• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.219-226
• /
• 1997

This paper investigates and analyzes the installation and failure status of mold transformer being used in domestic subways and describes the extinguishing process by time through the combustion test of winding part of mold transformer. Condition of installed mold transformers and classes of fire were surveyed and the mold transformer was burned in a horizontal heating furnace. It was confirmed that the mold transformer is self extinguishing and nonflammability. According to this results, the suitable standard of fire protection for the mold transformer was demanded after review of domestic and abroad law. It is expected that the cost of fire protection equipment can be reduced by using the status and combustion test result of mold transformer.

• Design & Manufacturing
• /
• 제2권6호
• /
• pp.17-22
• /
• 2008

Recently, the demand of high-productivity injection mold increases since the consumption of packaging grows in the world. Stack mold is composed of more than two molds and it has very high productivity and economic efficiency. In advanced country, stack mold which has was developed already but, in occasion of domestic mold industry, there is no study of stack mold. In this study, die and mold of in-mold labeling was developed for securing the technique of manufacturing high-productivity mold.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.575-576
• /
• 2006

Recently, the demand of high-productivity injection mold increases since the consumption of packaging grows in the world. Stack mold is composed of more than two molds and it has very high productivity and economic efficiency. In advanced country, stack mold which has $4Level{\times}96cavity$ was developed already but, in occasion of domestic mold industry, there is no study of stack mold. In this study, stack mold which has $2Level{\times}4cavity$ is developed for securing the technique of manufacturing high-productivity mold.

• 벤처혁신연구
• /
• 제7권1호
• /
• pp.111-130
• /
• 2024

본 연구는 국내의 금형 관련 기업체에 근무하는 종사자들을 대상으로 직무만족을 매개로 하여 셀프리더십이 조직몰입에 영향을 미치는지를 규명하는 것에 그 목적이 있다. 국내의 금형 관련 기업체에 근무하는 종사자들을 대상으로 3개월의 기간 동안 설문지를 온라인으로 표집 하였다. 응답한 설문지는 총 209부로 모두 최종 분석에 사용하였으며, 측정도구는 셀프리더십, 조직몰입, 직무만족으로 설문지를 구성하여 사용하였다. 통계분석은 SPSS 21.0 프로그램으로 실시 하였다. 국내의 금형 관련 기업체에서 근무하는 종사자들의 조기이직 문제와 직무역량 향상을 위해서 셀프리더십이 조직몰입 및 직무만족에 미치는 영향과 직무만족을 매개로 하여 셀프리더십이 조직몰입에 영향을 주는지 검증하였다. 검증결과 셀프리더십은 조직몰입과 직무만족에 유의한 영향을 미쳤으며, 직무만족은 셀프리더십과 조직몰입간에 완전매개효과가 있음을 증명 하였다. 이것은 셀프리더십이 강하고, 직무만족이 높을수록 조직몰입에 미치는 영향이 크다는 것을 입증 하였다. 이로서 기업이나 협회에서 금형관련 종사자를 대상으로 셀프리더십 교육을 시행할 수 있는 토대를 마련하였다.

• 실내환경 및 냄새 학회지
• /
• 제16권1호
• /
• pp.47-53
• /
• 2017

Mold is one of the important bio-aerosols affecting human health in the indoor environment. To manage mold contamination, it is necessary to use an appropriate method for its detection and enumeration. Recently, the impaction method of ISO 16000-18 has been established as one of methods to detect and enumerate molds in air. To investigate the general use of the impaction method for mold detection in domestic indoor environments, the suitability of the method was assessed using different antibiotics, media and air samplers. All of the three antibiotics tested - ampicillin, chloramphenicol and streptomycin - showed inhibitory effects on bacterial colony formation on MEA and DG-18 media, without inhibiting mold growth. Of these three antibiotics, ampicillin was the most effective. There was no statistical difference between MEA and DG-18 media in the measurement of mold concentration. The formation of discriminative colony morphology was more apparent in DG-18 media. No significant difference in the measurement of mold concentration was found between Andersen samplers and MAS-100NT samplers, which are two major samplers introduced in Korea.

