• 한국약용작물학회지
• /
• 제24권3호
• /
• pp.207-213
• /
• 2016

Background: This study aimed to investigate the flowering and fruits formation characteristics of Korean Panax ginseng varieties. The results will provide basic data for ginseng seed production and breeding program. Methods and Results: The characteristics investigated included flowering date, seed setting rate, seed type and seed production. The ginseng variety Chungsun had the earliest emergency and flowering dates, whereas Sunhyang showed late emergence and flowering dates. The emergence date of Chunpoong was not later than that of the other varieties, but the flowering date was delayed. The seed setting rate was 64.6%, 75.8%, 78.5% and 74.4% for three, four, five and six-year-old varieties, respectively. The ratio of double seed (RD) for Sunhyang and Chungsun were higher than those for the others, whereas the RD for Chunpoong was the lowest. Yunpoong and Sunone had many stems per plant and a high seed production rate. Seed production was 21.7, 67.7, 74.4 and 89.0kg/10 a in three, four, five and six-year-old varieties, respectively. Conclusions: The emergence date ranged from April 15 to 25, and the flowering date was from May 10 to the 19 for the new ginseng varieties. The average seed multiplication of the ginseng varieties was about 8.5 and 21.1 times a year for varieties in which, seed-production occurs once a year for over four years and four times over six years, respectively.

• 대한의용생체공학회:의공학회지
• /
• 제25권1호
• /
• pp.71-76
• /
• 2004

척추 측만증 교정 시 유합 범위에 따른 수술 후 의 효과를 분석하기 위하여 King-Moe type II 형태의 척추 측만증 환자를 대상으로 이에 대한 수학적 유한 요소 모델을 개발하였다. 유한 요소 모델을 이용하여 척추경 나사못을 이용한 고정 및 강봉 감염술 형태의 수술모사를 수행하였으며, 유합 범위를 각기 달리하여 수술 시뮬레이션 후의 척추계의 변화 즉 Cobb 각도, 첨추체 축회전, 흉추 후만각 그리고 늑골고의 변화를 정량적으로 계산하였다. 해석 결과 강봉 감염술의 경우에서 보다 강봉을 척추경 나사못에 연결시키는 과정에서 훨씬 더 많은 Cobb각도의 변화를 얻을 수 있었다. 강봉 감염술 과정에서는 약간의 Cobb각도 감소를 유발시킬 수 있었으나 오히려 척추체 축회전과 늑골 돌출고의 증가를 나타내었다 아울러 강봉과 척추경 나사못의 체결 과정이 척추 후만각 유지에도 큰 역할을 하고 있음을 알 수 있었다. 유합 범위를 변곡 발생 추체의 위치 보다 한 단계씩 길게(T4-12) 하여 60o의 강봉 감염술을 시행하였을 경우 Cobb 각도를 두 배 감소시킬 수 있었으나 급격한 늑골고와 첨추체 축회전량의 증가가 유발되었다. 해석 결과 유합 범위는 만곡 흠추체에서 변곡이 발생되는 위치 보다 한 레벨씩 작게 선정하는 것이 최적의 유합 범위임을 알 수 있었다.

• 한국응용곤충학회지
• /
• 제50권3호
• /
• pp.185-194
• /
• 2011

꽃매미의 발육단계별 표피탄화수소를 비교하기 위하여 GC와 GC-MS를 이용하여 분석하였다. 분석된 꽃매미의 표피탄화수소의 종류는 알이 32종, 약충은 령별로 각각 33, 28, 38, 37종이었고 2령 약충에서 가장 적게 나타났다. 반면 성충은 암 수 모두 46종으로 동일하였으며, 꽃매미의 충태 중 가장 많은 종류의 탄화수소를 함유하고 있었다. 발육단계별 물질 함량을 분석한 결과, 알은 메틸기를 갖고 있는 9-methylheptacosane을 가장 많이 함유하고 있었으며(15.11%), 령기별 약충은 n-heptacosane을 가장 많이 함유하고 있었다(15.75, 22.42, 25.04, 23.11%). 반면 성충은 암 수 모두 n-nonacosane을 가장 많이 함유하고 있었다(13.42, 16.55%). 표피탄화수소의 구성물질을 5개 그룹(n-alkanes, monomethylalkanes, dimethylalkanes, trimethylalkanes, olefins)으로 나누고 물질 함량을 꽃매미 발육단계별로 비교하였다. 꽃매미의 알 표피는 대부분이 monomethylalkanes인 포화탄화수소로 이루어져 있고(45.39%), 약충은 포화탄화수소의 기본구조인 n-alkanes이 대부분이었다(37.63-46.12%). 또한 성충은 암 수에 따라 차이가 있었지만, n-alkanes과 monomethylalkanes을 고루 함유하는 것으로 나타났다. 반면 모든 충태에서, 3개이상의 메틸기를 갖거나 이중 결합을 포함하는 구조는 극히 적었다.

