• The Korean Journal of Ecology
• /
• v.17 no.3
• /
• pp.251-260
• /
• 1994

Nitrification potential bioassay and terpenoid analyses were performed to determine the roles of terpenoid as an inhibitor of nitrification in the Douglas fir (Pseudotsuga menziesii) forests. The effect of terpenoids in the forest floor was also tested by adding $10{\mu}g/ml$ of four terpenoids(${\alpha}-pinene,{\beta}-pinene,{\gamma}-terpinene, and terpinolene) to mineral soils. The amount of terpenoids in the litter was higher than that in the soil and varied over time, but the amount of terpenoids in the soils was relatively constant. The correlation between the amount of terpenoids in the litter and ammonium oxidation was in inverse proportion to that in the mineral layers $(r^2=0.678)$. Inhibition of ammonium oxidation by terpenoids in the litter was always higher than in the mineral layer, but nitrite oxidation was different from the ammonium oxidation. The fact that there was greater nitrate production from ammonium in the mineral layer than in the forest floor layer seems to be due to the less amounts of terpenoids in the mineral layer. The result of the experiment in which four terpenoids were added to the mineral layer suggests that, after some lag time, the four terpenoids were effective in inhibiting ammonium oxidation. However, nitrite oxidation did not appear to be affected by the four terpenoids. Accordingly, all of our results suggested that terpenoids in Douglas fir forests apparently would act as a part of the inhibitors of nitrification.

• Journal of Mushroom
• /
• v.6 no.2
• /
• pp.43-46
• /
• 2008

This study was carried out to investigate the utilization of platanus for Pleurotus ostreatus culture medium. The results are as follows ; The growth of mycelial was the highest in the mixture medium of platanus sawdust 90% with rice bran 10% as of 12.8cm after 30days culture. The mycelia density of most of media were high exception of mixture medium, platanus tree sawdust 60% with rice bran 40%. The total nitrogen, phosphate, and potassium contents in all mushroom media were tended to decrease after oyster mushroom growth. In platanus sawdust 90% with rice bran 10%, total nitrogen, potassium, calcium and magnesium content of fruit body were higher than other treatments, but phosphate content was the highest in Douglas-fir sawdust 80% with rice bran 20% treatment as of 0.92%. The mycelial culture period was ranged 26~37 days according to different media, the mushroom yield of culture medium with platanus tree sawdust 80% with rice bran 20% was increased 18% compare to control Douglas-fir sawdust 80% with rice bran 20%.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.126-137
• /
• 2014

Characteristics of heating and drying of Canadian-imported Douglas-fir timber using microwave in order to secure convenience and quality of drying timber and to get basic data for secondary conservation treatment are as follows: As the results of analysis of change curves of internal temperature of the timber after irradiating it, round timber and board timber showed stable heat distribution, heat consumption and surface water-content in heating with 30kW for 30 minutes and 120 minutes and with 40kW for 3 minutes and 9 minutes, respectively. Especially, surface water-content distribution according to heating by microwave showed very even leveling and water-content decrease rate was also more 30% compared to its weight showing excellent dry efficiency. And in case of soaking timbers into liquid chemicals for secondary conservation according to the analysis results of heat consumption, it is expected that large amount of preservative will be permeated. Therefore, timber heated by microwave is remarkably available for using industrial materials and developing secondary utilized products with its fast water-content decrease and dryness and higher heat consumption.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.2
• /
• pp.107-121
• /
• 2021

The purpose of this study is to optimize the bonding method of the plywood suitable for cross-laminated timber (CLT) with plywood as a core by analyzing the flexural performance and failure mode according to the lamina species, the method of bonding plywood in the longitudinal direction, and whether or not adhesive is applied to the joint. In the case of the Douglas fir lamina layer, the modulus of elasticity decreased by about 11.5% due to longitudinal bonding, and the modulus of rupture increased or decreased according to the adhesive application and bonding method. The optimal conditions were derived as the butt joint without adhesive, half lap joint with adhesive, and butt joint. In the case of the larch lamina layer, the modulus of rupture and the modulus of elasticity decreased by about 15% and 40%, respectively. When using the half lab joint and tongue & groove joint, it is believed that it reduces the load transmitted to the middle layer by primarily preventing the failure on flexure at the joint of the plywood layer. From the results of this study, the larch lamina layer used in the manufacturing process of Ply-lam CLT did not show any difference based on the bonding method. Butt joint and half lap joint bonding method are determined to be suitable when using Douglas fir lamina layer.

• Korean Journal of Agricultural Science
• /
• v.9 no.1
• /
• pp.239-249
• /
• 1982

The outlines of superior stands, including species mixed, age classes, canopies, and ecological conditions of the stands, were examined in the forests of west Germany, Sweden, and Netherland. The establishment schemes of tree seed orchards for the production of high genetic quality seed were also investigated in the present study. 1. The meteorological conditions, abundant in precipitation and high in relative humidity, prove it to be oceanic climate characteristics in the Scandinavia located in high latitude and north-western part of Europe. The photo periodical characteristics following to day-length and the frost times determine the patterns of tree growth and distribution as well as the tree adaptability due to bud-setting and bud-flushing in Sweden forest. 2. The European forests are generally characterized by dense multistoried forest type composed of upper stories of tall tree species such as Norway spruce, fir, Scots pine and beech, lower stories of shade tolerant poles and saplings of spruce, fir, beech, and floor vegetations covered with birch, oak and hornbeam etc. 3. The single tree selection method and group shelterwood method are commonly applied for silvicultural system but shelterwood method and clearcutting method practiced partially in limited area. Badischer Femelschlagbetrieb and Bayerischer Femelschlagbetrieb are popularized to the regeneration of Schwarzwald but selection method applied in part. 4. Tree cuttings are properly limited so as not to exceed annual increment volume for the sustained yield and the preservation of ecosystem in European forest management. Land preservation and recreation function are more interested with the promotion of wood production in the forest management. 5. Careful attentions are paid to the reforestation of the introduced exotic species, such as Douglas-fir, red oak, pines from America, Japanese larch, Italian poplar etc., with concern against the insect and pest damage, and the meteorological damage. 6. Some intensive studies on tree improvement, such as selection of plus tree, selection of plus stand for seed collection, provenance trial, progeny test of clone, hybrid seed orchard for clone complexing, are performed in the countries and the great part of the seed required for reforestation are supplied from the seed orchard established in Sweden and Netherland.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.512-515
• /
• 2006

