• 한국항행학회논문지
• /
• 제6권3호
• /
• pp.251-257
• /
• 2002

본 논문에서는 편파 다이버시티 특성을 갖는 이중 편파(Dual-Polarization) 방식의 IMT-2000)(1.885 GHz~2.17 GHz) 기지국용 안테나에 사용할 수 있도록 기존 Folded Dipole 안테나의 특성을 개선하였다. 제작된 안테나는 PCB 기판에 폴디드 다이폴 안테나 구조에 적층 형태를 갖는 마이크로 스트립 안테나로서 각 단자별 반사계수가 -20 dB 이하, 이중 편파 구조에서 중요한 규격인 단자간 분리도는 -20 dB를 가지며, 이득은 전 대역에서 약 7 dBi 이상의 특성을 보였다.

• Computers and Concrete
• /
• 제5권6호
• /
• pp.509-524
• /
• 2008

Containment structures not only are leak-tight barriers, but also may be subjected to impacts caused by tornado-generated projectiles, aircraft crashes or the fragments of missile warhead. This paper presents the results of an experimental study of the impact resistance of steel fiber-reinforced concrete against 45 g projectiles at velocity around 2500 m/s. An explosively formed projectile (EFP) was designed to generate an equivalent missile fragment. The formation and velocity of EFP are measured by flash x-ray. A switch made of double-layered thin copper sheets controlled the exposure time of each flash x-ray. The influence of the fiber volume fraction on the crater diameter of concrete slab and the residual velocity of the projectile were studied. The residual velocity of the projectile decreased as the fiber volume fractions increased. In this work, the residual velocity of the projectile was to 44% that of plain concrete when the fiber volume fraction exceeded 1.5%. Based on the present finding, steel fiber reinforced concrete with the fiber volume fraction exceeding 1.5% appear to be more efficient in protection against high velocity fragment impact.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.313-313
• /
• 2006

In this study, we describe a new double layered nanoporous membrane suitable for virus filtration. One layer is an 80 nm thick film having cylindrical pores with diameters of 15 nm and a narrow pore size distribution. This layer is prepared by using a thin film of the mixture of a block copolymer and a homopolymer, and mainly acts to separate viruses. The support layer (${\sim}150\;microns\;thick$) is a conventional micro-filtration membrane with a broad pore size distribution. This asymmetric membrane showed very high selectivity and flux for the separation of human rhinovirus type 14 (HRV 14) which has a diameter of ${\sim}30\;nm$ and is a major pathogen of the common cold in humans.

• Nuclear Engineering and Technology
• /
• 제21권4호
• /
• pp.267-276
• /
• 1989

중저준위 방사성 폐기물 처분 안전성 평가에 이용될 수 있는 유한 차분법에 의한 수치모델을 개발하였다. 이 모델은 처분장이 암반내에 위치한 경우에 대하여 처분장 주위 지하 암반 매질에서의 핵종의 이동을 기술하는 것으로 암반내의 단일한 균열으로의 지하수에 의한 이동과 균열에 수직한 방향으로의 확산을 고려하여 일차원적으로 해석하였다. 수치모델은 해석해와 병행하여 처분장 안전성 평가에 있어서 유용하게 이용될 수 있는 것으로 보다 실제적인 경계조건을 사용할 수 있게 하고, 불균질한 암반매질에 대해 다중매질 모델링을 제공한다. 수치모델의 검증을 위하여 균열에서의 Sr-90 농도 Profile을 구하여 해석해와 비교하였고, 몇몇 경계 조건에 따른 영향을 비교하고 암반매질을 파라미터 값이 단계적으로 변하는 이중 매질에 대하여 확장하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.828-837
• /
• 2006

Geotextiles consist of three major types of geosynthetic material (woven, non-woven and composite) and the functions of geotextiles are separation, reinforcement, filtration, drainage and as a moisture barrier. Although the many research scholar and engineer developed and established the design criteria and construction methodology, sustainable research still needed for optimum design methodology to the complicate field conditions. In this study, in-situ rainfall test performed to develop suitable filter system for sea dyke upper slope filter layer. In-situ rainfall test conducted for seven different filter system and measured the infiltration flux and pore pressure at various filter layer. Based on the test results, the double layered geotextile filter and sand transition system is most suitable for sea dyke upper filter layer because which system is effective for drainage of infiltration flow and minimize the deformation of sea dyke cover stone.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1174-1177
• /
• 2006