• 한국환경보건학회지
• /
• 제40권5호
• /
• pp.331-345
• /
• 2014

Objectives: The exponential growth of chemicals, an area of high concern in developed countries like the US (i.e., the Gore Initiative) and in the EU (i.e., REACH), as well as recent chemical accidents in Korea, have provoked nationwide concerns and resultant legal enforcement. This study aims to compare the laws of the Ministry of Environment (the Chemical Substances Control Act (CSCA), Act on the Registration and Evaluation, etc. of Chemical Substances (ARECS)) with those of the Ministry of the Employment and Labor (Occupational Safety and Health Act (OSHA)). Methods: Each law pertaining to the Ministry of Environment and the Ministry of the Employment and Labor was downloaded from the official legal information system (www.law.go.kr). The objectives of each law and the major contents related to chemical management were compared and summarized. Results: The CSCA and the ARECS are focused on the protection of people and the environment, while the OSHA relates to the protection of workers. The right to know of people and workers has been reinforced. The former two laws emphasize prevention, but the OSHA contains both preventive and post-accident measures. The role of the Ministry of Employment was reinforced with the promulgation of the CSCA and ARECS, which contain regulations such as adjacent area impact evaluation, risk control planning, chemical statistical survey and construction and operation of information, provision of risk control plans, response to chemical accidents and registration of chemical substances. Conclusion: We found that the three laws discussed here have several similar clauses designed to protect people and the environment from risks that may be caused by the use of chemicals, even though there are some differences among them in terms of objectives and contents. This review concluded that several clauses that can be regarded as double regulation should be unified in order to minimize the waste of government administrative resources and socio-economic losses.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제40권
• /
• pp.35.1-35.7
• /
• 2018

Background: After the resection at the mandibular site involving oral cancer, free vascularized fibular graft, a type of vascularized autograft, is often used for the mandibular reconstruction. Titanium mesh (T-mesh) and particulate cancellous bone and marrow (PCBM), however, a type of non-vascularized autograft, can also be used for the reconstruction. With the T-mesh applied even in the chin and angle areas, an aesthetic contour with adequate strength and stable fixation can be achieved, and the pores of the mesh will allow the rapid revascularization of the bone graft site. Especially, this technique does not require microvascular training; as such, the surgery time can be shortened. This advantage allows older patients to undergo the reconstructive surgery. Case presentation: Reported in this article are two cases of mandibular reconstruction using the ready-made type and custom-made type T-mesh, respectively, after mandibular resection. We had operated double blind peer-review process. A 79-year-old female patient visited the authors' clinic with gingival swelling and pain on the left mandibular region. After wide excision and segmental mandibulectomy, a pectoralis major myocutaneous flap was used to cover the intraoral defect. Fourteen months postoperatively, reconstruction using a ready-made type T-mesh (Striker-Leibinger, Freibrug, Germany) and iliac PCBM was done to repair the mandible left body defect. Another 62-year-old female patient visited the authors' clinic with pain on the right mandibular region. After wide excision and segmental mandibulectomy on the mandibular squamous cell carcinoma (SCC), reconstruction was done with a reconstruction plate and a right fibula free flap. Sixteen months postoperatively, reconstruction using a custom-made type T-mesh and iliac PCBM was done to repair the mandibular defect after the failure of the fibula free flap. The CAD-CAM T-mesh was made prior to the operation. Conclusions: In both cases, sufficient new-bone formation was observed in terms of volume and strength. In the CAD-CAM custom-made type T-mesh case, especially, it was much easier to fix screws onto the adjacent mandible, and after the removal of the mesh, the appearance of both patients improved, and the neo-mandibular body showed adequate bony volume for implant or prosthetic restoration.

