• 자원환경지질
• /
• 제23권3호
• /
• pp.353-358
• /
• 1990

This paper presents numerical experiments on migration of synthetic seismograms using by $45^{\circ}$ wave equation. The seismograms used are zero-offset seismogram (corresponding to stacked section) on point reflectors, dipping plane reflector, faulted and folded layers. The seismograms are constructed by upward continuation of seismic source wavelets, exploading on subsurface reflection interfaces, to the earth surface. The synthetic seismograms are migrated by downward continuation and imaging. The upward and downward continuations are implemented by solving the $45^{\circ}$ wave equation with the finite-difference method. Migration of the synthetic data used in this study results in relatively accurate reposition of subsurface structures while the synthetic sections are quite different from the structures.

• 대한기계학회논문집B
• /
• 제33권9호
• /
• pp.674-681
• /
• 2009

Turbulent mixed convection in heated vertical annulus is investigated using Direct Numerical Simulation (DNS) technique. The objective of this study is to find out the effect of buoyancy on turbulent mixed convection in heated vertical annulus. Downward and upward flows with bulk Reynolds number 8500, based on hydraulic diameter and mean velocity, have been simulated to investigate turbulent mixed convection by gradually increasing the effect of buoyancy. With increased heat flux, heat transfer coefficient first decreases and then increases in the upward flow due to the effect of buoyancy, but it gradually increases in downward flow. The mean velocity and temperature profiles can not be explained by the wall log laws due to the effect of buoyancy, too. All simulation results are in good quantitative agreement with existing numerical results and in good qualitative agreement with existing experimental results.

• Journal of Chest Surgery
• /
• 제18권3호
• /
• pp.391-397
• /
• 1985

Ebstein`s anomaly is a rare congenital cardiac malformation and characterized by downward displacement of an abnormal tricuspid valve cusps. But until now, the ideal surgical correction is still controversial. We present a case of Ebstein`s anomaly experienced lately. The patient was 13 year old girl with the complaints of dyspnea on exertion, fatigability and cyanosis. Echocardiography revealed downward displacement of septal leaflet of tricuspid valve and atrialized right ventricle. Cardiac catheterization and cineangiography revealed ASD and large right atrium. During operation, the atrialized right ventricle was plicated and tricuspid annuloplasty was done. And the two secundum type ASD`s were closed by direct suture closure. The patient`s postoperative course was uneventful and discharged on the 24th postoperative days.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.179-184
• /
• 2001

The objective of this study is to clarify the seismic capacity and the characteristics in the hysteretic behavior of RC structures with nonseismic detailing. To do this, an exterior beam-column subassemblage was selected from a 10-story RC building and 6 1/3-scale specimens were manufactured with 3 variables; ⑴ with and without slab, ⑵ upward and downward direction of anchorage for the bottom bar in beams, and ⑶ with and without hoop bars in the joint region. The test results have shown that ⑴ the existence of slab increased the strength in positive and negative moment, 25% and 62%, respectively; ⑵ the Korean practice of anchorage (downward and 25 $d_{b}$ anchorage length) caused the 8% reduction of strength and the early strength degradation when compared with the case of seismic details; and ⑶ the existence of hoop bars in the joint region does not show significant difference because the size of column is much larger than that of beam.m.

• 한국정밀공학회지
• /
• 제14권3호
• /
• pp.57-65
• /
• 1997

In this study, a cutting force in the Ball-end milling process is calculated using Z-map. Z-map can describe any type of cutting area resulting from the previous cutting geometry and cutting condition. Cutting edge of a ball-end mill is divided into infinitesimal cutting edge elements and the position of the ele- ment is projected to the cutter plane normal to the Z axis. Also the cutting area in the cutter plane is obtained by using the Z-map. Comparing this projected position with cutting area, it can be determined whether it engages in the cutting. The cutting force can be calculated by numerical integration of cutting force acting on the engaged cutting edge elements. A series of experiments such as contouring and upward/downward ramp cutting was performed to verify the calculated cutting force.

• 소음진동
• /
• 제11권2호
• /
• pp.329-335
• /
• 2001

The analytical model of the ground wave can be used for the prediction of the noise level from a source above a plain and homogeneous ground surface with no obstacles nearby. Sound propagation along the surface of the ground can be affected by the roughness of the ground surface and the direction of the wind. The effects of the ground surface and the wind can be formulated in terms of the ground coefficient and the noise source parameter. Upward and downward conditions can also be addressed by considering the direction of the wind. The ground coefficient and the noise source parameter are estimated using the measured noise levels of two points under particular environmental condition, and the noise levels of arbitrary points under the same environmental condition can be estimated. The proposed method can be utilized to estimate the noise level of specific noise environment and its validity was confirmed with the results of actual field measurement.

• 대한수학회보
• /
• 제47권6호
• /
• pp.1105-1119
• /
• 2010

We consider jump processes which has only downward jumps with size a fixed fraction of the current process. The jumps of the pro cesses are interpreted as crashes and we assume that the jump intensity is a nondecreasing function of the current process say $\lambda$(X) (X = X(t) process). For the case of $\lambda$(X) = $X^{\alpha}$, $\alpha$ > 0, we show that the process X shold explode in finite time, say $t_e$, conditional on no crash For the case of $\lambda$(X) = (lnX)$^{\alpha}$, we show that $\alpha$ = 1 is the borderline of two different classes of processes. We generalize the model by adding a Brownian noise and examine the blow up properties of the sample paths.

• 전자공학회논문지B
• /
• 제31B권5호
• /
• pp.95-107
• /
• 1994

A new efficient contour following algorithm for connected-component labeling processing is proposed. The basic idea of the algorithm is that the total number of downward chain codes is the same as one of upward chain codes along the closed contour. If the chain code direction is upward, then region start mark is assigned at the chain code departure pixel and if the chain code is downward, then region end mark is assigned at the chain code arrival pixel. The proposed algorithm extracts directly the contour information from only the current direction information of chain. This makes the algorithm simple and fast and requires less memory with comparison to the conventional algorithms.The proposed contour following algorithm can be applied to the various kind of image processing such as region filling, restoration and region feature extraction.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.315-318
• /
• 2005

Vlasov's hypothesis provides a way to solve the torsional problem with warping torsion of double T-beam section. Not only the warping torsion of the gross section of double T-beam but the torsional resistances of PS tendons and reinforcements have to be considered together in the analysis in which the latter is the restoring roles provided by the upward and downward force components in a geometrical symmetric configuration. It means that the torsional resistances of PS tendons and reinforcements, usually ignored, store the strain energies due to up-downward geometrical changes. Space frame element with 7-degrees of freedom are used for the finite element approximation of the real behaviors. Bimoments and angles of twist obtained from the proposed method show good agreements with those of 3-D. finite element analysis and analytical analysis

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.43-47
• /
• 2008

CWSII method was developed to overcome the problems of frequent occurrence in the application of existing downward construction methods, especially in the case of using slurry wall instead of SCW or CIP as a retaining wall. By the improvements in connecting steel beams with the wall, CWSII method is able to ensure the settlement of a steel beam and the diaphragm effect of a slab while reducing the degree of difficulty and the term of works and the cost of construction. As the desired results, CWS method can be applied as a practical downward construction method regardless of the type of retaining wall. In this paper, besides the concept and features of CWSII method, it can be seen that the method can provide reliable and economical performances by comparing with existing methods.