• Journal of Biosystems Engineering
• /
• v.16 no.3
• /
• pp.290-297
• /
• 1991

For the efficient utilization of the solar thermal energy to overcome the time gap between to supply and demand, an efficient heat storage technique, especially high density-latent-heat storage system, is necessary. In this study, the performance of a panel type latent heat storage equipment during heat discharging process was analyzed theoretically and experimentally. In order to find out the performance of the system, computer simulation programs were developed by finite difference method. The governing equations were constructed by two dimensional heat conduction model with moving boundary. The results of the experimental and the theoretical analysis were reasonably well agreed. The efficiencies of the double pipe type and the panel type latent heat storage equipment were compared.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.242-244
• /
• 1987

Using the energy trapping theory and the acoustic coupling theory. the Bandpass filter(center frequency = 10.7 MHz) of the fundamental thickness mode was made from the composition of $Pb_{0.96}Sr_{0.04}(Zr_{0.53}Ti_{0.47})O_3$+ 1wt% $Fe_2O_3$. Also, in the double mode monolithic filter, It was observed that as decreasing the size of the electrodes, or shortening the gap between two electrodes, the percent frequency separation was increased. Based on these. a 10.7 MHz uniwafer filter was made having the characteristics that bandwidth was 700 KHz and the percent frequency separation was 6 [dB] and selectivity was 29 [dB], end spurious response was 24 [dB] and insertion loss was 7 [dB].

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1642-1644
• /
• 1997

The simulation study of lightning faults reducing effects by the installation of surge arresters on the 154 kV transmission line is stated here. For the purpose of detailed simulation of arcing horn, a flashover model with dynamic characteristics of arcing horn gap was represented as a non-linear inductance which is controlled by EMTP/TACS(Electromagnetic Transient Program/fransient Analysis of Control Systems) switches. The back flashover inducing current was increased from 50 kA to 88 kA by the installation of surge arresters on the transmission line which has one ground wire and 20 ohms of tower footing resistances. The great advantage of surge arrester installation on one circuit of the double circuit transmission line is to prevent the simultaneous back flashover up to 190 kA.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.203-203
• /
• 1999

In this paper, high concentration·yield multi-discharge type ozonizer( MDO ) of new discharge type using superposed silent discharge was designed and manufactured. MDO can be consisted with 3 kind of superposed silent discharge type ozonizer( SDO ) in accordance with power supply method that supplying power, which has 180[°] phase difference, to 3 electrodes and double gap. At the moment discharge characteristics and ozone generation characteristics of each SDO were investigated in accordance with quantify of supplied gas, the number of SDO, and the shapes of each SDO. In result ozone generation characteristics of 17185[ppm] and 783[g/kWh] were obtained, and whorl ozone of 17185[ppm] was in contact with dyeing water waste decolonization characteristics was excellent, so it confirmed that MDO could be used as water environment improvement facility.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.209-213
• /
• 1998

In the paper, we present the design procedure and analysis the fundamental characteristics for Linear DC Motor(LDM) using permeance method and finite element method (FEM). Designed LDM is made of two permanent magnets, three iron core and armature windings. For the design of the LDM, first of all it is necessary to calculate the air gap flux density and thrust force, after that to determine core size, the numbers of winding turns, winding width, etc. To demonstrate the method of caculation yields the right results, we used Maxwell program package for computing magnetic fields. Finally we find that the proposed design procedure in this paper is effective to design of LDM.

• ETRI Journal
• /
• v.27 no.4
• /
• pp.411-417
• /
• 2005

$Pr^{3+}-doped$ selenide glass optical fiber, which guarantees single-mode propagation of above at least 1310 nm, has been successfully fabricated using a Ge-Ga-Sb-Se glass system. Thermal properties such as glass transition temperature and viscosity of the glasses have been analyzed to find optimum conditions for fiber drawing. Attenuation loss incorporating the effects of an electronic band gap transition, Rayleigh scattering, and multiphonon absorption has also been theoretically estimated for the Ge-Ga-Sb-Se fiber. A conventional double crucible technique has been applied to fabricate the selenide fiber. The background loss of the fiber was estimated to be approximately 0.64 dB/m at 1650 nm, which can be considered fairly good. When excited at approximately 1470 nm, $Pr^{3+}-doped$ selenide fiber resulted in amplified spontaneous emission and saturation behavior with increasing pump power in a U-band wavelength range of 1625 to 1675 nm.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.3
• /
• pp.295-299
• /
• 2013

This paper presents the new structure of a spindle motor for hard disk drive (HDD). It can produce axial force as well as torque without a pulling plate or a pulling magnet required for the normal operation of a hydrodynamic bearing in rotating-shaft structure. The proposed models have different air gap length along the axial direction by changing the thickness of permanent magnet (PM). One has a single slope and the other has double slopes on the surface of PM. For the design of the proposed models, variables are defined and its effects on the motor performances are investigated by 3-demensional finite element analysis (FEA). The equi-performance curves are investigated for the main characteristics of the spindle motor such as generated torque, axial force and torque ripple ratio. The validity of the proposed models is verified by the feasibility study and performance evaluation.

• Journal of the Korean Magnetics Society
• /
• v.5 no.4
• /
• pp.294-298
• /
• 1995

A shielded magnetoresistive (SMR) head which has double MR films and linearizes each other has been designed and studied by applying the transmission-line model. We have analyzed the yoke efficiency, bias efficiency and read efficiency of the SMR head. The read efficiency strongly depends on the height of the sensor and slightly on the other geometric parameters. The yoke and bias efficiencies vary with gap length, insulated layer thickness and relative permeability. A quasi-index reduction in the signal flux is observed when the displacement moves away from the medium.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.276-278
• /
• 1996

The breakdown Process in large gaps is greatly influenced by the gap geometry. Therefor full scale test are essential for the economical and reliable air insulation design. For switching surge design of 765 kV double circuit transmission line KEPRI is carrying the verifying tests using impulse voltage generator at Gochang test site. In this paper, the intermediate results of verifying tests are presented and the switching surge design criteria of 765 kV transmission tower flashover paths are discussed.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.489-490
• /
• 2015

본 논문에서는 독립 3상 구조 이중공극 영구자석형 동기 전동기 구동 시스템의 Y 및 ${\Delta}$결선에 따른 운전특성을 비교 분석하고자 한다. 본 연구에 사용된 전동기의 경우, 일반적인 3상 교류 전동기의 형태와는 달리 양측 회전자와 고정가 대칭인 이중공극형 구조를 가진다. 또한 고정자측은 링 형태의 독립 단상 권선 기반의 모듈 형태로 구성되어있기 때문에 Y결선 또는 ${\Delta}$결선이 가능한 구조를 보여주고 있다. 따라서 본 논문에서는 두 가지의 결선방식에 대한 속도제어 특성을 분석하기 위해서 Y 및 ${\Delta}$결선의 수학적인 모델링을 수립하였고 실험을 통하여 각 결선에 따른 운전특성을 비교 분석하였다.