• 대한조선학회지
• /
• 제22권1호
• /
• pp.45-53
• /
• 1985

For the analysis of vertical vibrations of a ship's hull, the Timoshenko beam analogy is accepted up to seven or eight-node modes provided that the system parameters are properly calculated. As to the shear coefficient, it has been a common practice to apply the strain energy method or the projected area method. The theoretical objection to the former is that it ignores lateral contraction due to Poisson's ratio, and the latter is of extreme simplifications. Recently, Cowper's and Stephen's shear coefficient formulas have drawn ship vibration analysts' attentions because these formulas, derivation of which are based on an integrations of the equations of three-dimensional elasticity, take Poisson's ratio into account. Providing computer programs for calculation of the shear coefficient of ship sections modeled as thin-walked multicell sections by each of the forementioned methods, the authors calculated natural vibration characteristics of a bulk carrier and of a container ship by the transfer matrix method using shear coefficients obtained by each of the methods, and discussed the results in comparision. The major conclusions resulted from this investigation are as follows: (1) The shear coefficients taking account of the effects of Poisson's ratio, Cowper's $K_c$ and Stephen's $K_s$, result in higher values of about 10% in maximum as compared with the shear coefficient $K_o$ based on the conventional strain energy methods; (a) $K_c/K_o{\cong}1.05\;and\;K_s/K_o{\cong}1.10$ for ships having single skin side-shell such as a bulk carrier. (b) $K_c/K_o{\cong}1.02\;and\;K_s/K_o{\cong}1.05$ for ships having longitudinally through bulkheads and/or double side-shells in the portion of the cargo hod such as a container carrier. (2) The distributions of the effective shear area along the ship's hull based on each of $K_o,\;K_c\;and\;K_s$ are similar each another except the both end portions. (3) Natural frequencies and mode shapes of the hull based on each of $K_c\;and\;K_s$ are of small differences as compared each other. (4) In cases of using $K_c\;or\;K_s$ in ship vibration analysis, it is also desirable to have the bending rigidity be corrected according to the effective breadth concept. And then, natural frequencies and mode shapes calculated with the bending rigidity corrected in the above and with each of $K_o,\;K_c\;and\;K_s$ result in small differences as compared each another. (5) Referring to those mentioned in the above (3) and (4) and to the full-scale experimental results reported by Asmussen et al.[17], and considering laboursome to prepare the computer input data, the following suggestions can safely be made; (a) Use of $K_o$ in ship vibration analysis is appropriate in practical senses. (b) Use of $K_c$ is appropriate even for detailed vibration analysis of a ship's hull. (6) The effective shear area based on the projected area method is acceptable for the two-node mode.

• Bulletin of the Korean Chemical Society
• /
• 제28권11호
• /
• pp.2089-2092
• /
• 2007

Tantalum-containing metal oxides, well known for their efficiency in water splitting and H2 production, have never been used in visible light driven photodecomposition of H2S and H2 production. The present work is an attempt in this direction and investigates their efficiency. A mixed metal oxide, ZnFe2Ta2O9, with the inclusion of Fe2O3 to impart color, was prepared by the conventional ceramic route in single- and double-calcinations (represented as ZnFe2Ta2O9-SC and ZnFe2Ta2O9-DC respectively). The XRD characterization shows that both have identical patterns and reveals tetragonal structure to a major extent and a minor contribution of orthorhombic crystalline system. The UV-visible diffuse reflection spectra demonstrate the intense, coherent and wide absorption of visible light by both the catalysts, with absorption edge at 650 nm, giving rise to a band gap of 1.9 eV. Between the two catalysts, however, ZnFe2Ta2O9-DC has greater absorption in almost the entire wavelength region, which accounts for its strong brown coloration than ZnFe2Ta2O9-SC when viewed by the naked eye. In photocatalysis, both catalysts decompose H2S under visible light irradiation (λ ≥ 420 nm) and produce solar H2 at a much higher rate than previously reported catalysts. Nevertheless, ZnFe2Ta2O9-DC distinguishes itself from ZnFe2Ta2O9-SC by exhibiting a higher efficiency because of its greater light absorption. Altogether, the tantalum-containing mixed metal oxide proves its efficient catalytic role in H2S decomposition and H2 production process also.

