• Proceedings of the Korean Society of Crop Science Conference
• /
• 2018.04a
• /
• pp.119-119
• /
• 2018

• Bulletin of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.1017-1020
• /
• 2010

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.253-253
• /
• 2008

The main purpose of this study is to identify the vibrational characteristics for the LP blades of Korean standard fossil power plants. Modal tests for the 6 stage blade with boundary condition in which the root of blades are constrained with the disk were conducted, and FE analysis was also did with the same boundary condition. The steady-stress and modal analyses for the coupled bladed-disk system of LP turbine stages were completed. The dynamic analysis and fatigue analysis were followed to diagnose the integrity of LP turbine blades.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.10
• /
• pp.1972-1977
• /
• 2011

The mechanical integrity of generator stator windings is one of the critical point because the electric power is generated and conducted to power system through these windings. To cool down the heat emitted from generator winding during its operation, a majority of generators use de-mineralized water characterized by high cooling efficiency. Contrary to such the excellent cooling efficiency, however, the damaged bar insulations attributed to the absorption of cooling water in the generator stator winding lead to highly time- and cost consuming efforts as well as to service deterioration due to unexpected forced outage of generator. It is described that the new design of water absorption sensor using cross capacitance for generator in power plant in order to increase the reliability of water absorption diagnostics for generator stator bar insulation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.4
• /
• pp.493-498
• /
• 2011

This paper presents the GraphSLAM improved by selecting the measurement with respect to their likelihoods. GraphSLAM estimates the robot's path and map by utilizing the entire history of input data. However, GraphSLAM's performance suffers a lot from severely noisy measurements. In this paper, we present GraphSLAM improved by the selective measurement method. Thus the presented GraphSLAM provides higher performance compared with the standard GraphSLAM.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.300-302
• /
• 2014

발전기 출력의 약 60%을 담당하는 저압터빈의 케이싱은 복수기와 연결되어 있으며 외부케이싱과 내부 케이싱으로 구성되어 있다. 저압터빈 케이싱은 사용연수의 증가에 다른 경년열화로 인하여 터빈 기초 지지대의 침하, 케이싱 볼트의 느슨해짐 등 외부의 여러 가지 환경변화에 의하여 고유진동수가 저하된다. 본고에서는 우리나라 화력발전소 저압터빈 케이싱의 고유진동수 변화에 의하여 터빈 운전 주파수와 일치하는 공진현상이 발생하고 발전설비 운전 신뢰성에 영향을 미치고 있는데 이에 대한 원인 분석과 최소한의 비용으로 공진현상을 저감하고 운전 신뢰성을 확보한 사례에 대하여 기술한다

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.3059-3066
• /
• 2008

It is reported that the life of generator stator windings is expected about 30 years and a leak and water absorption phenomena can be progressed by fatigue, vibration, and corrosion. The water-cooled generator stator windings which were operated over 15 years are over 20 units and the mechanical problems such as leak and water absorption were found in the generator stator windings. In this paper, the systematic mechanical integrity evaluation methods which are applied to the water-cooled generator stator windings within the country are introduced.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.1
• /
• pp.29-35
• /
• 2010

This paper studies causes of the L-1 blade damage of a low pressure turbine, which was found during the scheduled maintenance, in 500 MW fossil power plants. Many failures of turbine blades are caused by the coupling of aerodynamic forcing with bladed-disk vibration characteristics. In this study the coupled vibration characteristics of the L-1 turbine bladed-disk in a fossil power plant is shown for the purpose of identifying the root cause of the damage and confirming equipment integrity. First, analytic and experimental modal analysis for the bladed-disk at zero rpm as well as a single blade were performed and analyzed in order to verify the finite element model, and then steady stresses, natural frequencies and corresponding mode shapes, dynamic stresses were calculated for the bladed-disk under operation. Centrifugal force and steady steam force were considered in calculation of steady and dynamic stress. The proximity of modes to sources of excitation was assessed by means of an interference diagram to examine resonances. In addition, fatigue analysis was done for the dangerous modes of operation by a local strain approach. It is expected that these dynamic characteristics will be used effectively to identify the root causes of blade failures and to perform prompt maintenance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.176-181
• /
• 2009

In this article, excitation forces due to unbalance mass in a flywheel energy storage system will be discussed, which mainly consists of a composite flywheel and active magnetic bearings and a motor/generator. Unbalance mass causes moments as well as centrifugal forces to the center of the flywheel when the flywheel rotates. The moment excites the flywheel to revolve in the shape of conical revolution and in real operation, the flywheel shows an aspect that conical revolution is a main mode when system failure occurs. Although there are several excitation sources to the flywheel including unbalance mass, an excitation from motor and control issues of the magnetic bearings, we could infer unbalance mass is the main cause of the failure from a comparison between a composite flywheel and a steel flywheel in the same condition. In this of view, excitation forces and moments induced by unbalance mass should be carefully considered in dynamics of the flywheel so that the energy storage system can be operated in more stable conditions.

• Korean Journal of Plant Resources
• /
• v.30 no.6
• /
• pp.670-678
• /
• 2017

Persimmon seeds contain considerable amounts of minerals, amino and organic acids, natural antioxidants and phenolic compounds. The objective of this study was to investigate quality characteristics and antioxidant potential of Korean persimmon seeds. The pH (4.88-4.94), color values, contents of minerals, free amino acids, organic acids, and phenolic compounds and DPPH free radical scavenging potentials of persimmon seed extracts significantly (p < 0.05) varied with the genotypes. This study showed that the seeds could be used as a source of different mineral elements (47.14-85.07 mg/kg) without any measureable amount of heavy metals such as arsenic, cadmium, lead and mercury. Similarly, considerable amounts of organic (1550.13-2413.08 mg/kg) and essential amino (50.85-54.03 mg/kg) acids and total phenolic compounds ($1227.91-1307.78{\mu}g$ gallic acid equivalent/g) were also found in the seed extracts, indicating their potential food value as a natural antioxidant. Results of the present study imply that prethanol-A, a food preservative, can be used as an effective extraction to obtain the minerals, organic and free amino acids, and phenolic compounds from the persimmon seeds, which possess a big potential to be commercially used in food, cosmetic and pharmaceutical industries.