• Journal of the Korean Wood Science and Technology
• /
• 제48권4호
• /
• pp.488-502
• /
• 2020

In this study, the moisture absorption and desorption properties presented by the Health-Friendly Housing Construction Standards of South Korea were compared using the wood of three tree species (Douglas-fir, Hinoki, Larch) and two types of wood-based materials(Plywood, WML Board^Ⓡ). The national standards for functional building materials present that the amounts of moisture absorption and desorption should be at least 65g/㎡ on average, respectively according to the test method under KS F 2611:2009. Therefore, in this study, the moisture absorption/desorption properties of materials with no treatment (Control), with punching, and with surface stain finishing and the moisture absorption/desorption property improvement effects of the treatments were compared and analyzed. According to the results of this study, it was evaluated that all five types of wood and wood-based materials tested did not satisfy the amount of moisture absorption/desorption of at least 65g/㎡, which is the performance standard for moisture absorption/desorption functional building materials, indicating that untreated wood and wood-based materials cannot be applied as functional finishing materials according to the Health-Friendly Housing Construction Standards. The surface stain finishing greatly reduced the moisture absorption and desorption rates of the materials, and the amounts of moisture absorbed and desorbed were also shown to decrease by at least two times on average. When the surfaces of the materials were punched with Ø4mm holes at intervals of 20 mm, the moisture absorption/desorption areas increased from 18% to 51%, and this increase was shown to be capable of increasing the amounts of moisture absorbed/desorbed by 29% on average at the minimum, and 81% on average at the maximum. The effects of punching were shown to be identical even in cases where the materials were stain finished. For the application of wood or wood-based materials as eco-friendly, health-friendly, and moisture absorption/desorption functional building materials hereafter, it is judged that new physical and chemical improvement studies should be conducted, and treatment methods should be developed.

• 한국균학회지
• /
• 제39권3호
• /
• pp.171-174
• /
• 2011

적정 영양원을 선발하기 위하여 5가지의 재료(옥수수가루, 옥수수피, 콘코브, 비트펄프, 감자전분)를 이용하여 재배실험을 실시한 결과 혼합배지의 총 질소함량은 옥수수가루 첨가구가 0.45%로 가장 높았다. 혼합배지에 따른 배양율과 재배일수는 옥수수가루 처리구에서 배양율 97%로 가장 좋았고, 재배기간 43일로 가장 짧았다. 그리고 옥수수가루 처리구에서 수량은 122 g/1 kg 봉지, 생물학적효율은 35%로 다른 처리구에 비해 가장 높았다. 자실체 생산량에 관여하는 인자 분석에서는 총 질소함량 (r = 0.95)과 조지방(r = 0.65)으로 나타났다. 이상의 결과 잣버섯 재배는 배지 영양원으로 옥수수가루와 자실체 생산량에 관여하는 인자로 총질소함량으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제12권1호
• /
• pp.31-37
• /
• 1984

For the modification of kiln drying schedule, relations between resistance to drying Rd and the moisture content or drying times were found for 4/4, 6/4 and 8/4 green Douglas fir heartwood by the mild drying schedule and the severe drying schedule until the average moisture content was about 10 percent. The results of this study were as follows. 1. Resistance to drying of thicker lumber was higher than that of thinner lumber and resistance to drying of three different thicknesses were negligible between the mild-and the severe drying schedule. The relationships between resistance to drying and two schedules or three thicknesses of lumber were $Rd_1=1.830{\times}10^5\;M^{-2.24}$ for 4/4 lumber by the mild drying schedule, $Rd_2=1.822{\times}10^5\;M^{-2.25}$ for 4/4 lumber by the severe drying schedule, $Rd_3=2.352{\times}10^5\;M^{-2.14}$ for 6/4 lumber by the mild drying schedule, $Rd_4=3.457{\times}10^5\;M^{-2.27}$ for 6/4 lumber by the severe drying schedule, $Rd_5=1.317{\times}10^6\;M^{-2.56}$ for 8/4 lumber by the mild drying schedule, $Rd_6=8.267{\times}10^5\;M^{-2.40}$ for 8/4 lumber by the severe drying schedule. 2. Thinner lumber exhibited lower level of moisture content and shorter drying time required at intersection point between the moisture content and resistance to drying as a function of drying time than those of thicker lumber. Drying time of mild drying was longer than that of severe drying and similar to the level of moisture content at intersection point.

• 한국버섯학회지
• /
• 제16권4호
• /
• pp.267-271
• /
• 2018

봉지재배용 표고의 적합한 배지를 개발하고자 본 연구를 수행한 결과 참나무톱밥+미송톱밥+미강(40:40:20, v/v) 혼합배지인 T5에서 pH 5.3으로 대조구와 비슷하였으며 C/N율은 71.8로 대조구 85.2 대비 낮은 경향이었다. 배양특성은 T5에서 대조구 대비 산조701호는 13일, 농진고는 18일 배양기간이 단축되었다. 자실체 특성조사 결과 산조701호 품종에서는 T5에서 대조구 대비 갓이 크고 두꺼웠으며, 대도 길고 두꺼워 개체중이 높게 나타났다. 반면 농진고 품종에서는 대조구와 비슷한 경향이었다. 배지조성에 따른 혼합배지별 수량은 T5에서 대조구 대비 산조701호는 17%, 농진고는 19% 증수되었다. 이러한 연구 결과를 바탕으로 참나무톱밥의 50%를 미송톱밥으로 대체할 경우 배양기간이 단축되고 수량이 증수되며 또한 생산비 절감이 가능할 것이라 판단되었다.

