• Smart Structures and Systems
• /
• v.21 no.1
• /
• pp.99-111
• /
• 2018

Wind induced large bending oscillation amplitudes in tall and slender telecommunication steel towers may lead to precocious fatigue cracks and consequent risk of collapse of these structures, many of them installed in rural areas alongside highways and in highly populated urban areas. Varying stress amplitudes at hot spots may be attenuated by means of passive control mechanical devices installed in the tower. This paper gives an account of both mathematical-numerical model and the technique applied to design and evaluate the performance of a double controller installed in existing towers which is composed by a nonlinear pendulum and a novel type of passive controller described herein as a planar motion disk mounted on shear springs. Results of experimental measurements carried out on two slender tubular steel towers under wind action demonstrate the efficiency of the double controllers in attenuating the towers bending oscillation amplitudes and consequent stress amplitudes extending the towers fatigue life.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.513-516
• /
• 2008

The luminance efficiency of the red organic light-emitting devices fabricated utilizing a double electron transport layer (ETL) consisting of an Al-doped and an undoped layer was investigated. The Al atoms existing in the ETL acted as hole blocking sites, resulting in an increase in the luminance efficiency.

• Rapid Communication in Photoscience
• /
• v.3 no.2
• /
• pp.32-34
• /
• 2014

We report the performance improvement of electrochromic devices for modulating the transmittance contrast of long wavelength infrared light between 1.5 and 5.0 ${\mu}m$ based on a double layer of conducting polymers. The device, fabricated with poly(3-hexylthiophene) (P3HT) and poly(3,4-ethylenedioxythiophene) (PEDOT) as the first and second layers, respectively, showed an transmittance contrast of 60% with a response rate under 5 s, which is greater than the transmittance contrast of cells based on only P3HT or PEDOT (approximately 40%).

• Fisheries and Aquatic Sciences
• /
• v.14 no.1
• /
• pp.62-69
• /
• 2011

The effects of actively stimulating devices (ASD) on juvenile flatfish escape were studied to increase escape rates from the cod end by encouraging fish to approach the net wall. Two kinds of ASD were designed: a fluttering net panel, i.e., a free-end flag-like net panel, and a double conical rope array. Escape responses of juvenile bastard halibut were observed in a circulating water channel using two model cod ends, one made with diamond-shaped 43-mm-mesh-size polyethylene (PE) as a high-contrast cod end and the other with polyamid (PA) mono-ply as a low-contrast cod end. Retention rate was significantly lower with the double conical rope-array ASD in the PE cod end than with conventional PE cod ends only or the fluttering net-panel ASD inside the PE cod end. Mean retention rate with the low-contrast PA cod end was also significantly lower than that with the high-contrast PE conventional cod end. Therefore, active fluttering devices using a double conical rope array together with less visible low-contrast netting in the cod end could help to reduce the bycatch of juvenile flatfish by weakening their optomotor response and actively driving fish to the side net panel.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.4
• /
• pp.174-177
• /
• 2007

We fabricated organic field-effect transistors (OFETs) based a fluorinated copper phthalocyanine ($F_{16}CuPC$) and copper phthalocyanine (CuPc) as an active layer. And we observed the surface morphology of the $F_{16}CuPC$ thin film. The $F_{16}CuPC$ thin film thickness was 40 nm, and the channel length was $50{\mu}m$, channel width was 3 mm. And we also fabricated the $F_{16}CuPc/CuPc$ double layer FET and with different $F_{16}CuPc$ film thickness devices. We observed the typical current-voltage (I-V) characteristics and capacitance-voltage (C-V) in $F_{16}CuPc$ FET and we calculated the effective mobility. From the double layer FET devices, we observed the higher drain current more than single layer FET devices.

• Clinical Endoscopy
• /
• v.55 no.5
• /
• pp.605-614
• /
• 2022

The double-guidewire method has been increasingly used in endoscopic procedures for biliary and pancreatic diseases in recent years, including endoscopic retrograde cholangiopancreatography and endoscopic ultrasonography-related procedures. In addition, double-lumen catheters with uneven distal and proximal lumen openings have been introduced, making it possible to easily create a double-guidewire situation, and the usefulness of the double-guidewire technique using uneven double-lumen cannulas has been widely reported. Although the advantages of using two guidewires depend on the particular situation and the appropriate use of the two guidewires, deepening the knowledge of the double-guidewire method will contribute greatly to troubleshooting in daily practice. In this review, the usefulness of the double-guidewire technique is discussed with respect to two main areas: selective insertion of guidewires and devices and biliary cannulation.

