• Structural Engineering and Mechanics
• /
• 제5권5호
• /
• pp.663-677
• /
• 1997

Bond-slip behavior between reinforcement and concrete under push-pull cyclic loadings is numerically investigated based on a reinforcement model proposed in this paper. The equivalent reinforcing steel model considering the bond-slip effect without taking double nodes is derived through the equilibrium at each node of steel and the compatibility condition between steel and concrete. Besides a specific transformation algorithm is composed to transfer the forces and displacements from the nodes of the steel element to the nodes of the concrete element. This model first results in an effective use in the case of complex steel arrangements where the steel elements cross the sides of the concrete elements and second turns the impossibility into a possibility in consideration of the bond-slip effect in three dimensional finite element analysis. Finally, the correlation studies between numerical and experimental results under the continuously repeated large deformation stages demonstrate the validity of developed reinforcing steel model and adopted algorithms.

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2669-2672
• /
• 2014

Double bond migration of butene-2 to butene-1 over ${\eta}$-alumina was investigated. The effects of calcination temperature on catalytic properties were analyzed by applying BET surface area, XRD, $NH_3$-TPD, and FT-IR of adsorbed pyridine techniques. The highest activity of the ${\eta}$-alumina catalyst calcined at $600^{\circ}C$ could be attributed not only to the highest amount of weak and medium strength acid sites, but also to the highest ratio of medium to weak strength Lewis acid sites.

• 대한치과기공학회지
• /
• 제41권4호
• /
• pp.279-285
• /
• 2019

Purpose: The dental CAD / CAM system has been popular with the development of the digital dental industry. Zirconia is a typical material in dental CAD / CAM systems. Zirconia crowns are classified into single layer and double layer. This study is about the double layer crown of zirconia. The surface roughness, bond strength and fracture patterns of the zirconia surface were observed. Methods: Zirconia blocks were cut using a low speed cutter. Sintered to form a plate shape (6mm × 6mm × 3mm). The prepared specimens were surface treated in four ways. Surface roughness and bond strength were measured. And the fracture pattern was observed. Results: Result of surface treatment of zirconia. The surface roughness test results were as ET 2.87 ㎛, ST 2.67 ㎛, LT 2.44 ㎛, AT 2.41 ㎛, CN 2.08 ㎛ order. Bond Strength results were as LT 25.09 MPa, AT 23.27 MPa, ST 21.27 MPa, ET 21.09 MPa, CN 16.12 MPa order. Fracture patterns showed cohesive failure of 25-50% of the bond area. Conclusion: Surface roughness, bond strength and fracture pattern of the zirconia surface were observed. Etching the surface treatment of zirconia materials has been shown to affect the surface roughness. Zirconia special binder treatment has been shown to affect the bond strength improvement.

• Restorative Dentistry and Endodontics
• /
• 제36권3호
• /
• pp.203-210
• /
• 2011

연구목적: 이 연구의 목적은 다양한 방식의 한 단계 자가 부식 접착제의 적용이 직접 복합 레진 수복의 미세 인장 강도에 미치는 영향을 평가하는 것이었다. 연구 재료 및 방법: 36개의 발거된 대구치를 사용하여, 3종류의 한 단계 자가 부식 접착제(Clearfil Tri-S Bond, Adper Prompt L-Pop, G-Bond)와 적용 방식에 따라 12개의 군으로 나누었다. 접착제를 다음의 방식으로 상아질에 적용하였다. 1) single coating, 2) double coating, 3) manual agitation, 4) ultrasonic agitation. 접착제 적용 후, 광중합 복합 레진으로 수복하였다. 24시간 동안 실온의 증류수에 보관한 후, 각 군당 15개의 시편을 준비하여 미세인장 결합 강도를 측정하였다. 결과: Manual agitation, ultrasonic agitation군은 single coating, double coating군에 비해 유의하게 높은 미세인장 결합 강도를 보였다. Double coating군은 single coating군에 비해 유의하게 높은 미세인장 결합 강도를 보였으며, manual agitation군과 ultrasonic agitation군 간에는 미세인장 결합 강도의 유의한 차이가 없었다. 접착제 종류에 따라 미세인장 결합 강도의 유의한 차이가 있었고, 그 중 Clearfil Tri-S Bond가 가장 높았다. 결론: 한 단계 자가 산부식 접착제의 적용 방법과 재료에 따라 미세인장 결합 강도에 유의한 차이가 있었다. 접착제 종류에 관계없이 manual agitation과 ultrasonic agitation은 유의하게 높은 미세인장 결합강도를 보였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.217-218
• /
• 2019

