• Korean Journal of Food Science and Technology
• /
• v.31 no.5
• /
• pp.1363-1370
• /
• 1999

This study was performed to investigate the average molecular weight range of chitosan hydrolysates showing maximum effect in macrophage activation. Nitrite production by continuous macrophage cell line J774A.1 was the highest at $10\;{\mu}g/ml$ concentration of intact chitosan. Hydrogen peroxide production by J774A.1 showed the high value of $894\;{\mu}M/mg$ macrophage protein at $1,000\;{\mu}g/ml$ concentration of chitosan hydrolysate fraction 5 and $1,044\;{\mu}M/mg$ macrophage protein at $100\;{\mu}g/ml$ concentration of the fraction 6. Chitsan hydrolysate fraction 4, fraction 6 and intact chitosan enhanced $IL-1{\alpha}$ production, while the others did not. The production of tumor necrosis factor showed the high value at $1,000\;{\mu}g/ml$ concentration of chitosan hydrolysate fraction 4, $100\;{\mu}g/ml$ concentration of the fraction 5 and fraction 6, and $10\;{\mu}g/ml$ concentration of intact chitosan. In conclusion, fractions 4, 5 and 6 of the chitosan hydrolysatets with average molecular weight of $24,000{\sim}64,000$ calculated by HPLC analysis are the most effective in macrophage activation tested in this study.

• Journal of Korea Foundry Society
• /
• v.43 no.6
• /
• pp.279-285
• /
• 2023

In order to predict the mechanical properties of ductile cast iron heat treated in an intercritical temperature range, samples machined from cast iron with a tensile strength of 450 MPa were heat-treated at various intercritical temperatures and air-cooled, after which a microstructural analysis and Brinell hardness test were conducted. As the heat treatment temperature was increased in the intercritical temperature range, the ferrite fraction in the ductile cast iron decreased and the pearlite fraction increased, whereas the nodularity and nodule count did not change considerably from the corresponding values in the as-cast condition. The Brinell hardness values of the heat-treated ductile cast iron increased gradually as the heat treatment temperature was increased. Based on the measured alloy composition, the fraction of each stable phase and the hardness model from the literature, the hardness of the ductile cast iron heat treated in the intercritical temperature range was calculated, showing values very similar to the measured hardness data. In order to check whether it is possible to predict the hardness of heat-treated ductile cast iron by using the phase fraction obtained from thermodynamic calculations, the volumes of graphite, ferrite, and austenite in the alloy were calculated for each temperature condition. Those volume fractions were then converted into areas of each phase for hardness prediction of the heat-treated ductile cast iron. The hardness values of the cast iron samples based on thermodynamic calculations and on the hardness prediction model were similar within an error range up to 27 compared to the measured hardness data.

• Journal of Energy Engineering
• /
• v.17 no.1
• /
• pp.38-45
• /
• 2008

In this work, we investigated the variation of physical and chemical characteristics of solvent-insolubles and solvent-solubles in Canada's Athabasca oil sands by solvent-insolubles experiments. N-Heptane, n-Hexane, and n-Pentane were tested for solvents and asphaltenes were separated from maltenes by using a modified ASTM D 3279 method. Elemental analysis, boiling point distribution (SIMDIS), molecular weight distribution, heavy metal contents, API gravity, viscosity and SARA fractions were measured for thorough samples. The asphaltenes-removed maltenes contained less sulfur and heavy metal amounts and had lower molecular weight than the original bitumen. N-Pentane solvent could lower sulfur and heavy metal amounts, molecular weight, and viscosity of maltenes compared to the other solvents. Eventually, we confirmed that the obtained experimental data could be used as basic informations of bitumen upgrading processes for the production of SCO (synthetic crude oil).

