• Journal of the Korea Concrete Institute
• /
• v.18 no.2 s.92
• /
• pp.169-176
• /
• 2006

Prestressed composite girder with concrete infilled steel tubes(PSC-CFT girder) is new type of bridge girder which enhances the resisting capacities due to the double composite action of PSC composite girder and concrete infilled tube. The flexural behaviors of PSC-CFT girder in the negative moment regions are investigated based on the experimental observations recently performed on two of 3.6m long specimens. The mechanical and structural roles and failure mechanism of the composite action are discussed through comparing the test results with those numerically predicted by the three methods of one and three-dimensional nonlinear finite element analysis, and section analysis method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.3
• /
• pp.380-390
• /
• 1993

Effect of interfacial electrical conditions on adhesion of ${\alpha}-Fe_2O_3$ particles to PET fabric and the removal of ${\alpha}-Fe_2O_3$ particles from PET fabric, were investigated as functions of pH, electrolyte and ionic strength. The ${\zeta}$ potential of PET fiber and ${\alpha}-Fe_2O_3$ particles in the electrolyte solution were measured by streaming potential and microelectrophoresis methods respectively. The potential energy of interaction between ${\alpha}-Fe_2O_3$ particles and PET fabric were calculated by using the heterocoagulation theory for a sphere-plate model. The negative ${\zeta}$ potential of ${\alpha}-Fe_2O_3$ particle and PET fiber increased with pH, and then decreased certain pH and isoelectric points of ${\alpha}-Fe_2O_3$ particles and PET fiber were pH 6.5 and pH 3.5, respectively. The negative ${\zeta}$ potential of ${\alpha}-Fe_2O_3$ particle and PET fiber affected by electrolytes, were relatively high with polyanion electrolytes in solutions and were low with neutral salts. However, at surfactant solution, ${\zeta}$ potential was levelled off. The influence of the ionic strength on the ${\zeta}$ potential of ${\alpha}-Fe_2O_3$ particle was small but the negative ${\zeta}$ potential of PET fiber increased with the ionic strength. In the presence of anionic surfactant, the ${\zeta}$ potential of ${\alpha}-Fe_2O_3$ particle and PET fiber increased regardless of solution conditions. The interaction energy between ${\alpha}-Fe_2O_3$ particle and PET fabric increased with pH. The interaction energy was relatively high with polyanion electrolytes in solution, and the influence of ionic strength on the interaction energy was small, and the effective thickness of electrical double layer increased with decreasing the ionic strength.

• Journal of Families and Better Life
• /
• v.26 no.2
• /
• pp.13-24
• /
• 2008

The aim of the present study was to develop a cognitive-behavioral group therapy program for social anxiety in Korean adolescents and to examine its efficacy through pre-, post- and 2-year follow-up tests. The program included cognitive restructuring, exposure training and social skills training. KSAS-A and SASC-R were administered to 588 1st grade middle-school female students to assess their social anxiety levels. On the basis of double criteria procedure(top 10% scores on both scales), 59 students were selected initially. Individuals currently receiving clinical treatment were excluded. Finally, 40 students were selected and randomly assigned to either a treatment group or a wait-list control group. The program consisted of 12 weekly sessions, approximately 1.5-2 hours in duration. Whereas pre- and post-tests were administered to both groups, follow-up tests were administered to the treatment group only. The collected data were statistically analyzed through independent t-test and paired t-test. The results of the study were as follows: 1) At post-test students in the treatment group showed a very significant reduction in social anxiety and fear of negative evaluation by others in comparison with those in the wait-list group. 2) At post-test students in the treatment group showed a significant reduction in negative automatic thoughts in comparison with those in the wait-list group. 3) At post-test students in the treatment group showed a significant improvement in overall social skills in comparison with those in the wait-list group. 4) At post-test students in the wait-list group showed a significant increase in both social anxiety and negative automatic thoughts in comparison with those in the treatment group. 5) At 3-month, 1-year and 2-year follow-ups, the program's effectiveness was maintained.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.311-311
• /
• 2016