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.733-737
• /
• 2011

This paper has studied subthreshold characteristics for double gate(DG) MOSFET using Gaussian function in solving Poisson's equation. Typical two dimensional analytical transport models have been presented for symmetrical Double Gate MOSFETs (DGMOSFETs). Subthreshold swing and threshold voltage are very important factors for digital devices because of determination of ON and OFF. In general, subthreshold swings have to be under 100mV/dec, and threshold voltage roll-off small in short channel devices. These models are used to obtain the change of subthreshold swings and threshold voltage for DGMOSFET according to channel doping profiles. Also subthreshold swings and threshold voltages have been analyzed for device parameters such as channel length, channel thickness and channel doping profiles.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.1
• /
• pp.45-48
• /
• 2014

We have investigated the effects of an Ag capping layer on the emission characteristics of transparent organic light-emitting devices with Ca/Ag double-layer cathodes. The thickness of the Ag layer was varied from 10 to 30 nm, whereas the Ca was fixed to be a 10 nm in the Ca/Ag structure. The luminance and current efficiency on the cathode and anode sides are significantly dependent on the Ag thickness. For example, the current efficiency on the anode side increases from 8.4 to 11.7 cd/A, whereas, on the cathode side, it decreases from 3.2 to 0.2 cd/A as the Ag thickness increases from 10 to 30 nm. These changes in emission characteristics were investigated by measuring electroluminescence, transmission, and reflection spectra.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.5
• /
• pp.629-636
• /
• 2012

Objective: The purpose of this study is to compare the characteristics of single and double finger gestures related on the web browser and to extract the appropriate finger gestures. Background: As electronic equipment emphasizes miniaturization for improving portability various interfaces are being developed as input devices. Electronic devices are made smaller, the gesture recognition technology using the touch-based interface is favored for easy editing. In addition, user focus primarily on the simplicity of intuitive interfaces which propels further research of gesture based interfaces. In particular, the fingers in these intuitive interfaces are simple and fast which are users friendly. Recently, the single and double finger gestures are becoming more popular so more applications for these gestures are being developed. However, systems and software that employ such finger gesture lack consistency in addition to having unclear standard and guideline development. Method: In order to learn the application of these gestures, we performed the sketch map method which happens to be a method for memory elicitation. In addition, we used the MIMA(Meaning in Mediated Action) method to evaluate gesture interface. Results: This study created appropriate gestures for intuitive judgment. We conducted a usability test which consisted of single and double finger gestures. The results showed that double finger gestures had less performance time faster than single finger gestures. Single finger gestures are a wide satisfaction difference between similar type and difference type. That is, single finger gestures can judge intuitively in a similar type but it is difficult to associate functions in difference type. Conclusion: This study was found that double finger gesture was effective to associate functions for web navigations. Especially, this double finger gesture could be effective on associating complex forms such as curve shaped gestures. Application: This study aimed to facilitate the design products which utilized finger and hand gestures.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.2
• /
• pp.85-89
• /
• 2018

In this study, functional transparent conducting layers were investigated for Si-based photoelectric applications. Double transparent conductive oxide (TCO) films were deposited on a Si substrate in the sequence of indium tin oxide (ITO) followed by aluminum-doped zinc oxide (AZO). First, we observed that the conductivity and transparency of AZO dominate the overall performance of the double TCO layers. Secondly, the double layered TCO film (consisting of AZO/ITO) deposited by sputtering was compared to a AZO-only film in terms of their optical and electrical properties. We prepared three different AZO films: ITO:3min/AZO:10min, ITO:5min/AZO:7min, and ITO:7min/AZO:4min. The results show that the optical properties (transmittance, absorbance, and reflection) can be controlled by the film composition. This may provide a significant pathway for the manipulation of the optical and electrical properties of photoelectric devices.