• 한국표면공학회지
• /
• 제37권4호
• /
• pp.215-219
• /
• 2004

We fabricated protein chip plates coated with silane carboxylate. The silane compound was immobilized by hydrogen bond and/or other chemical bonds on the surface of the plate. The plates were then prepared by binding $Ni^{2+}$ to surfaces terminated with silane carboxylate groups. The carboxylic acid surface was generated by chemical oxidation of the terminal double-bond functions of the silane-deposited layer. The $Ni^{2+}$ ions on the surface reacted readily to His-tagged proteins. A significant increase in His-tagged protein adsorption was achieved on the surface terminated with silane carboxylate with longer alkyl chain, suggesting better availability of these protein chip plates for proteomic studies.

• 마이크로전자및패키징학회지
• /
• 제6권2호
• /
• pp.1-12
• /
• 1999

Brown oxide and/or black oxide layers were formed on the surface of Cu-based leadframe by chemical oxidation of leadframe in hot alkaline solutions, and their growth characteristics were studied. Then, to measure the adhesion strength between leadframe and epoxy molding compound (EMC), oxidized leadframe samples were molded with EMC and machined to form sandwiched double-cantilever beam (SDCB) specimens and pull-out specimens, respectively. Results showed that the adhesion strength of un-oxidized leadframe/EMC interface was inherently very poor but could be increased drastically with the nucleation of acicular CuO precipitates on the surface of leadframe. The presence of smooth faceted $Cu_2O $ on the surfaces of leadframe gave close to zero interfacial fracture toughness (Gc) and reasonable pull strength (PS). A direct correlation between Gc and PS showed that PS can be a measure of Gc only in a limited range.

• International Journal of Automotive Technology
• /
• 제7권3호
• /
• pp.251-259
• /
• 2006

For practical application on the HCCI engine, the solution of subjects, such as control of auto-ignition timing and avoidance of knocking, is indispensable. This study focused on the technique of controlling HCCI combustion appropriately, changing the mixture ratio of two kinds of fuel. Methane and DME/n-Butane were selected as fuels. The influences, which the mixing ratio of two fuels does to ignition timing, ignition temperature, rate of heat release and oxidation reaction process, were investigated by experiment with 4-stroke HCCI engine and numerical calculation with elementary reactions.

• 한국안전학회지
• /
• 제11권4호
• /
• pp.84-89
• /
• 1996

The Oxidation of aflatoxin $G_1$ ($AFG_1$) with ozone in chloroform solvent gave the stable ozonide into ozonization of the double bond in the terminal furan ring, and this reaction have been carried out for 3hr at -78. 5$^{\circ}C$. The chloroform solvent was removed in a stream of nitrogen and the residue was separated by elution chromatography(EC). The structure of this compound have been identified by using MS, $^1H-NMR$, $^l3C-NMR$ and I. R spectroscopy, respectively. This compound was formed the normal stable AFG$_1$-ozonide into spontaneous rearrangement after unstable ozonide according to sigmatropic rearrange ment dependent upon cyclo addition by ozone.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.106-107
• /
• 2007

We fabricated anodic aluminium oxides (AAO) on Si and sapphire substrates from the electrochemical reactions of thin AI films in an aqueous solution of oxalic acid. The thin AI films have deposited on Si and Sapphire substructure by using E-beam evaporation and thermal evaporation, respectively. The formation of AAO structures has investigated from FE-SEM measurement image and showed randomly distributed phase of nanoholes instead of the periodic lattice of photonic crystals. The AAO structure on sapphire shows the double layers of nanoholes.

• 한국표면공학회지
• /
• 제33권4호
• /
• pp.241-250
• /
• 2000

Popcorn cracking phenomena frequently occur in thin plastic packages during the solder reflow process, which are definitely affected by poor adhesion of Cu-based leadframe to epoxy molding compounds (EMCs). In the present work, in order to enhance the adhesion strength, a brown-oxide treatment on the Cu-based leadframe was carried out and the adhesion strength of leadframe/EMC interface was measured in terms of fracture toughness by using sandwiched double-cantilever beam (SDCB) specimens. After the adhesion tests, fracture surfaces were analyzed by SEM, AES, EDS and AFM to make the failure path clear. Results showed that failure path was closely related to the oxidation time and the interfacial fracture toughness.