Forest stand height and volume are important indicators for management purpose as well as for the environmental analysis. Shuttle Radar Topography Mission (SRTM) is backscattered over forest canopy and DSM can be acquired from such scattering characteristic, while National Elevation Dataset (NED) provides bare earth elevation data. The difference between SRTM and NED is estimated as tree height, and it is correlated with forest parameters, it is correlated with forest parameters, including average DBH, Trees per acre, net BF per acre, and total Net MBF. Especially, among them, net Board Foot(BF) per acre is the index that well represents forest volume. The Project site was Douglas-fir dominating plantation area in the western Washington an the northern Oregon in the U.S. This study shows a relationship of high correlation between the forest parameters and the product from SRTM, NED, and ETM+. This research performs multi regression analysis and regression tree algorithm, and can get more improved relationship between several parameters.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.2
• /
• pp.274-282
• /
• 2016

This aims of this study were to investigate the relationship between non-destructive evaluation (NDE) and actual bending properties of particleboard, and to predict the bending properties of three-layer particleboard. Three kinds of raw materials, i.e. Hinoki (Chamaecyparis obtusa Endl.) strand, knife-milled Douglas-fir (Pseudotsuga manziesii (Mirb) Franco), and hammer-milled matoa (Pometia spp.) obtained from wooden industry, were utilized as furnish for experimental panel with methylene diphenyl diisocyanate (MDI) resin as binder. The NDE test was conducted by hit sounds using an FFT analyzer according to the spectrum peak of wave frequency, while the static bending test was conducted according to JIS A-5908. The results reveal that the dynamic Young's modulus as an NDE test has a potential for being used to predict the elastic bending of particleboards by a specific equation for adjusting its proper values. The values of NDE and static test are significantly different with a deviation range at 3-20%. The bending stiffness of three-layer particleboards manufactured from different wood species is predictable by observing the bending stiffness of two elements based on the thickness of its layers. The predicted values of bending stiffness and static test are significantly different with a deviation range at 5-24%.

• Structural Engineering and Mechanics
• /
• v.17 no.5
• /
• pp.627-639
• /
• 2004

The objective of this research was to evaluate the performance of metal-plate-connected truss joints subjected to cyclic loading conditions that simulated seismic events in the lives of the joints. We also investigated the duration of load factor for these joints. We tested tension splice joints and heel joints from a standard 9.2-m Fink truss constructed from $38-{\times}89-mm$ Douglas-fir lumber: 10 tension splice joints for static condition and for each of 6 cyclic loading conditions (70 joints total) and 10 heel joints for static condition and for each of 3 cyclic loading conditions (40 joints total). We evaluated results by comparing the strengths of the control group (static) with those of the cyclic loading groups. None of the cyclic loading conditions showed any strength degradation; however, there was significant stiffness degradation for both types of joint. The results of this research show that the current duration of load factor of 1.6 for earthquake loading is adequate for these joints.

• Journal of the Korea Furniture Society
• /
• v.22 no.4
• /
• pp.323-329
• /
• 2011

In our country, domestic species can not be used as a structural member because we have not yet grading system. So, to utilize as a basic data of grading system, bending test and numerical modelling on structural member were conducted in this study. 35 of Douglas-fir, 2" ${\times}$ 6", span 2.4 m were tested for the bending properties, and Ansys software was used to analyze the numerical modelling on the structural members. The data of knots were inspected and applied in numerical modelling. To obtain the accuracy of analysis, nonlinear numerical analysis was carried out instead of linear numerical analysis. Ultimate load had a wide range from 4883N to 11,738 N, and maximum deformation also had a range from 26 mm to 68 mm. Average of ultimate load was 8,616 N, and that of maximum deformation was 48 mm. The distinctive features of failure types were simple tension type and cross-grain tension type. Ulitmate load and maximum deformation from numerical modelling were 7,504 N and 37 mm. The numerical modelling drawn by this study is available to all species, and reasonable prediction on the bending performance is possible with only some material properties.

• The Korean Journal of Mycology
• /
• v.38 no.2
• /
• pp.125-129
• /
• 2010

This study was carried out to elucidate suitable spawn culture for an artificial cultivation of Neolentinus lepideus. The optimum culture conditions of the liquid spawn were deffated soy flour for main material, 12 days for culture period and 0.9 vvm for aeration volume, respectively. Sawdust spawn was appropriate for douglas fir sawdust and deffated corn flour (95 : 5, v/v) for mycelia growth and fruiting body formation. In case of liquid spawn, cultivation period was two shorter than sawdust spawn and mushroom yield was 111.9 g per 850ml cultivation bottle. In conclusion, the suitable spawn for fruiting body production was found to be liquid spawn than sawdust spawn with considering cultivation period and mushroom productivity.