• Steel and Composite Structures
• /
• v.49 no.6
• /
• pp.667-684
• /
• 2023

In the context of finite element method, a computational simulation is presented to study and analyze the dynamic behavior of regularly perforated functionally graded rotating beam for the first time. To investigate the effect of perforation configurations, both regular circular and squared perforation patterns are studied. To explore impacts of graded material distributions, both axial and transverse gradation profiles are considered. The material characteristics of graded materials are assumed to be smoothly and continuously varied through the axial or the thickness direction according the nonlinear power gradation law. A computational finite elements procedure is presented. The accuracy of the numerical procedure is verified and compared. Resonant frequencies, axial displacements as well as internal stress distributions throughout the perforated graded rotating cantilever beam are studied. Effects of material distributions, perforation patterns, as well as the rotating beam speed are investigated. Obtained results proved that the graded material distribution has remarkable effects on the dynamic performance. Additionally, circular perforation pattern produces more softening effect compared with squared perforation configuration thus larger values of axial displacements and maximum principal stresses are detected. Moreover, squared perforation provides smaller values of nondimensional frequency parameters at most of vibration modes compared with circular pattern.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.3
• /
• pp.169-175
• /
• 1996

In this paper, a new parallel neural network system that performs dynamic competitive learning is proposed. Conventional learning mehtods utilize the full dimension of the original input patterns. However, a particular attribute or dimension of the input patterns does not necessarily contribute to classification. The proposed system consists of parallel neural networks with the reduced input dimension in order to take advantage of the information in each dimension of the input patterns. Consensus schemes were developed to decide the netowrks performs a competitive learning that dynamically generates output neurons as learning proceeds. Each output neuron has it sown class threshold in the proposed dynamic competitive learning. Because the class threshold in the proposed dynamic learning phase, the proposed neural netowrk adapts properly to the input patterns distribution. Experimental results with remote sensing and speech data indicate the improved performance of the proposed method compared to the conventional learning methods.

• Genomics & Informatics
• /
• v.4 no.4
• /
• pp.173-181
• /
• 2006

Pattern finding is one of the important tasks in a protein or DNA sequence analysis. Alignment is the widely used technique for finding patterns in sequence analysis. BLAST (Basic Local Alignment Search Tool) is one of the most popularly used tools in bio-informatics to explore available DNA or protein sequence databases. BLAST may generate a huge output for a large sequence data that contains various sequence patterns. However, BLAST does not provide a tool to summarize and analyze the patterns or matched alignments in the BLAST output file. BLAST lacks of general and robust parsing tools to extract the essential information out from its output. This paper presents a pattern summary system which is a powerful and comprehensive tool for discovering pattern structures in huge amount of sequence data in the BLAST. The pattern summary system can identify clusters of patterns, extract the cluster pattern sequences from the subject database of BLAST, and display the clusters graphically to show the distribution of clusters in the subject database.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.231-232
• /
• 2008

The effect of n-electrode patterns on the current distribution in active region is investigated in GaN-based blue vertical light emitting diodes (VLEDs). A 3-dimension circuit model is adopted to analyze the current flow patterns in VLEDs. We had fabricated VLEDs having different n-electrode patterns, measured their current-voltage characteristics, and compared to the numerical simulation. It turns out that the current spreading in VLEDs is strongly dependent on the n-electrode pattern. Some design guidelines for n-electrode patterns to produce uniform current injection are presented.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.5
• /
• pp.54-59
• /
• 2012

In order to have the high efficiency of aircraft wing and to improve the energy efficiency in field of eco-friendly transportation, the performance characteristics of the aircraft wing were studied with the change of lift to drag ratio through the CFD analysis. The design process was focused on generating the high lift force and low drag force as the lift to drag ratio was increased. In this paper, various dimple patterns were numerically designed to investigate the flow characteristics. Hexagon-and circle-shaped dimples, dimple distance and position were changed as the artificial conditions. The numerical analyses were conducted by using the commercial code, ANSYS CFX. Numerical results dependent on the turbulence intensity and lift to drag ratio distribution were graphically depicted for various dimple patterns.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.15 no.3
• /
• pp.283-291
• /
• 1986

An experimental study has been conducted to investigate characteristics of the flow patterns, its transitions and the mean local void fraction obtained from which the probe was traversed diametrically from center to wall of the test section in the vertical upward air-water flow for isothermal condition using the electrical conductivity probe. It has been shown that the probability density function of the mean local void fraction measured statistically from a Fast Fourier Transform becomes a criterion for the flow patterns and the mean local void fraction profile is a highly function of the flow patterns.

