• 한국기계가공학회지
• /
• 제20권9호
• /
• pp.42-47
• /
• 2021

A one-touch descending lifeline that can easily be installed and rapidly evacuated in the event of a fire accident in high-rise buildings was proposed to overcome difficulties of conventional descending lifeline such as complex installation methods and procedures. However, this lifeline exhibits limitations such as restrictions in installation location and large apparatus size. Therefore, this paper proposes a sliding-type descending lifeline, which has a similar operation to that of current one-touch descending lifeline and solves the aforementioned limitations. A double square link mechanism including a sliding four-bar linkage is proposed and the descending lifeline support is redesigned to unfold in two different planes, allowing 3D movement. Additionally, the shape of the support frame is designed to obtain two attachment surfaces that can be attached to a wall, irrespective of the angle between the window and the inner wall. FEA analysis using ABAQUS is performed to ensure that the robustness of the presented support complies with the Fire Control Act Enforcement Decree. Finally, the feasibility of the proposed sliding one-touch descending lifeline is verified through fabrication.

• 한국인터넷방송통신학회논문지
• /
• 제12권6호
• /
• pp.279-283
• /
• 2012

본 논문에서는 모바일용 터치 스크린에서 손가락이 닿는 부분의 좌표를 계산하여 출력하는 저전력 고속 터치 제어 회로를 설계하고 구현하였다. 시스템 클럭은 10MHz이고, 채널 수는 21개, 대기 상태 전류는 $20{\mu}A$ 이고, 다이나믹 레인지는 140pF ~ 400pF 이며, 응답 시간은 0.1ms/frame이다. 저전력을 위한 전력 관리 회로와 보드, 습도, 온도에 따른 자동 임피이던스 보정 기능과 주변 키 및 패턴 간섭 억제 기능 및 직렬 인터페이스 I2C, SPI 기능을 구현하였다. 설계된 제어 회로의 성능은 FPGA와 $0.18{\mu}m$ CMOS 표준 공정을 이용하여 측정하였다. 구현된 제어회로는 모바일 폰이나 스마트 리모트 컨트롤로에 응용할 수 있도록, 다이아몬드 형태를 이용한 2 레이어 ITO용 모듈과 원가절감을 위한 단일 레이어 ITO 모듈에 사용 가능하도록 설계하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권3호
• /
• pp.349-355
• /
• 2015

A fully-differential touch-screen sensing architecture is presented to improve noise immunity and also support most multi-touch events minimizing the number of amplifiers and their silicon area. A correlated double sampling function is incorporated to reduce DC offset and low-frequency noises, and a stabilizer circuit is also embedded to minimize inherent transient fluctuations. A prototype of the proposed readout circuit was fabricated in a $0.18{\mu}m$ CMOS process and its differential operation in response to various touch events was experimentally verified. With a 3.3 V supply, the current dissipation was 3.4 mA at normal operation and $140{\mu}A$ in standby mode.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.228.2-228.2
• /
• 2014

Characteristics of high Fermi velocity, high mechanical strength, and transparency offer tremendous advantages for using graphene as a promising transparent conducting material [1] in electronic devices. Although graphene is a prospective candidate for touch sensor with strong mechanical properties [2] and flexibility, only few investigations have been carried out in the field of sensor as a device form. In this study, we suggest ultra-highly sensitive and transparent graphene touch sensor fabricated by single layer graphenes. One of the graphene layers is formed in the top panel as a disconnected graphene beam transferred on PDMS, and the other of the graphene layer is formed with line-patterning on the bottom panel of triple structure PET/PI/SiO2. The touch sensor shows characteristics of flexible. Its transmittance is approximately 75% where transmittance of the top panel and the bottom panel are 86.3% and 87%, respectively, at 550 nm wavelength. Sheet resistance of each graphene layer is estimated as low as $971{\Omega}/sq$. The results show that the conductance change rate (${\Delta}C/C0$) is $8{\times}105$ which depicts ultra-high sensitivity. Moreover, reliability characteristic confirms consistent behavior up to a 100-cycle test.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.388-391
• /
• 2002

의류용 소재의 다양화와 소재의 복합화에 따라 최근 여러 가지의 합성섬유 관련소재가 선을 보이고 있다. 그 중 double covering two way 이질 복합사 제품은 high touch 및 fashion 용 차별용도의 최적소재를 도출하여 기존의 제품과는 차별화 할 수 있다는 점과, 기존 제품과는 그 물성이 전혀 다른 새로운 소재의 제품을 생산함에 따라 품질 고급화에 크게 기여할 수 있다는 점에서 그 중요성을 가지고 있다. (중략)

• Journal of Computational Design and Engineering
• /
• 제1권3호
• /
• pp.153-160
• /
• 2014

As smartphones came into wide use recently, it has become increasingly popular not only among young people, but among middle-aged people as well. Most smartphones adopt capacitive full touch screen, so touch commands are made by fingers unlike the PDAs in the past that use touch pens. In this case, a significant portion of the smartphone's screen is blocked by the finger so it is impossible to see the screens around the finger touching the screen; this causes difficulties in making precise inputs. To solve this problem, this research proposes a method of using simple AR markers to improve the interface of smartphones. A marker is placed in front of the smartphone camera. Then, the camera image of the marker is analyzed to determine the position of the marker as the position of the mouse cursor. This method can enable click, double-click, drag-and-drop used in PCs as well as touch, slide, long-touch-input in smartphones. Through this research, smartphone inputs can be made more precise and simple, and show the possibility of the application of a new concept of smartphone interface.