A bottom contact organic thin film transistor (OTFT) is fabricated with an organic double-layered gate insulator (GI) and pentacene. The PMMA and MNB layers are treated on gate insulator and source/drain (S/D, Au) before depositing pentacene to investigate device properties and pentacene growth. The sequence of surface treatment affects a device performance seriously. The ultra-thin PMMA (below 50A) was deposited on organic gate insulator and S/D metal by spin coating method, which showed no deterioration of on-state current (Ion) although bottom contact structure was exploited. We proposed that the reason of no contact resistance (Rc) increase may be due to a wettability difference in between PMMA / Au and PMMA / organic GI. As a result, the device treated by $PMMA\;{\rightarrow}\;MNB$ showed much better Ion behavior than those fabricated by $MNB\;{\rightarrow}\;PMMA$. We will report the important physical and electrical performance difference associated with surface treatment sequence.

• 대한토목학회논문집
• /
• 제36권2호
• /
• pp.191-196
• /
• 2016

파동의 에돌이와 공명식 머플러 원리를 이용하여 통풍형 방음을 구현하고 그 이론을 설명하였다. 이 방음기술은 차단하고자 하는 주파수영역의 선택이 가능하다. 방음벽을 이중으로 만들고 그 사이를 비워, 방음벽의 구멍을 통해 들어온 음파가 내부에서 공진하여 소멸되도록 하였다. 두께 8cm인 공진통마다 직경 5cm의 공기구멍을 2개씩 뚫고 실험한 결과 넓은 주파수영역대서 평균 25dB정도의 차음효과가 있었다. 일본 컴넥스사의 산란에 의한 투과손실만 있는 경우와의 차음효과를 비교한 결과 같은 통풍능력인 경우에 적어도 10dB이상 차음효과가 높았다. 또한 컴넥스사의 기술은 차음주파수 영역을 선택할 수 없다는 한계가 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.13-14
• /
• 2016

In the modern construction industry, since numerous skyscrapers have been built, there have been sought for developing various kinds of methods for shortening a construction period. Therefore, many kinds of studies on some kinds of cold-weather concrete have been conducted actively for the purpose of a year-round construction. Accordingly, this research team once developed a double-layered bubble sheet as a surface-coated curing material for winter. And there have been raised some worries that some initial damages to frozen concrete caused by low temperature of reinforcing bars which are exposed out of the wall areas of a wall-type apartment during winter. Therefore, in this study, it is intended to find out clearly whether it is possible for concrete to be damaged initially or not by analyzing the temperature characteristics of the exposed reinforcing bars of the wall areas under the temperature conditions during winter.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.847-850
• /
• 1996

The bi-layered films composed of Co-Cr-Ta layers and paramagnetic $Co_{67}Cr_{33}$ underlayer were deposited by suing Facing Targets Sputtering(FTS). The effects of $Co_{67}Cr_{33}$ underlayer on the crystallographic and magnetic characteristics of the Co-Cr-Ta layer deposited on the underlayer was investigated. The diffraction intensity $I_{p(002)}$ of Co-Cr-Ta layers on the $Co_{67}Cr_{33}$ layer was stronger than that of single layer and Co-Cr-Ta/Ti double layer. Therefore, the crystallinity of Co-Cr-Ta layer was imporved by the $Co_{67}Cr_{33}$ underlayer rather than Ti ones. However, te coercivity H$_{c\bot}$ of Co-Cr-Ta layers deposited on $Co_{67}Cr_{33}$ underlayer was as low as 250 Oe even at substrate temperature of $220^{\circ}C$. This H$_{c\bot}$ decrease seems to be attributed to the effect of the $Co_{67}Cr_{33}$ underlayer as well as interval time between deposition of the underlayer and the Co-Cr-Ta layer.

• 펄프종이기술
• /
• 제47권2호
• /
• pp.9-16
• /
• 2015

High loading of base paper is regarded as one of reasons to aggravate fold cracking of coated paper. But the relationship between the ash content of base paper and fold cracking of coated paper has not been shown yet. We investigated the effect of ash content in base paper on the fold cracking of coated paper. Handsheets with three different ash contents (19.5-23.5%) were prepared, and double layered coating were applied on the top side of the handsheets. A gravimetric water retention meter (AA-GWR) was employed to fold the paper with a uniform pressure after solid printing on the coated surface. The fold cracking was digitized by calculating the cracked area by means of an image analysis technique. Results suggested that high ash content in the base paper increased the fold cracking of the outer surface of coated papers. In the case of inner surface greater fold crack areas were obtained, and the number of cracks decreased because long and wide cracks were formed. Reduction in tensile strength and thickness appeared to give greater fold cracking for highly loaded papers.