• Design & Manufacturing
• /
• 제11권1호
• /
• pp.39-44
• /
• 2017

The domestic mold industry is composed of 6,560 small and medium sized mold companies as of 2015. The structure of mold industry centered on less than 10 people in the past has been improved in the direction of increasing number of medium and large scale companies with more than 20 competitors with global competitiveness and has maintained its position as the world's second largest mold exporter with global competitiveness. Nevertheless, the manpower structure and corporate competitiveness structure of the mold industry is very high, with the proportion of production manpower reaching 70% and shortage rate of 10% or more in order to respond to the orders of customers. However, the development base for new employees with technological skills required by the industrial field is poor, and the inflow of young people is very limited due to factors such as the avoidance of small and medium enterprises and production jobs. It is expected that the labor shortage of mold enterprises will be further increased in the future. In the mold industry, due to the characteristics of small quantity multi-product production corresponding to the demand of the consumer, many production processes are individually and independently carried out, resulting in low labor productivity, and the structural time required for the worker to increase the working time Due to limitations, the working hours per week of the employees are about 50 hours. The implementation of the working time reduction bill, which is recently promoted by the government, is a crisis factor. In order to cultivate the mold industry, it is necessary to expand the base of molds to meet the intensification of global competition, the convergence of technologies to actively respond to the restructuring of the industrial structure, and the response to the new industry, It is necessary to improve labor productivity through policies such as development and dissemination of system, and to secure price, delivery and quality competitiveness in global market.

• Design & Manufacturing
• /
• 제8권1호
• /
• pp.5-9
• /
• 2014

This study is about 3D design for parts supporting copper pipes of wall-mounted air-conditioners manufactured by company "D" in Japan. Domestic press die manufacturers are obsessed with 2D die design and are afraid of taking risk with developing 3D die design and die manufacture. This hinders paradigm shift. In this study, the strip layout, which was already completed in the previous study, is altered by adding restriking. Based on the modified strip layout, the 3D die design is done in 15 processes.

• Design & Manufacturing
• /
• 제2권4호
• /
• pp.24-31
• /
• 2008

The productive products are required diversification of product development and advanced for competitiveness. A lot of methods to fix architecture wrapping panels and stone materials are developed in domestic area very much. In this paper, it is very important that a fixing device of slate and molds were developed to reduce the production cost and improve safety. Therefore new model was suggested to reduce manufacturing cost and structure design and FEM analysis were performed to manufacture die press dies for mass production.

• 한국주조공학회지
• /
• 제4권2호
• /
• pp.102-107
• /
• 1984

The variations of the mold compression strength were studied by varing the contents of the silicon powder and water glass, silion purities, and molecule rates of the water glass, when domestic JA EUN DO sand is mixed with water glass (sodium silicate) and metallic silicon or ferro - silicon powder by the self - hardening N - PROCESS method. The results obtained from this experiment are as follows; 1) The compression strength of the mold used with metalic powder was higher and more stable than to be used ferro - silicon powder. 2) 6% water glass of 2.8 molecule rate and 1.5% of ferro - silicon of 75% purity for the N - PROCESS used with JA EUN DO sand was suitable mixing rate. 3) The compression strength increased with self - hardening time, and the PH values of the mixture of silicon powder and water glass did not change after 2 hours, but the compression strength increased steadily due to the reaction of remained silicon. 4) It is recommended to take 24 hours for self - hardening time at least.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.269-274
• /
• 2001

This research covers the development of new technique for composite injection molding of high stiffness Sabot. An analysis of polymer resin is performed by means of making test specimen mold and doing test with accordance of ASTM test guidelines. Structural analysis and simulation of injection molding process are carried out in order not only to estimate but also to predict the characteristics of molding stresses what both product and structure of mold may have. For structural analysis software, Moldflow and LS-dyna are used and universal test machine is utilized for evaluating performance of sabot. Cases of adopting this material to sabot are not announced yet in domestic academic world. In addition to that, materials for polymer-metal mixed injection molding are imported on the whole due to deficient level of domestic technology. Therefore, this new developed injection molding technique using PEI material can make it available to ensure the technology of making mold, injection and design. Finally, this technique may be applicable to another sabot having different radius of warheads from now on.