In this study, to overcome the limitation of material application as the surface layer of bridge decks (asphalt concrete, concrete), a newly developed waterproof sheet is proposed to be usable for both asphalt concrete and concrete. Subsequent tensile bond strength was tested, and the test results showed that the tensile bond strengths were similar to depending on the type of the surface layer material for bridge decks, confirming the applicability of the proposed material.

• 접착 및 계면
• /
• 제14권3호
• /
• pp.135-145
• /
• 2013

환경친화형 반도체 봉지재로서 할로겐 화합물 등의 첨가형 난연제를 혼합하지 않고 자기소화성을 발현시키는 에폭시수지 조성물에 관해 연구하였다. 탄화수소계 방향족 공액이중결합의 구조를 갖는 에폭시수지와 페놀수지의 반응물에서 자기소화성을 갖는 낮은 연소열이 확인되었다. 본 연구에서는 탄화수소계 방향족 공액이중결합에 헤테로원자계 이중결합인 아조메틴기를 도입하여 더욱 낮은 연소열을 확인할 수 있었다. 낮은 연소열의 결과는 높은 반응열과 열전이온도 그리고 빠른 반응성과 관련이 있으며 아조메틴기의 헤테로원자 구조의 영향 때문으로 보인다.

• Bulletin of the Korean Chemical Society
• /
• 제24권8호
• /
• pp.1059-1060
• /
• 2003

• 약학회지
• /
• 제18권3호
• /
• pp.217-227
• /
• 1974

It was established that .alpha.-spinasterol (I) was isomerized by hydrogen chloride to a mixture of two isomers. These isomers were separated into each of components and identified as .DLETA.$^{8(14),22}$ -stigmastadienol (III) and ${\delta}$$^{14,22}$ -stigmastadienol (IV), respectively. The mass spectra of these compounds were found to be particularly suitable to idetify the position of nuclear double bond of sterols possessing 22 : 23 -double bond in side chain.

• Bulletin of the Korean Chemical Society
• /
• 제4권2호
• /
• pp.95-99
• /
• 1983

Photoreaction of 8-methoxypsoralen (8-MOP) with thymine (${\ge}$ 300 nm) was carried out in the dioxane-water frozen state. One major and two minor monoaddition products between 8-MOP and thymine were isolated by various chromatographic methods. Major monoadduct was characterized to be a C4 cycloaddition product formed between 5,6-double bond of thymine and 3,4-double bond of 8-MOP with cis-anti stereochemistry. Two minor adducts were proved to be stereoisomers of this major adduct.

• Bulletin of the Korean Chemical Society
• /
• 제10권6호
• /
• pp.543-546
• /
• 1989

The photocycloaddition reaction of khellin with several olefins has been investigated. The photocycloadducts are formed regioselectively on furanyl 4',5'-double bond of khellin probably due to the localization of excitation energy on the furanyl 4',5'-double bond in the reactive excited state. The photocycloaddition reaction proceeds through the excited triplet state and the same product was formed when khellin is irradiated with dimethylfumarate or dimethylmaleate indicating the formation of common intermediate. The quantum yields of photocycloadduct formation, fluorescence, and intersystem crossing are very sensitive to proton-donating ability of solvents.