• Journal of Distribution Science
• /
• v.3 no.1
• /
• pp.91-111
• /
• 2005

As the environments of world economy have been changed so rapidly, the conditions of marketing and distribution also have been altered. In korea distribution industry has been changed according to the introduction of various patterns of distribution and marketing. Among them the emerging of network marketing, same meaning with multi-level marketing in this research, is a important phenomenon of distribution industry in Korea. Not only it contributes the progress of national economy, especially distribution industry, but also it includes some limitations and criticism from the dissenters. In this paper, the clear definitions and characteristics of network marketing are suggested. And the current situations of network marketing in this country has been analyzed and compared, The future perspectives and problems of this network marketing have been diagnosed and classified for the future development and contribution for national economy. The various alternatives for the future development of network marketing have been studied and suggested in terms of each role of this industry such as distributers, consumers and government. Though this paper has a small contribution, it contains many limitations for research. Therefore it suggest future directions for further research.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.1
• /
• pp.67-76
• /
• 2008

Implant requires long lasting, strong osseointegration using bio-mechanical interlocking by bone ingrowth. In regarding the size level for bone ingrowth, the micro-patterning would enhance bone response. Micro-patterning can increase the area contacting the bone tissues. Therefore, it may distribute the load to the surrounding bone tissue, more effectively. This study compared and analyzed the load distributing effect with the shape and number of micro-patterning. For the optimal comparison of threads, the assumptions different from general finite element analysis model were made. It was assumed that the implant was axisymmetric and infinitely long. The implant was assumed to be completely embedded in the infinitely long cortical bone and to have 100% bone apposition. The implant-bone interface had completely fixed boundary conditions and received an infinitely big axial load. The condition of threads were as follows. The reference model 1 had conventional thread. Model 2 had 2 micro-patterns on the upper flank of the thread. Model 3 had 2 micro-patterns on the lower flank of the thread. Model 4 had 2 micro-patterns on the upper and lower flanks of the thread. Model 5 had 3 micro patterns on the upper and lower flanks of the thread. The results were as follows: 1. The thread with micro-patterns distributed stress better than the conventional thread. 2. The thread with micro-patterns on the lower flank distributed stress better than that with micro-patterns on the upper flank. 3. The thread with 3 micro-patterns distributed stress better than that with 2 micro-patterns, However, an area with stress concentration occurred.

• The Journal of the Korea Contents Association
• /
• v.10 no.12
• /
• pp.91-100
• /
• 2010

To understand the trip patterns of subway passengers is very important to making plans for an efficient subway system. Accordingly, there have been studies on mining and classifying useful patterns from large smart card transaction databases of the Metropolitan Seoul subway system. In this paper, we define a new classification of subway trip patterns and devise a classification algorithm for eleven trip patterns of the subway users from smart card transaction databases which have been produced about ten million transactions daily. We have implemented the algorithm and then applied it to one-day transaction database to classify the trip patterns of subway passengers. We have focused on the analysis of significant patterns such as round-trip patterns, commuter patterns, and unexpected interesting patterns. The distribution of the number of passengers in each trip pattern is plotted by the get-on time and get-off time of subway transactions, which illustrates the characteristics of the significant patterns.

• Journal of Ecology and Environment
• /
• v.30 no.4
• /
• pp.331-340
• /
• 2007

We examined the evolutionary and ecological processes shaping current geographical distributions of a Korean wood-eating cockroach species, Cryptocercus kyebangensis. Our research aims were to understand evolutionary pattern of DNA sequences, to construct genetic network of Cryptocercus kyebangensis local populations and to understand evolutionary and ecological processes shaping their current geographical distribution patterns via DNA sequence information and genetic networks, using sequence data of two genes (ITS-2 and AT region) from local populations of C. kyebangensis. The results suggest that the ITS-2 and AT region are appropriate molecular markers for elucidating C. kyebangensis geographic patterns at the population level. The MSN-A based on the ITS-2 showed two possible routes, the Hwaak-san and Myeongji-san route and the Seorak-san and Gyebang-san route, for migration of ancestral C. kyebangensis into South Korea. The MSNs (MSN-A and -B) elucidate migration routes well within South Korea, especially the route of Group I and Group II.