최근 고성능 디스플레이 개발이 요구되면서 기존 비정질 실리콘(a-Si)을 대체할 산화물 반도체에 대한 연구 관심이 급증하고 있다. 여러 종류의 산화물 반도체 중 a-IGZO (amorphous indium-gallium-zinc oxide)가 높은 전계효과 이동도, 저온 공정, 넓은 밴드갭으로 인한 투명성 등의 장점을 가지며 가장 연구가 활발하게 보고되고 있다. 기존에는 SG(단일 게이트) TFT가 주로 제작 되었지만 본 연구에서는 DG(이중 게이트) 구조를 적용하여 고성능의 a-IGZO 기반 박막 트랜지스터(TFT)를 구현하였다. SG mode에서는 하나의 게이트가 채널 전체 영역을 제어하지만, double gate mode에서는 상, 하부 두 개의 게이트가 동시에 채널 영역을 제어하기 때문에 채널층의 형성이 빠르게 이루어지고, 이는 TFT 스위칭 속도를 향상시킨다. 또한, 상호 모듈레이션 효과로 인해 S.S(subthreshold swing)값이 낮아질 뿐만 아니라, 상(TG), 하부 게이트(BG) 절연막의 계면 산란 현상이 줄어들기 때문에 이동도가 향상되고 누설전류 감소 및 안정성이 향상되는 효과를 얻을 수 있다. Dual gate mode로 동작을 시키면, TG(BG)에는 일정한 positive(or negative)전압을 인가하면서 BG(TG)에 전압을 가해주게 된다. 이 때, 소자의 채널층은 depletion(or enhancement) mode로 동작하여 다른 전기적인 특성에는 영향을 미치지 않으면서 문턱 전압을 쉽게 조절 할 수 있는 장점도 있다. 제작된 소자는 p-type bulk silicon 위에 thermal SiO2 산화막이 100 nm 형성된 기판을 사용하였다. 표준 RCA 클리닝을 진행한 후 BG 형성을 위해 150 nm 두께의 ITO를 증착하고, BG 절연막으로 두께의 SiO2를 300 nm 증착하였다. 이 후, 채널층 형성을 위하여 50 nm 두께의 a-IGZO를 증착하였고, 소스/드레인(S/D) 전극은 BG와 동일한 조건으로 ITO 100 nm를 증착하였다. TG 절연막은 BG 절연막과 동일한 조건에서 SiO2를 50 nm 증착하였다. TG는 S/D 증착 조건과 동일한 조건에서, 150 nm 두께로 증착 하였다. 전극 물질과, 절연막 물질은 모두 RF magnetron sputter를 이용하여 증착되었고, 또한 모든 patterning 과정은 표준 photolithography, wet etching, lift-off 공정을 통하여 이루어졌다. 후속 열처리 공정으로 퍼니스에서 질소 가스 분위기, $300^{\circ}C$ 온도에서 30 분 동안 진행하였다. 결과적으로 $9.06cm2/V{\cdot}s$, 255.7 mV/dec, $1.8{\times}106$의 전계효과 이동도, S.S, on-off ratio값을 갖는 SG와 비교하여 double gate mode에서는 $51.3cm2/V{\cdot}s$, 110.7 mV/dec, $3.2{\times}108$의 값을 나타내며 훌륭한 전기적 특성을 보였고, dual gate mode에서는 약 5.22의 coupling ratio를 나타내었다. 따라서 산화물 반도체 a-IGZO TFT의 이중게이트 구조는 우수한 전기적 특성을 나타내며 차세대 디스플레이 시장에서 훌륭한 역할을 할 것으로 기대된다.

