• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권1호
• /
• pp.46-52
• /
• 2009

The maxillary posterior edentulous region presents unique and challenging conditions in implant dentistry. The height of the posterior maxilla is reduced greatly as a result of dual resorption from the crest of the ridge and pneumatization of the maxillary sinus after the loss of teeth. Materials previously used for sinus floor grafting include autogenous bone, allogeneic bone, xenogenic bone and alloplastic materials. Autogenous bone is the material of choice, but its use is limited by donor-site morbidity, complications, sparse availability, uncontrolled resorption and marked volume loss. One way to overcome this problem would be to use bone substitutes alone as a osteoconductive scaffold for bone regeneration from the residual bone or in combination with allogeneic bone, which also has osteoinductive properties. The purpose of this article is to describe a double layers technique of demineralized and mineralized bone graft materials instead of autogenous bone in sinus floor augmentation of deficient posterior maxillary alveolar process and to report our experience with this technique. Our results show that maxillary sinus augmentation using mineralized and demineralized bone materials, when installed simultaneously with the implant or not, is good results for bone healing.

• 비파괴검사학회지
• /
• 제32권3호
• /
• pp.241-262
• /
• 2012

Some applications require structural health monitoring in inaccessible components. This paper presents a technique useful for Structural Health Monitoring of double wall structures, such as double wall steam pipes and double wall pressure vessels separated from an ultrasonic transducer by three layers. Detection has been demonstrated at distances in excess of one meter for a fixed transducer. The case presented here is for one of the layers, the middle layer, being a fluid. For certain transducer configurations the wave propagating in the fluid is a wave with low velocity and attenuation. The paper presents a model based on wave theory and finite element simulation; the experimental set-up and observations, and comparison between theory and experiment. The results provide a description of the technique, understanding of the phenomenon and its possible applications in Structural Health Monitoring.

• 한국실내디자인학회논문집
• /
• 제14권2호
• /
• pp.63-71
• /
• 2005

The dome structure has been treated in two layers among the techniques that have formed the space in Baroque architecture and the light used to be manipulated to create the openness of space and the fantasy of atmosphere. Such an expression technique has influenced on the expression of space in the architecture of New York Five in the 1960s to 1970s and the concept of multiple space embellished with various layers has appeared in the architectural concept of New York Five; meanwhile, the common meaning with the technique of double layers and the ways of phenomenal expressions that have recognized the existence of space in the Baroque period has been achieved through the light, immaterial organism. It means that the existing concept of light limited simply to the plane elements of brightness and darkness has been treated as a formative element that has defined and adjusted the visual expansion and reduction of the space Itself and special existence and has been used as an element of the media of spatial structure. In addition, these elements have been treated as another solution for the emotional aspects of space. Therefore, this study compares the plastic and formative meaning of the Baroque architecture with that of New York Five in terms of the relation between space and light and examines them; in doing so, it will give a clue to understand various and new space expression techniques to many architects and space designers who have led modern architecture.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.681-688
• /
• 2002

Study was peformed to develop the‘environmental double pile’for the remediation of low-permeable contaminated soil. This technique is similar in function to‘sand drain pile’But this applies recyclable oyster shell treated as waste materials to a drain material and the pile is consisted of two layers. Inner metal pile is located in center and oyster shells are filled around it. By this technology, contaminated ground water is pumped out through the oyster shell and purified by drainage, adsorption, and reaction processes. Afterwards, the grout material is injected through the inner pile for the effect of the solidification / stabilization. As a result, the concept of this technique is a development of one-step process technology. Through the test, a consolidation characteristic by radial drain is going to be evaluated and the optimum standard of this technology will be calculated.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.246.2-246.2
• /
• 2014

Green-light emitting OLED with single layer of Alq3 and orange-light emitting OLED with double layer of rubrene/Alq3 as EML were fabricated and characterized comparatively. The two OLED devices were based on an anode of ITO, HTL of TPD, and cathode of Al, respectively. The green light emitting OLED was then prepared with Alq3 as both ETL and EML, while the orange-light emitting OLED was prepared with rubrene deposited on Alq3. All the component layers of the OLED devices were deposited by a thermal evaporation technique in vacuum. Photoluminescence characteristics of the EML layers were investigated. Electrolumiscence characteristics of the OLED devices were comparatively investigated.

• Journal of Mechanical Science and Technology
• /
• 제14권12호
• /
• pp.1396-1402
• /
• 2000

Here is investigated the characteristics of double-diffusive convection in thermally-stable stratified horizontal fluid layer. By employing an electrochemical technique, and adopting aqueous CuSO$_4$-H$_2$SO$_4$solution as electrolyte, experiments on ionic mass transfer have been conducted systematically. And, also a new mass transfer correlation in double-diffusive situations has been derived by extending the model of micro-scales of turbulence, which was proposed by Arpaci. The resulting correlation of the Sherwood number as a function of the thermal Rayleigh number was in good agreement with the present experimental results. The present study provides plausible understanding in controlling both mass and heat transfer rates for practical situations including double-diffusive convection.