• 한국의류학회지
• /
• 제26권1호
• /
• pp.152-159
• /
• 2002

Neural networks are used to predict the sense of touch of polyurethane coated fabrics. In this study, we used the multi layer perceptron (MLP) neural networks in Neural Connection. The learning algorithm for neural networks is back-propagation algorithm. We used 29 polyurethane coated fabrics to train the neural networks and 4 samples to test the neural networks. Input variables are 17 mechanical properties measured with KES-FB system, and output variable is the sense of touch of polyurethane coated fabrics. The influence of MLF function, the number of hidden layers, and the number of hidden nodes on the prediction accuracy is investigated. The results were as follows: MLP function, the number of hidden layer and the number of hidden nodes have some influence on the prediction accuracy. In this work, tangent function, the architecture of the double hidden layers and the 24-12-hidden nodes has the best prediction accuracy with the lowest RMS error. Using the neural networks to predict the sense of touch of polyurethane coated fabrics has hotter prediction accuracy than regression approach used in our previous study.

• 한국CDE학회논문집
• /
• 제16권5호
• /
• pp.361-369
• /
• 2011

As smartphones came into wide use recently, it has become increasingly popular not only among young people, but middle-aged people as well. Most smartphones use capacitive full touch screen, so touch commands are made by fingers unlike the PDAs in the past that use touch pens. In this case, a significant portion of the smartphone's screen is blocked by the finger so it is impossible to see the screens around the finger touching the screen, and difficulty occurs in precise control used for small buttons such as qwerty keyboard. To solve this problem, this research proposes a method of using simple AR markers to improve the interface of smartphones. Sticker-form marker is attached to fingernails and placed in front of the smartphone camera Then, the camera image of the marker is analyzed to determine the orientation of the marker to perceive as onRelease() or onPress() of the mouse depending on the marker's angle of rotation, and use its position as the position of the mouse cursor. This method can enable click, double-click, drag-and-drop used in PCs as well as touch, slide, long-touch-input in smartphones. Through this research, smartphone inputs can be made more precise and simple, and show the possibility of the application of a new concept of smartphone interface.

• 한국기계가공학회지
• /
• 제20권6호
• /
• pp.108-113
• /
• 2021

Recently, a new concept of a one-touch descending lifeline has been proposed to address the drawbacks of the conventional descending lifeline, which can be easily installed and quickly evacuated in the case of a fire emergency. All separate parts for escape are initially mounted in a box, and the link-type support is spread out of the window by pushing the handle attached to the box. In this study, the proposed double square linkage mechanism was redesigned, and its safety is verified by determining an appropriate moment of inertia of the link through finite element analysis using Abaqus. The shape and assembling method of the reel and speed controller were also modified such that the safety belt was simultaneously unfolded with link-type support. Finally, the feasibility of the proposed one-touch all-in-one descending lifeline was confirmed through fabrication.

• 융합정보논문지
• /
• 제12권3호
• /
• pp.38-45
• /
• 2022

핀테크 기술의 발전으로 인해 스마트폰을 이용한 금융거래가 활성화되고 있다. 금융거래시 사용자 인증을 위한 비밀번호는 스마트 폰의 터치 스크린 상에 보여지는 가상 키패드를 통해 입력된다. 비밀번호를 터치할 때 공격자가 높은 해상도를 가진 카메라로 촬영하거나 어깨 너머로 훔쳐보는 방식으로 사용자가 입력한 비밀번호를 알아낼 수 있다. 이런 공격을 막기 위해 보안이 적용된 가상 키패드는 크기가 작은 터치 스크린에 입력하기 어렵고, 훔쳐보기 공격에 취약점이 여전히 존재한다. 본 논문에서는 전체 키패드를 몇 개의 그룹으로 나누고 작은 화면에 표시하여 입력할 문자가 속해 있는 그룹을 터치하고, 그룹 내에서 해당 문자를 터치하는 방식으로 입력할 문자를 쉽게 찾을 수 있다. 제안기법은 입력할 문자가 속한 그룹을 선택하며 해당 그룹에 키패드를 10개 이내로 작은 스크린에 보여주기 때문에 키패드의 크기를 기존 방법보다 2배 이상 확대가 가능하고, 위치를 랜덤하게 배치하여 터치한 위치를 통한 공격을 차단할 수 있다.