• KIEAE Journal
• /
• v.15 no.5
• /
• pp.107-112
• /
• 2015

Purpose: This study desires to investigate an effect of indoor temperature, humidity, and illuminance targeting a planting system of double-skin facade and cavity space adjacent to the outside within a certain period of winter. Through this, the study suggests a basic material about an energy conservation effect of double window system using planting to reduce heating load of a building in winter, so desires to contribute to indoor thermal comfort effect and illuminance correction study of double window and indoor plant. Method: Considering effects such as day and night climatic elements and air conditions in winter, illuminance measurement was conducted through a double-skin facade of space, a subject of the measurement, on the basis of practical residence time of a resident, and this study analyzed characteristics of indoor illuminance about this. The study measured and compared a change of insolation, dry-bulb temperature, and relative humidity at each indoor-outdoor measuring point, so measured and compared characteristics of an indoor temperature effect by elements of double-skin facade and indoor plant. Result: Through this study, the researcher could determine that indoor plant within double window in winter not only blocks solar radiation but also photosynthesizes, so is somewhat disadvantageous to winter thermal comfort reducing heating load. In addition, solar radiation going through interior plays a role to bring down somewhat high humidity to about 50% of reasonable humidity, so plays a direct role of maintenance of comfortable indoor space. Although there are effects such as blocking of solar radiation and temperature reduction, this has a positive influence on humidity control and proper illuminance distribution. The researcher could determine that illuminance, temperature, and humidity by solar radiation penetration for the whole measuring time play a role to supplement indoor environment mutually.

• KIEAE Journal
• /
• v.8 no.1
• /
• pp.11-18
• /
• 2008

The purpose of this study is to analyze application methods and structural characteristics of each element of environment-friendly European housing through classification of skin types. The results of the study are following. 1) The skins are classified by three types; single skin with multi layers, double skin with single layer and double skin with multi layers. 2) Most single skins with multi-layer are composed with wooden louvers, sun blinds and insulating windows. There are introduction of atrium and balcony, and variation sectional space composition according to cases. 3) There are two types of double skins; to put cavity between inner skin and outer skin and more extensional spaces such as balconies, corridors and stair halls. Solar walls and mechanical ventilators are often introduced to double skins with multi-layer. 4) The functions of the latest environment-friendly skins are vary from controllers and buffers of indoor environmental elements such as temperature, light, air and sound to equipments to perform essential functions to efficiently operate HVAC systems.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.6 no.2
• /
• pp.255-266
• /
• 1999

This study was done to analyze the effects of a smear in the nasal cavity against nosocomial Infection. The smear used was mupirocin, and the study centered on infection which constitutes the majority of nosocomial infections called MRSA. The data were collected between March 23 1998 and June 31 of the same year in a university hospital in the Kyongi Province, and is made up of a experimental group of 14 patients who were given nasal cavity smears and a control group of 16 patients who were not given nasal cavity smears. The data were analyzed through frequency and the Chi-square tests and gave forth these results. 1. Of the experimental group 28.6% developed nosocomial infections while 62.5% of the control group developed infections. This difference was significant. 2. In the experimental group, all of the patients developed infections within the first week in the ICU, while 80% of the control group developed infections in the first week and 20% in the second week. The difference was not as marked here. 3. In the experimental group the DM group 66.7% contracted MRSA while 18.2% developed it in the non-DM group showing that the DM group had infection rate was 3.7 times higher than the non-DM groups. In the control group the DM group had a 100% infection rate while 50% of the non-DM group developed it. Overall the DM group's rate infection was 2.4 times higher than the non-DM group. 4. In the experimental group, 37.55% of the patients who had a tracheostomy developed it while 16.7% of the patients who did not have a tracheostomy developed infections. In the control group, 62.5% of the patients who had tracheostomy, and 37.5% of the patients who did not have tracheostomies developed infections. Those who had tracheostomies, and the control group had double the rate contracting infections. From these results we can see that nasal cavity smears are effective against nosocomial infections. In spite of the smears, patients with the diabetes mellitus had a high MRSA infection rate, which requires new alternative treatments.

• The Journal of the Korean dental association
• /
• v.56 no.10
• /
• pp.548-554
• /
• 2018

Choristoma is a growth of normal tissue that occurs at an abnormal region. In the oral cavity, osseous choristoma that has a normal bone feature mainly has been appeared. It is mainly occurred on the tongue. So, It can be found in dental practice or in discomfort in the mouth. Osseous choristoma in the oral cavity is extremely rare. But It can be treated excisional biopsy under local anesthesia. The prognosis is very good. This case is a report of osseous choristoma on the dorsal surface of the tongue. A 17-year-old female patient presented with a foreign body sensation of the tongue. A diameter of the mass is 0.7cm, and there is no pain. Panoramic radiographs showed a radiopaque image in the form of a double image. An excisional biopsy was performed and diagnosed as an osseous choristoma. 12 months after the resection, there were no signs of recurrence. Intraoral osseous choristoma is very rare, but it is clinically very simple and can be found in dental radiographs. We present this case because of Dentists who examine the oral cavity of the patient can easily diagnose the lesion and treat it by simple resection.