• 전자공학회논문지A
• /
• 제32A권5호
• /
• pp.737-748
• /
• 1995

In this paper, we studyed the variables in the design of multichip memory modules with 4M$\times$1bit DRAM chips to construct high capacity and high speed memory modules. The configuration of the module was 8 bit, 16 bit, and 32 bit DRAM modules with employing 0.6 W, 70 nsec 4M$\times$1 bit DRAM chips. We optimized routing area and wiring density by performing the routing experiment with the variables of the chip allocation, module I/O terminal, the number of wiring, and the number of mounting side of the chips. The multichip module was designed to be able to accept MCM-L techiques and low cost PCB materials. The module routing experiment showed that it was an efficient way to align chip I/O terminals and module I/O terminals in parallel when mounting bare chips, and in perpendicular when mounting packaged chips, to set module I/O terminals in two sides, to use double sided substrates, and to allocate chips in a row. The efficient number of wiring layer was 4 layers when designing single sided bare chip mounting modules and 6 layers when constructing double sided bare chip mounting modules whereas the number of wiring layer was 3 layers when using single sided packaged chip mounting substrates and 5 layers when constructing double sided packaged chip mounting substrates. The most efficient configuration was to mount bare chips on doubled substrates and also to increase the number of mounting chips. The fabrication of memory multichip module showed that the modules with bare chips can be reduced to a half in volume and one third in weight comparing to the module with packaged chips. The signal propagation delay time on module substrate was reduced to 0.5-1 nsec.

• Membrane and Water Treatment
• /
• 제5권2호
• /
• pp.109-122
• /
• 2014

Polyvinylidene fluoride (PVDF) hollow fiber membrane is widely used for water treatment. However, the weak mechanical strength of PVDF limits its application. To enhance its tensile strength, a double-layer composite hollow fiber membrane, with PVDF and polyetherimide as the external and inner layers, respectively, was successfully prepared through phase inversion technique. The effects of additive content, air gap distance, N,N-dimethyl-acetamide content in the inner core liquid, and the temperature of external coagulation bath on the membrane structure, permeation flux, rejection, tensile strength, and porosity were determined. Experimental results showed that the optimum preparation conditions for the double-layer composite hollow fiber membrane were as follows: PEG-400 and PEG-600, 5 wt%; air gap distance, 10 cm; inner core liquid and the external coagulation bath should be water; and temperature of the external coagulation bath, 40 C. A single layer PVDF hollow fiber membrane (without PEI layer) was also prepared under optimum conditions. The double-layer composite membrane remarkably improved the tensile strength compared with the single-layer PVDF hollow fiber membrane. The permeation flux, rejection, and porosity were also slightly enhanced. High-tensile strength hollow fiber PVDF ultrafiltration membrane can be fabricated using the proposed technique.

• 전자공학회논문지A
• /
• 제29A권2호
• /
• pp.77-79
• /
• 1992

We propose a self-aligned and double recessed technique for GaAs power MESFETs application. The gate length and the wide recess width are defined by a selective removal of the SiN layer using reactive ion etching(RIE) while the depth of the channel is defined by chemical etching of GaAs layers. The threshold voltages and the saturation drain voltage could be sucessfully controlled using this technique. The lateral-etched distance increases with the dry etching time and the source-drain breakdown voltage of MESFET increases up to about 30V at a pinch-off condition. The electrical characteristics of a MESFET with a gate length of 2 x10S0-6Tm and a source-gate spacing of 33 x10S0-6Tm show maximum transconductance of 120 mS/mm and saturation drain current density of 170-190mA/mm at a gate voltage of 0.8V.

• Applied Microscopy
• /
• 제24권4호
• /
• pp.107-114
• /
• 1994

The Rotaviruses are members of the family Reoviridae and are the major cause of severe childhood gastroenteritis worldwide. Recently, electron microscopy has been used to detect non-group A rotaviruses to determine a relatively high resolution structure of the rotavirion. Mature, infectious virions(double-shelled particles) have a diameter of approximately 70nm, and have a capsid structure composed of two concentric protein layers. We have studied patient's stool specimen by negative staining technique complete removal of sucrose suspension. This negative staining technique that could be carried out in about 30 minutes and that could be used with crude stool specimen was an advantage of major significance. Removal of sucrose in the sample by has been completed washing with distilled of sucrose and by washing with distilled water. Ultrastructurally, typical feature of rotavirus has a double capsid construction with an inner capsid of 55nm and on outer 65-70nm diameter can be clearly demonstrated.