• Journal of the Korean earth science society
• /
• v.24 no.8
• /
• pp.711-720
• /
• 2003

To study characteristics of the heavy metal pollution, sediment samples were collected at 67 sites on the roadside of Jeonju city during summer and winter, 2002. The total concentration of metals including Cd, Co, Cr, Cu, Ni, Pb, Zn, and Mn in the sediment samples were determined. The results indicate that the roadside sediments in Jeonju city have lower (1/2 to 1/7 times) concentrations of Zn, Cu, Pb and Cd than the metal concentrations previously reported for roadside soil, dust and sewage sludges in Seoul. However, the metal concentrations are higher than environmental quality criteria in soil suggested from several countries, and Zn, Cu, Pb and Cd contents are usually 2-7 times higher than the world average contents of the metals in natural soil. Although pollution index and concentrations of Cr, Ni, Pb and Zn in the roadside sediments at industrial area were usually higher than those of downtown and residential area, the metal having small vehicle- and steel-related industries had high concentrations of metals. The results of chemical partitioning analysis showed that Pb, Zn and Mn are mainly associated with carbonate/adsorbed and Fe-Mn oxide phases but that Cu is largely associated with the organic and sulfide fractions. It thus indicates that both large and small (vehicle- and steel-related) industries are main sources of heavy metal contamination. Due to high solubility of the carbonate phases by natural leaching episodes, the carbonate/adsorbed Cd, Co, Ni, Pb, Zn and Mn in the roadside sediments may serve as a potential source of contamination.

• Radiation Oncology Journal
• /
• v.7 no.2
• /
• pp.171-183
• /
• 1989

A general effect for cell proliferation has been incorporated into Roesch's survival equation (Accumulation Model). From this an isoeffect formula for the low dose-rate regimen is obtained. The prediction for total doses equivalent to 60Gy delivered at the constant dose-rate over 7 days agrees well with the dose-time data of Paterson and of Green, when the parameter ratio A/B (${\approx}{\alpha{\mu}}/2{\beta}\;where\;{\mu}$ is the repair rate) is chosen to be 0.7Gy/h. When a constant proliferation rate and known facts of division delay are assumed, an isoeffect relation between low dose-rate treatment and acute dose-rate treatment can be derived. This formula in the regimens where proliferation is negligible predicts exactly the data of Ellis that 8 fractions of 5 Gy/day for 7 days are equivalent to continuously applied 60Gy over 7days, provided the A/B ratio is 0.7 Gy/h and the $\alpha/\beta$ ratio is 4Gy. Overall agreement between the clinical data and the predictions made by the formula at the above parameter values suggests that the biologcal end points used as the tolerance level in the studies by Paterson, Green, and Ellis all agree and they are not entirely the early effects as generally assumed. The absence of dose-rate effects observed in the mouse KHT sarcoma can better be explained in terms of a large value for the A/B ratio. Similarly, the same total dose used independently of the dose-rate to treat head and neck tumors by Pierquin can be justified.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.3
• /
• pp.361-367
• /
• 2008

This study examined the physicochemical properties of rice embryo in order to investigate the antioxidative effect of black rice bran pigment fraction on rice embryo lipid oxidation. Color stability of rice bran pigment fraction and acid value of added rice embryo were determined at various conditions of pH, temperature, and storage time. Rice embryo contained more crude protein (22.1%) compared to the rice bran (9.4%). However, rice embryo had a higher lipid content than rice bran, causing lipid oxidation during storage. Pigment fraction were relatively stable in acidic pH of 3.0 stored at $4^{\circ}C$ for 9 days. Rice embryo showed increased acid value with increased storage time and temperature. Furthermore, rice embryo with pigment fraction resulted in lower acid value compared to the control group. Therefore, addition of black rice bran pigment fractions to rice embryo improved storage capacity.

• Journal of Korea Water Resources Association
• /
• v.42 no.10
• /
• pp.845-855
• /
• 2009

In this study, changing characteristics of bed materials downstream of Daecheong Dam by flushing flow was investigated. Flushing flow affected the downstream environment in such a way that the mean diameter of bed material was increased and the standard deviation was decreased. The vertical sorting of bed materials composed of mixed sediment in the sediment box was observed. The surface layer was composed of gravels, and uniform sand material was buried below it. Relative fractions (Di/D50) of the bed material trapped in the box was nearly 1.0 for the bed material coarser than D$_{50}$ at Hyundo gauging station, and was between two values on the bed surface before and after the flushing flow at Bugang gauging station. Ratio of driving force to resisting force for each fraction ($\tau_i^*$) with the faction size maintained constant for the bed material coarser than D$_{50}$ at Hyundo station. At Bugang station, however, it was rapidly decreased. It means that pavement of the surface layer of bed material at Bugang station was developed, with the sediment particles moving downstream uniformly by flushing flow.