• Journal of the HCI Society of Korea
• /
• v.9 no.1
• /
• pp.1-9
• /
• 2014

Use of smart phones and other means allowed ready access to social networking service (SNS) and its users have explosively increased. In the meantime, Facebook which has the largest user community has caused various social problems due to its conservative privacy policy; yet its users are continuously increasing and committed to the service although its privacy policy has not so much changed. In this research, we studied the irony of increasing popularity of Facebook despite its negative privacy policy in the light of its users' double-sided desire. That is, users use Facebook because they are curious about other users' personal information and activities although they are at the same time anxious about public exposure of their own personal information and activities. To test this conjecture, we investigated users' double-sided desire (privacy protection, viewing others' activities) using questionnaire and reverse scenario test and confirmed that proper balance of privacy protection and activity exposure is an important contributor to continued popularity of Facebook. Much research studied SNS focusing on self-presentation that is on the side of self-exposure. This research highlights the importance of balance keeping between hide-and-seek for SNS companies such as Facebook in the use of privacy policy.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.6
• /
• pp.737-749
• /
• 2007

Flexural design of double composite box girder over the interior pier for three-span continuous bridge was performed by the LRFD method. The maximum span length of the continuous bridge ranged from 80m to 120m and the relative ratio of the span length was assumed to be 1:1.25:1. The girder section was designed for the strength limit state and service limit state with additional design check for constructibility. Before the bottom concrete and compression flange showed a complete composite action, the buckling of lower compression flange was checked. The flexural stiffness and flexural resistance characteristics for the section and for the constituent members such as tension flange, compression flange, and web were analyzed for different thicknesses of the bottom concrete on top of the compression flange. The effect of the distribution ratio of steel between the top and bottom flanges was investigated by analyzing ductility behavior and stress distribution through the girder's depth for several different relative area ratios of steel between the top and bottom flanges. It was found that a total amount of 15% of steel can be saved by applying the double composite system compared with that of the conventional composite system.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.8
• /
• pp.873-878
• /
• 2012

Putting a conductive rod between rotating axial electrodynamic wheels composed of repetitive permanent magnets, three-axial magnetic forces generate on the conductive rod. It is possible to levitate and transfer the rod on space with the forces. However, the forces vary in direction and magnitude for a position of the rod between the electrodynamic wheels. Thus, the position influences the stability of the rod also. To guarantee the stability of a levitated object, the force acting on the object should have negative stiffness like a spring. So, we analyze the stable operating range of the conductive rod levitated by the axial wheels with the commercial finite element tool in this paper. Specially, as the pole number and the radial width of permanent magnets has much influence on the generated force and thereby the stable region, their sensitivities are analyzed also. The analytic result is compared with experimental result.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.113-115
• /
• 2008

At the high speed operation, the high demagnetization voltage can reduce the negative torque, so the output power and efficiency can be improved. In this paper, a novel power converter for single phase SRM with high demagnetization voltage is proposed. A simple passive capacitor circuit is added in the front-end, which consists of three diodes and one capacitor. Based on this passive network, the two capacitors can be connected in series and parallel, so the phase winding of SRM obtains general do-link voltage in excitation mode and the double dc-link voltage in demagnetization mode. The operation modes of the proposed converter are analyzed in detail. Some computer simulation results is done to verify the performance of proposed converter.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.459-461
• /
• 1994

This paper proposed a new converter topology improving the split source type converter. In this converter. two switches and six diodes add to the split source type converter. The proposed converter has a performance minimized a negative torqe, putting a phase current off by double impressed voltage 2Vdc. Hence, a new converter results in increase of the average output power and improves converter efficiency in heavy load and high speed. Theoretical prediction is verified by experimental results got with a new proposed converter and 8/6 poles SRM.

• Korean Journal of Human Ecology
• /
• v.17 no.3
• /
• pp.457-467
• /
• 2008

The purpose is to explore elementary students' attitudes towards money and the effects of parents' educational involvement on children's economic behaviors. The subjects are elementary students(N= 123) from first grade to sixth grade. The survey consists of question items of money ethics, attitudes towards money, consumer ethics, parents' attitudes toward economic education, and children's economic practices such as management of allowance, income, saving and savings account. The results are as follows: first, the elementary students show the double standard in attitudes to money, thinking of money as positively being important, at the same time, as being negative social value. Second, the parents play positive models in children's economic education. However, their efforts are not enough so that their children could have desirable economic habits. Therefore, economic education is first needed for the parents and then for children.