• 대한방사선기술학회지:방사선기술과학
• /
• 제46권6호
• /
• pp.501-508
• /
• 2023

This study used a adult absorption dose phantom (CIRS model 701-G, USA) made of human equivalent material and the vascular imaging equipment Allura Xper FD 20 (Philips, Netherlands). Optically stimulated luminescent dosimeters (OSLD) were inserted into the anatomical positions corresponding to each organ, and the exposure dose was measured. Dose area product (DAP) and air kerma (AK) measured by the dose meter in the equipment were compared. Continuous imaging was performed at two angles for a total of 20 minutes, with a frame per seconds of 3.75 and 7.5 fps and an FOV of 42 cm, 37 cm, and 31 cm, respectively, under the conditions of fluoflavor I, II, and III, each selected for 5 repetitions. This study was found that selecting a lower fps was the most effective way to reduce patient exposure dose, and adjusting the fluoflavor was a good alternative method for reducing patient exposure dose at high fps. Therefore the method of condition change with the greatest dose reduction effect is to set the minimum FPS and can reduce patient exposure dose according to geometric conditions and fluoflavor characteristics.

• 대한치과의사협회지
• /
• 제58권7호
• /
• pp.388-397
• /
• 2020

Objective: The purpose of the study was to calculate the effective and absorbed organ doses of cone-beam computed tomography (CBCT) in pediatric patient using personal computer-based Monte Carlo (PCXMC) software and to compare them with those measured using thermoluminescent dosimeters (TLDs) and anthropomorphic phantom. Materials and Methods: Alphard VEGA CBCT scanner was used for this study. A large field of view (FOV) (20.0 cm × 17.9 cm) was selected because it is a commonly used FOV for orthodontic analyses in pediatric patients. Ionization chamber of dose-area product (DAP) meter was located at the tube side of CBCT scanner. With the clinical exposure settings for a 10-year-old patient, DAP value was measured at the scout and main projection of CBCT. Effective and absorbed organ doses of CBCT at scout and main projection were calculated using PCXMC and PCXMCRotation software respectively. Effective dose and absorbed organ doses were compared with those obtained by TLDs and a 10-year-old child anthropomorphic phantom at the same exposure settings. Results: The effective dose of CBCT calculated by PCXMC software was 292.6 μSv, and that measured using TLD and anthropomorphic phantom was 292.5 μSv. The absorbed doses at the organs largely contributing to effective dose showed the small differences between two methods within the range from -18% to 20%. Conclusion: PCXMC software might be used as an alternative to the TLD measurement method for the effective and absorbed organ dose estimation in CBCT of large FOV in pediatric patients.

• Imaging Science in Dentistry
• /
• 제52권3호
• /
• pp.283-288
• /
• 2022

Purpose: This study was conducted to measure the radiation exposure and image quality of various cone-beam computed tomography (CBCT) machines under common clinical conditions and to analyze the correlation between them. Materials and Methods: Seven CBCT machines used frequently in clinical practice were selected. Because each machine has various sizes of fields of view (FOVs), 1 large FOV and 1 small FOV were selected for each machine. Radiation exposure was measured using a dose-area product (DAP) meter. The quality of the CBCT images was analyzed using 8 image quality parameters obtained using a dental volume tomography phantom. For statistical analysis, regression analysis using a generalized linear model was used. Results: Polymethyl-methacrylate (PMMA) noise and modulation transfer function (MTF) 10% showed statistically significant correlations with DAP values, presenting positive and negative correlations, respectively (P<0.05). Image quality parameters other than PMMA noise and MTF 10% did not demonstrate statistically significant correlations with DAP values. Conclusion: As radiation exposure and image quality are not proportionally related in clinically used equipment, it is necessary to evaluate and monitor radiation exposure and image quality separately.

• 대한방사선기술학회지:방사선기술과학
• /
• 제39권3호
• /
• pp.407-414
• /
• 2016

본 연구의 목적은 엑스선 선원과 검출기사이의 거리(SID)변화와 부가필터 사용 유무에 따른 피폭선량을 측정하여 환자선량을 최소화 하는 것이다. 연구를 위해 사용한 기기 및 팬텀은 DR시스템, 복부 조직 등가팬텀 그리고 알루미늄 필터를 사용하였다. 촬영 조건으로는 관전압을 80 kVp로 고정하고, 선량은 자동노출제어 장치를 통해 설정 하였다. 또한, 조사야는 $16{\times}16inch$를 사용하였다. 실험방법으로는 SID를 100 cm, 110 cm, 120 cm, 130 cm로 변화를 주어 각각 10회 측정하였고, 조사야 중심에 Piranha657 선량계를 위치시켰다. 촬영된 영상은 이미지J 통해 분석하였다. 실험 결과는 관전류량은 SID가 증가함에 따라 증가한 반면, 입사표면선량(ESD)은 SID가 증가함에 따라 급격히 감소하였다. 이는 낮은 에너지를 갖는 X선 광자들이 여과판사용으로 인해 제거되어 ESD의 감소로 기인한 것으로 사료되며, 이미지 J를 통한영상의 히스토그램 분석결과 SID 변화에 따라 ESD와 조사조건의 차이가 나타나지만 영상의 히스토그램상의 분포는 큰 차이는 없었다. 따라서, SID를 크게 할수록 환자의 선량을 줄일 수 있으며, 아울러 소아 등을 촬영할 때, 부가필터를 사용하면 환자선량을 더욱 줄일 수 있을 것이라 사료된다.