• 공업화학
• /
• 제18권3호
• /
• pp.291-295
• /
• 2007

전기화학적으로 용량이 큰 활물질을 얻기 위한 수단으로 니들 코크스를 $NaClO_3$과 70 wt%의 $HNO_3$으로 구성된 수용액을 이용하여 산화처리를 하였다. $NaClO_3$/니들 코크스의 질량비가 7.5배인 수용액에서 산화 처리한 결과, 니들 코크스는 산화흑연 구조로 상변이가 일어나고, 또한 산소의 함유량의 증가와 함께 층간거리는 $6.9{\AA}$으로 확대되었다. 한편, 산화 니들 코크스의 전기이중층 커패시터용 분극 전극으로서의 전기화학적 특성은 acetonitrile의 용매에 각각 1.2 M의 TEABF4 (tetraethylammonium tetrafluoroborate)와 $TEABF_4$ (triethylmethylammonium tetrafluoroborate)의 전해질이 함유된 유기용액을 각각 사용하여 조사하였다. 1.2 M $TEABF_4$/acetonitrile의 전해액을 사용한 커패시터 셀은 1.2 M $TEABF_4$/acetonitrile의 전해액을 사용한 커패시터 셀에 비해 전극저항은 $0.05{\Omega}$로 낮았고, 2 전극 기준으로 0~2.5 V에서 측정한 용량 및 부피 당 용량은 32.0 F/g와 25.5 F/mL으로 높은 수치를 나타내었다. 이러한 전기화학적 거동을 천연흑연 구조에서의 층간 거리와 전해질의 양이온 크기와의 상관관계로 논의하였다.

• 공업화학
• /
• 제2권3호
• /
• pp.262-269
• /
• 1991

${\beta}$-carotene의 오존산화반응을 통하여 불포화 색소물질에 대한 오존의 탈색효과와 반응성분의 변화를 정량적으로 비교하였으며, 카로티노이드계 색소가 주요 발색원인물질인 beeswax 에 대한 오존의 산화반응을 물, 0.5%와 1.0% 수산화나트륨수용액, 20% 와 95% 초산수용액에서 실시하여 각 반응계에 따른 탈색효과를 비교검토하였고, 과산화수소의 첨가효과도 검토하였다. ${\beta}$-carotene의 불포화이중결합의 감소와 탈색효과는 정량적으로 비례하였으며 beeswax의 탈색효과도 잘 일치하는 결과를 얻었다. Beeswax의 탈색효과는 1.0 % 수산화나트륨수용액에서 반응한 것이 가장 우수하였으며. 과산화수소의 첨가(왁스의 2%)시 390 nm 에서의 흡광도가 0.045 로 좋은 탈색효과를 얻을 수 있었다. Beeswax의 탈색에 있어 오존산화반응이 물리흡착보다 효과적이라는 결론을 얻을 수 있었다.

• Journal of Preventive Medicine and Public Health
• /
• 제5권1호
• /
• pp.43-48
• /
• 1972

5 bed sand filter, applying biological oxidation, was designed and studied on the treatment of water works. Never using any coagulant agent (drugs), which may cause water pollution in pre-treatment of head water, the auther attempt a high rate filtration by the microorganism (nitrofication bacteria) end plant which populate in multi layer sand beds. The result are as follows : In order to evaluate the oxygen effect on filtration, oxygen was injected in aeration tank attached to each filter tank while filtration, and $NH_3$ was tested as a representaiive ingredient. It was found out that the aeration method was more effective, with over 33% of $NH_3$ removal capacity, than the anerobic and this 5 bed filter showed double removal capacity of $NH_3$ by comparing with conventional sand bed (2 stage bed). According to the examination of two kind of head water, pre-treated with coagulant agent and activated carton, the filtration capacity was affected by the polluted condition of head water, resulting that lower value of pollution and slower velocity of filtration showed more efficiency of $NH_3$ removal. In this experiment $NH_3$ content tested in treated water had a fairly good correlation with others.

• Nuclear Engineering and Technology
• /
• 제52권3호
• /
• pp.597-609
• /
• 2020

Accident Tolerant Fuels have been widely studied since the Fukushima-Daiichi accident in 2011 as one of the options on how to further enhance the safety of nuclear power plants. Deposition of protective coatings on nuclear fuel claddings has been considered as a near-term concept that will reduce the high-temperature oxidation rate and enhance accidental tolerance of the cladding while providing additional benefits during normal operation and transients. This study focuses on experimental testing of Zr-based alloys coated with Cr-based coatings using Physical Vapour Deposition. The results of long-term corrosion tests, as well as tests simulating postulated accidents, are presented. Zr-1%Nb alloy used as nuclear fuel cladding serves as a substrate and Cr, CrN, Cr_xN_y layers are deposited by unbalanced magnetron sputtering and reactive magnetron sputtering. The deposition procedures are optimized in order to improve coating properties. Coated as well as reference uncoated samples were experimentally tested. The presented results include standard long-term corrosion tests at 360℃ in WWER water chemistry, burst (creep) tests and mainly single and double-sided high-temperature steam oxidation tests between 1000 and 1400℃ related to postulated Loss-of-coolant accident and Design extension conditions. Coated and reference samples were characterized pre- and post-testing using mechanical testing (microhardness, ring compression test), Thermal Evolved Gas Analysis analysis (hydrogen, oxygen concentration), optical microscopy, scanning electron microscopy (EDS, WDS, EBSD) and X-ray diffraction.