• Journal of IKEEE
• /
• v.1 no.1 s.1
• /
• pp.1-10
• /
• 1997

It is well-known that rectangular bulk-Si sensors prepared by etch or epi etch-stop micromachining technology are already in practical use today, but the conventional bulk-Si sensor shows some drawbacks such as large chip size and limited applications as silicon sensor device is to be miniaturized. We consider a circular-shape SOI(Silicon-On-Insulator) micro-cavity technology to facilitate multiple sensors on very small chip, to make device easier to package than conventional sensor like pressure sensor and to provide very high over-pressure capability. This paper demonstrates the cross-functional results for stress analyses(targeting $5{\mu}m$ deflection and 100MPa stress as maximum at various applicable pressure ranges), for finding permissible diaphragm dimension by output sensitivity, and piezoresistive sensor theory from two-type SOI structures where the double SOI structure shows the most feasible deflection and small stress at various ambient pressures. Those results can be compared with the ones of circular-shape bulk-Si based sensor$^{[17]}. The SOI micro-cavity formed the sensors is promising to integrate with calibration, gain stage and controller unit plus high current/high voltage CMOS drivers onto monolithic chip.

• Journal of the Optical Society of Korea
• /
• v.7 no.3
• /
• pp.135-138
• /
• 2003

A chirped-pulse amplification femtosecond Ti:sapphire laser operating at 1 KHz has been developed. The laser system consisted of a long-cavity femtosecond oscillator, a four-pass grating pulse stretcher, two multi-pass amplifiers and a double-pass grating pulse compressor. Thermal lensing at the amplifiers was reduced by cooling Ti:sapphire crystals using Peltier coolers. Gain narrowing and residual phase errors were compensated for by the use of an acousto-optic pulse shaper. The final laser output had an energy per pulse of 2.0 mJ and a pulse duration of 19.5 fs, reaching 0.1 TW at 1 KHz.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.7
• /
• pp.24-31
• /
• 1999

Bulging is a forming method to shape of die cavity by using hydraulic pressure in tube or vessel. Bulging machine and die were developed in order to produce vessel for keeping warm. Bulging machine is a double type with two horizontal cylinders for bulging of two pieces at the same time. The developed die system has one bulging die and two drawing dies for necking at the both ends of tube. The diameter of tube expands by hydraulic pressure in tube. at the same time, thrust at the both ends of tube. pushes tube in the direction of expansion to obtain high expanding rate with no crack. In this study, the bulging properties were investigated to solve tube crack and necking in manufacturing vessel by the combination method of bulging and drawing. As a result, high expanding rate of tube radius without crack, precision necking and high productivity were obtained.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.9
• /
• pp.1229-1235
• /
• 1995

In this paper an elliptic response dual-mode 4-pole bandpass filter was designed, manu-factured, and tested. A dual-mode filter having two stages cascaded double-tuned cavities which are resonant in two independent orthogonal TE113 circular-cavity modes and provide a bandpass response. A 4-pole dual-mode elliptic function bandpass filter has a center frequency of 14.022 GHz with a bandwidth of 36 MHz which is the first channel of the KOREASAT up-link frequency. The measured experimental results of a dual-mode filter are 1 dB insertion loss in the passband and 20 dB out-of-rejection.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.4
• /
• pp.40-46
• /
• 2001

Bulging is a forming method to shape die cavity by using hydraulic pressure in tube or vessel. Bulging machine and die were developed in order to produce vessel for keeping warm. Bulging machine is a double type with two horizontal cylinders for bulging of two pieces at the same time. The developed die system has one bulging die and two drawing dies for necking at both ends of the tube. The diameter of tube expands by hydraulic pressure in tube. At the same time, thrust at both ends of the tube pushes tube in the direction of expansion to obtain high expansion rate with no crack. In this study, the bulging properties were investigated to solve tube crack and necking in manufacturing vessel by combining bulging and drawing. As a result, high expanding rate of tube radius without crack, precision necking and high productivity were obtained.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.339-342
• /
• 2008

본 논문에서는 이중 구조의 공동에서 작은 공동 전원단 내부에 존재하는 전자파원으로부터 방사되는 전자파를 내부 전원단의 개구를 지나 외부 공동의 개구를 통해 방사될 때, 내부 전원단의 위치와 외부 공동의 개구 위치 변화에 따른 방사 전자파의 크기를 FDTD법으로 검토하고 있다. 외부 공동 개구의 크기는 최대 방사 전자파의 주파수를 결정하며 내부 전원단의 위치를 조절하면 방사되는 전자파의 크기를 제어할 수 있음을 이론해석으로 통하여 확인하고 있다.