• Journal of Korean Society on Water Environment
• /
• v.22 no.2
• /
• pp.258-263
• /
• 2006

ANAMMOX (Anaerobic ammonium oxidation) reactor, which was cultivated ANAMMOX bacteria in mesophilic condition ($35^{\circ}C$), was operated to investigate the effects of temperature. In $20{\sim}30^{\circ}C$ of operation condition, which was assumed as field-temperature, total N removal and $NH_4-N$ removal rate were declined from about 2.50 and $1.27kg\;N/{m^3}_{reactor}-day$ (0.06 and 0.03 kg N/kgVSS/day) to 1.62 and $0.41kg\;N/{m^3}_{reactor}-day$ (0.04 and 0.01 kg N/kgVSS/day), In this range of temperature, ANAMMOX had very low activities but acid fermentation bacteria and denitrifiers, which were competitors of substrates, had high activities relatively. Though operation temperature was higher than inhibition condition for two months, ANAMMOX activities could not been recovered once they were inhibited by low temperature. This fact was resulted from very slow doubling time of ANAMMOX bacteria. This study shows that maintenance device of optimal temperature is necessary required in field application of ANAMMOX.

• Fashion & Textile Research Journal
• /
• v.5 no.4
• /
• pp.408-412
• /
• 2003

The micro structure of POY was modified and a wool-like touch yarn of composite fibers with different shrinkage was made. With this yarn 12 different fabrics with wool like touch were prepared. The characteristic physical property changes of the fabrics examined are as follows: 1. In all cases, the initial high shrinkage stages were observed in hot water treatment and the 3D images of complex multilayer of typical doubling fibers with different shrinkage were also observed in hot air treatment of 170C. 2. The tensile strength changes of satin and plain fabrics with the change of twist count showed similar behavior. However, WT's were slightly higher and RT's was lower in twill and satin fabrics than those in plain fabric. 3. Since a slight decrease of B's of twill fabric found with increasing twist count under given experimental condition, it could be influenced on the anti-drape stiffness was decreased and flexibility was increased. 4. A significant decrease of G values was observed in the twist count 800-1000 T.P.M However, in the twist count higher than 1000 T.P.M G values observed were kept nearly constant. 5. MIU of plain and twill fabrics showed a drastic decrease at the twist count higher than 1000 T.P.M.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.88-89
• /
• 2000

The properties for self-frequency doubling (SFD) is unique phenomena for a small number of special single crystals. It is known that there are serious limitations to vary the concentration of active ions, for example high doping of active ions from 1 to 50 atomic %, in nonlinear materials. Until now, the Nd:YAl$_3$(BO$_3$)$_4$ (YAB) and Nd:(Ce,Gd)Sc$_3$(BO$_3$)$_4$ (CSB) crystals with high doping rates are well studied for the application of SFD purpose. They have much useful SFD properties, but also have big problems in crystal growth. In case of YAB crystal, it can be grown by solution melt method with very low growth rates and easy occurrence of inclusions. In case of CSB crystal, it has optically heterogeneity problems because of disarrangement of ions in huntite structure [1]. These problems make above crystals not so attractive for optical applications. Some popular nonlinear materials, such as LiNbO$_3$(LN), KTiOPO$_4$(KTP), LiB$_3$O$_{5}$ (LBO) crystals, are impossible to substitute by Rare Earth activators because of their crystallo-chemical problems of structure. When we dope active ions with the requisite concentrations for laser generation, it results in decreasing of optical quality of crystals or destroying of acentrosymmetric structure. (omitted)d)

• Journal of Korean Society of Rural Planning
• /
• v.24 no.2
• /
• pp.21-29
• /
• 2018

Riparian management has become important as stream water quality as well as riparian ecosystem gain more public attentions. The objective of this study was to determine riparian widths based on the functions of nutrient removal and wildlife habitat protection and to apply for the Jinwee stream area as a preliminary case. Nitrogen and phosphorus filtration efficiencies were considered in water quality aspect, while the habitat radii of amphibian and reptiles were used for wildlife conservation purpose. In addition, observation of endangered species and human impact on wildlife disturbance in riparian area were also taken into account in determining riparian widths. The stream confluence zone was emphasized by doubling the riparian widths as the focal point for wildlife habitat conservation. As the results, three different levels of riparian widths were proposed depending on the major riparian functions and applied to the Jinwee stream section as the case study. The proposed method can be used to determine riparian width in other stream areas based on different functional focus, ie, water quality or riparian conservation purposes.