• 한국가구학회지
• /
• 제25권4호
• /
• pp.250-257
• /
• 2014

In recent years, young customers whose priority are on rationality and practicality of products and set a high value on space usage and storage efficiency have shown larger interest in knocked down furniture, thus its purchase has been on the rise. A baby bed design utilizing knocked down system suggested in this article, allows simple assembly and disassembly, easy transportation, easy movement, and also possible to recycle. Using laminated wood made of Douglas fir, a natural material, a baby bed is designed as knocked down structure. Its prototype is made to suggest easy assembly and disassembly design, which does not require any hardware. If efforts are put on the research of furniture design and its product development, focusing on the applicable usage and strength of knocked down furniture, it can become one of the solutions to the development of currently stagnant domestic furniture industry.

• Journal of the Korean Wood Science and Technology
• /
• 제18권2호
• /
• pp.16-24
• /
• 1990

아세틸화(化) 고분자(高分子) 축합(縮合)탄닌의 젤침투 크로마토그래피 분석(分析)을 위해 일반적(一般的)으로 사용(使用)되고 있는 폴리스타이렌 표준물질(標準物質)은 부정확(不正確)한 교정(矯正)값을 준다. 한편 유도체화 하지않은 축합탄닌의 젤침투 크로마토그래피는 폴리스타이렌 디비닐벤젠 코폴리머 컬럼과 디메틸 포름아미드를 용매(溶媒)로 사용(使用)하여 매우 만족스럽게 분석(分析)될 수 있었다. 그 컬럼의 교정은 유도처리 되지않은 고분자(高分子) 축합(縮合)탄닌을 이용(利用)하여 수행되었으며 고분자 탄닌을 유도처리 할 필요가 없으므로 탄닌의 신속한 분자량(分子量) 결정(決定)이 가능하고 컬럼 크로마토그래피로 분리(分離)되어지는 탄닌을 연속적으로 분석(分析)할 수 있는 장점(長點)을 가진다.

• Journal of the Korean Wood Science and Technology
• /
• 제20권1호
• /
• pp.5-14
• /
• 1992

Experimental external collector type solar lumber dryer of $1m^3$ of maximum capacity with $1.6m^3$ of collector area was designed and constructed. The seasonal performance of solar dryer, including air-conditions, energy efficiency, and drying characteristics of 3cm-thick red pine and douglas-fir lumber was investigated. Also, the economic analysis was carried out. Annual average solar drying rate was about 2 times faster than air-drying rate with no significant difference in the amount of drying defects. But in initial drying stage air-drying rate in winter was much faster and those in spring and autumn were slightly slower than solar drying rate in each season. Annual average energy efficiency of solar-dryer and-collector was 25% and 57%, respectively. Fuel savings were over 50% at 15% of energy inflation rate and the payback period was estimated as 6.10 years at 30% of energy inflation rate.

• Journal of the Korean Wood Science and Technology
• /
• 제20권2호
• /
• pp.23-30
• /
• 1992

An experimental external external collector type, solar dehumidification dryer was retrofitted with a simple computer-based control system. Solar, solar-dehumidification, and air-drying of 3cm-thick douglas-fir were carried out to investigate the drying-conditions and characteristics of this system, and to analyze the energy efficiencies of each drying met hods in summer. The drying rate of solar-dehumidification was 12%/day, which was about 2 times and 3 times faster than that of solar-and air-drying, respectively. The amount of diurnal temperature fluctuation inside the solar-dryer was greatly reduced and the energy efficiency was enhanced from 25% to 60% by the dehumidifier.

• Journal of the Korean Wood Science and Technology
• /
• 제9권3호
• /
• pp.24-30
• /
• 1981

This experiment was carried out to determine the drying time from green to oven dry and estimate the moisture content of wood, such as red lauan (Shorea Spp.), Douglas fir (Pseudotsuga menziesii), Birch (Betula platyphylla), and oak (Quercus aliena), at various thickness, paralleled to fiber, of specimen for M.C. by oven dry method (100-105$^{\circ}C$). The results obtained are summarized as follows: 1. The drying time from green to oven dry decreases as the thickness of specimen for M.C. becomes to be thined, and that time at 10mm thickness are 14 hrs, for birch wood and 24 hrs, for oak wood. 2. The relative formulae between thickness (X) of specimen for M.C. and drying lime (Y) from 12% to oven dry are showed in Fig. 3. 3. The M.C. based on the weight of specimen for M.C. at t% can be obtained from the formula (2), and the drying time to 1% are shorter than that time to oven dry by approximately three times.

• Current Research on Agriculture and Life Sciences
• /
• 제32권3호
• /
• pp.131-134
• /
• 2014

The thermal death kinetics of the Black timber bark beetle, Xylosandrus germanus, was investigated to develop a heat treatment for control of infested wood packing materials used to export goods. To determine the feasibility of microwave irradiation as an alternative control method, laboratory experiments irradiating wooden blocks of Douglas fir ($200{\times}200{\times}250mm$), which were artificially infested with adults, with 2.45 GHz of microwave energy. All (100%) Ambrosia beetle adults were killed by both hot water treatments and microwave irradiation at $52^{\circ}C$ and $58^{\circ}C$, respectively. Probit analyses estimated the internal wood temperature required to produce Probit (0.99) efficacy to be $64.7^{\circ}C$ (95% CI $62.4-69.9^{\circ}C$) at one minute after microwave treatment.