• Education of Primary School Mathematics
• /
• v.20 no.3
• /
• pp.205-224
• /
• 2017

A model method has been known as the main characteristic of Singaporean elementary mathematics textbooks. However, little research has been conducted on how the model method is employed in the textbooks. In this study, we extracted contents related to the model method in the Singaporean elementary mathematics curriculum and then analyzed the characteristics of the model method applied to the textbooks. Specifically, this study investigated the units and lessons where the model method was employed, and explored how it was addressed for what purpose according to the numbers and operations. The results of this study showed that the model method was applied to the units and lessons related to operations and word problems, starting from whole numbers through fractions to decimals. The model method was systematically applied to addition, subtraction, multiplication, and division tailored by the grade levels. It was also explicitly applied to all stages of the problem solving process. Based on these results, this study described the implications of using a main model in the textbooks to demonstrate the structure of the given problem consistently and systematically.

• Applied Biological Chemistry
• /
• v.35 no.6
• /
• pp.449-456
• /
• 1992

Expermient were conducted to determine the effect of phosphorus stress on bacteroid content and energy status of soybean (Glycine max [L.] Merr.) nodules. Plants inoculated with Bradyrhizobium japonicum MN 110 were grown with P-stressed (0.05 mM-P) and control (1 mM-P) treatment in the greenhouse. Phosphorus stress decreased nodule mass per plant and nodule mass to whole plant mass ratio. Phosphorus concentration in leaf, stem and root tissues were reduced by 75% but in nodule tissue was reduced only by 40% under phosphorus stress during 3 week experimental period. The bacteroid content per unit nodule mass and the distribution of total nitrogen and total phosphorus among the bacteroid and plant cell fractions of nodule were not affected significantly by phosphorus stress. Regardless of phosphorus treatment, 22% of the nitrogen and 27% of the phosphorus in whole nodules were associated with the bacteroid fraction. The ATP and total adenylate concentrations in and energy charge of whole nodule were decreased 77%, 46% and 37%, respectively, by phosphorus stress. The ATP concentration in and energy charge of the host plant cell fraction of nodules were decreased 86% and 59%, respectively, but these parametres in bacteroid in nodules were not affected by phosphorus stress. These results indicated that nodule is a strong phosphorus sink and that nodule growth and development are regulated to maintain a high phosphorus and energy content in bacteroid even when the host plant is subjected to phosphorus deficiency.

• Journal of Life Science
• /
• v.16 no.5
• /
• pp.834-839
• /
• 2006

This study was carried out to investigate changes in cell wall components and solubilization and depolymerization of pectin and neutral sugar polymers during softening of 'Tsugaru' apples. Pectic polysaccharides were solubilized in different solvents, distilled-water, 0.05 M CDTA, 0.05 M $Na_2CO_3$, and 8 M KOH, from cell wall materials during fruit softening. The uronic acid contents in distilled-water fraction rapidly increased along with fruit softening at 4 weeks after ambient storage. In the change of non-cellulosic neutral sugars in the cell wall of ‘Tsugaru’ fruits, the major sugar was galactose and arabinose in distilled-water, 0.05 M CDTA and 0.05 M $Na_2CO_3$ soluble fractions, and it was glucose, galactose and xylose in 8 M KOH fraction. Especially the change of galactose contents in distilled-water fraction was increased greatly along with fruit softening. When uronic acid polymers (UAP) and carbohydrate polymers (CP) in distilled-water fraction were filtered and separated using Sepharose CL-2B column, the high molecular UAP and CP were degraded to the low molecular ones from at harvest to softening fruit. Thus, the amount of high molecular polymers were greatly decreased along with fruit softening.