• 한국가시화정보학회:학술대회논문집
• /
• 2004.12a
• /
• pp.147-155
• /
• 2004

Self-excited noise generation from laminar flames in thin annular jets of methane/air premixture has been investigated experimentally. Various flames were observed in this flow configuration, including conical shape flames, ring shape flames, steady crown shape flames, and oscillating crown shape flames. Self-excited noise with the total sound pressure level of about 70dB was generated from the oscillating crown shape flames for the equivalence ratio larger than 0.95. Sound pressure and $CH^*$ chemiluminescence were measured by using a microphone and a photomultiplier tube. The frequency of generated noise was measured as functions of equivalence ratio and premixture velocity. A frequency doubling phenomena have also been observed. The flame shape during flame oscillation was reconfirmed by a synchronized PIV experiment. The velocity and pressure field were obtained from PIV. The minimum pressure was formed near the edge of flame representing circulation. By comparing the results of sound pressure, flame luminosity and PIV, the noise source can be attributed to the flame front fluctuation near the edge of the oscillating crown-shape flames.

• Water Engineering Research
• /
• v.1 no.4
• /
• pp.267-277
• /
• 2000

This study reports an examination of the sensitivity of water resources in the Keum River basin to climate change. Assuming a doubling in $CO_2$ concentrations, a cooperative study provided four climate change scenarios for this study, which have been translated into temperature and precipitation scenarios on a basin scale. The study utilized these temperature and precipitation data for each climate change scenario as inputs to the NWS-PC model to generate the corresponding streamflow scenario over the Keum River basin. A reservoir simulation model for the Dae-Chung Dam in the Keum River basin has been developed with an object-oriented simulation environment, STELLA. For each streamflow scenario, the performance of the reservoir was assessed in terms of reliability, resiliency, and vulnerability. Although the simulation results are heavily dependent on the choice of the climate change scenarios, the following conclusions can be clearly concluded: (1) the future streamflow over the Dae-Chung Dam tends to decease during the dry period, which seriously increases competitive water use issues and (2) flood control issues predominate under the $2CO_2$-High case.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.2
• /
• pp.92-96
• /
• 2010

Deinterlacing methods are usually divided into inter-field deinterlacing and intra-field deinterlacing. The most common method of intra-field deinterlacing is the linear method which uses line doubling or line averaging. There are also some edge-enhancement methods such as ELA(Edge Based Line Average) and modified ELA. However, the linear interpolation generates edge blurring or staircase artifacts. The methods using ELA or modified ELA show poor deinterlacing at various types of edges because of insufficient edge information in a certain direction. This paper presents an intra-field deinterlacing algorithm that considers the interpolation based on edges in 7 directions and an edge line in the horizontal direction. It demonstrates better picture quality by reducing the staircase phenomenon of object in the conventional methods.

• Fisheries and Aquatic Sciences
• /
• v.16 no.3
• /
• pp.177-185
• /
• 2013

The development of species-specific fish cell lines has become a valuable tool for biological research. In recent years, marine medaka Oryzias dancena has been recognized as a good experimental model fish but there are no reports of establishment of cell lines from this fish. In this study, two cell lines from O. dancena blastula embryos were established from 41 total trials (4.9%). The two cell lines displayed typical in vitro morphology and have been cultured for >121 passages, which corresponds to 293 days. The doubling times of the cell lines were 29.84 and 28.59 h, respectively, and both possessed the potential to expand in a clonal manner, albeit with significant differences between the two cell lines. The absence of any of the four main medium supplements; i.e., fish serum, fetal bovine serum, basic fibroblast growth factor, and medaka embryo extract, significantly inhibited growth. The proportion of cells possessing normal chromosome number was 45% and 46.7% of the cell lines, respectively. Taken together, two cell lines that proliferate continuously were established from marine medaka and these cell lines may provide a basic tool for characterizing the unique features of this fish species.

• Fibers and Polymers
• /
• v.6 no.1
• /
• pp.66-71
• /
• 2005

The surface evenness and texture are closely related with the irregularity of yam thickness. Besides, yam thickness variation has an important role to influence the yam performance and the textile process efficiency. Thus, the information not only on the yam thickness, but also on the short- term irregular characteristics that have not been known before is required for enhancing the qualities of textile products. This paper reports the results of a study about the yam thickness and its variation for various types of yam on the basis of a new measurement system applying a laser slit beam as a light source. The new method delivers effective information on the irregularity. The analysis of the measured signal confirms that the visual shade created by the yam doubling and twisting can be measured and the yam thickness characteristics can be represented by corre­lograms. Depending on yam types, correlograms have different shapes and can be approximated to an exponentially decaying function with or without fluctuating magnitude. In addition, the effective information on the yam irregularity can be influ­enced by the sampling length interval of the measuring device used for tests.

• Journal of the Korean Geosynthetics Society
• /
• v.2 no.1
• /
• pp.15-25
• /
• 2003

This paper presents the results of instrumentation of a two-level of soil-reinforced segmental retaining wall. Instrumentation items include the lateral wall displacements and the geogrid strains at several locations. The instrumentation is still long carried in order to examine long-term behavior. The result indicate that the upper wall has a significant effect on the behavior of the lower wall doubling the wall moved. The wall also exhibits significant post-construction movements that had ceased several months after the wall completed. The implication of the findings from this study was discussed in great detail.