• Journal of Ginseng Research
• /
• 제41권3호
• /
• pp.353-360
• /
• 2017

Background: Endophytic fungi play an important role in balancing the ecosystem and boosting host growth. In the present study, we investigated the endophytic fungal diversity of healthy Panax notoginseng and evaluated its potential antimicrobial activity against five major phytopathogens causing root-rot of P. notoginseng. Methods: A culture-dependent technique, combining morphological and molecular methods, was used to analyze endophytic fungal diversity. A double-layer agar technique was used to challenge the phytopathogens of P. notoginseng. Results: A total of 89 fungi were obtained from the roots, stems, leaves, and seeds of P. notoginseng, and 41 isolates representing different morphotypes were selected for taxonomic characterization. The fungal isolates belonged to Ascomycota (96.6%) and Zygomycota (3.4%). All isolates were classified to 23 genera and an unknown taxon belonging to Sordariomycetes. The number of isolates obtained from different tissues ranged from 12 to 42 for leaves and roots, respectively. The selected endophytic fungal isolates were challenged by the root-rot pathogens Alternaria panax, Fusarium oxysporum, Fusarium solani, Phoma herbarum, and Mycocentrospora acerina. Twenty-six of the 41 isolates (63.4%) exhibited activity against at least one of the pathogens tested. Conclusion: Our results suggested that P. notoginseng harbors diversified endophytic fungi that would provide a basis for the identification of new bioactive compounds, and for effective biocontrol of notoginseng root rot.

• 한국항해항만학회지
• /
• 제26권2호
• /
• pp.167-175
• /
• 2002

부산항은 우리나라의 대표적인 사회간접자본시설로서 국가경제발전의 견인차 역할을 수행해 왔다. 그러므로 항만관련시설들의 상호 보완적인 시스템화를 통하여 부산항을 세계 제일의 물류기지로 발전시켜 향후 동북아 물류중심항으로의 기능을 원만히 수행할 수 있도록 정부가 부산항 항만배후도로의 시설주체가 되어야 한다. 이에 본 논문에서는 부산항의 발전을 저해하는 컨테이너세의 문제점과 폐지에 관한 현실적인 접근을 통해 컨테이너세와 그 용도에 관한 분석 및 현황파악을 바탕으로 컨테이너세의 타당성 여부를 검토하여 다름과 같이 정리하였다. 첫째, 항만에서 역외 고속도로까지를 연결하는 항만배후도로는 항만의 일부분이므로 정부가 시설투자의 주체가 되어야 한다. 둘째, 컨데이너세를 징수함으로써 화주와 선사는 수출입 물류비와 함께 컨테이너세를 추가적으로 지불하여 상당한 비용적 부담을 안고 있다. 셋째, 공컨테이너 또는 환적컨테이너의 수출입 비중은 상당히 높아, 부산시 교통체증을 유발하는 요인으로 작용하고 있으나, 부과대상에서 제외되고 있어 컨테이너세 부과대상의 형평성에 크게 어긋나고 있다. 넷째, 동북아 물류허브항만이 되기 위하여 중국, 대만, 일본의 경쟁항만들은 항만비용의 절감을 통해 경쟁력을 향상시키고 있는 반면, 부산항은 컨테이너세라는 추가적인 세금을 부과함으로써 가격 경쟁력의 약화를 가져와 동북아 물류허브항만으로 육성하기 위한 전략에 큰 차질을 빚고 있다.

• 한국재난정보학회 논문집
• /
• 제15권2호
• /
• pp.301-311
• /
• 2019

연구목적 방법: 본 연구에서는 포항지진 피해자들에 대한 설문 면담조사를 통해 이재민들에게 지원하는 임시주거용 조립주택의 개선방안 도출을 통한 리모델링(안) 제시를 목적으로 한다. 연구결과: 시설적 측면에서의 각 공간별 주요 개선사항은 다음과 같다. 첫째, 화장실 조리공간의 확장을 위해 기존에 있던 중문과 가벽을 없애고 화장실의 폭을 확장, 화장실의 확장 폭 만큼 조리대를 추가 배치하여 불편을 최소화한다. 둘째, 한정된 면적에서 수납공간 확보를 위해 별도의 수면구획을 설정, 하부에 수납장을 설치하여 수면공간을 수납공간으로 활용한다. 이때, 수면공간의 크기는 더블베드 사이즈로 설정한다. 셋째, 프라이버시 확보를 위해 양쪽 창문에 커튼 블라인드를 설치하여 사생활 보호는 물론 심리적 안정을 도모한다. 결론: 본 연구에서 제안한 임시주거용 조립주택의 리모델링(안)을 활용 적용한다면 보다 나은 거주환경을 제공할 수 있을 것으로 판단된다. 또한, 이재민들의 니즈를 반영하여 불편사항을 최소화함으로써 공간의 효율성을 높이고 기존의 공간적 한계를 극복할 수 있을 것으로 사료된다.