analysis is examined by dynamic geotechnical centrifuge test and using three-dimensional finite difference analysis results. From the results, it appears that the ESB (equivalent shear beam) model container distorts downward the propagating wave with larger magnitude of centrifugal acceleration and base rock input motion. Thus, the distortion makes the measurement of the base rock outcrop motion difficult which is essential for extracting the base rock incident motion. However, the base rock outcrop motion generated by using deconvolution method is free from the distortion effect of centrifugal acceleration.

• 인터넷정보학회논문지
• /
• 제9권1호
• /
• pp.129-135
• /
• 2008

본 논문은 가중 퍼지소속함수 기반 신경망(Neural Network with Weighted Fuzzy Membership Functions, NEWFM)을 사용하여 생성된 퍼지규칙과 비중복면적 분산 측정법에 의해 추출된 최소의 특징입력을 이용하여, 1일 후의 KOSPI 예측을 하는 방안을 제안하고 있다. NEWFM은 KOSPI의 최근 32일 동안의 CPPn,m(Current Price Position of day n for n-1 to n-m days)을 이용하여 1일 후의 KOSPI 상승과 하락을 예측한다. 특징입력으로써 CPPn,m과 최근 32일간의 CPPn,m을 웨이블릿 변환한 38개의 계수들 중 비중복면적 분산 측정법을 적용하여 추출된 5개의 계수가 사용되었다. 제안된 방법으로 1991년부터 1998년까지의 실험군을 사용한 결과 평균 67.62%의 예측율을 나타내었다.