• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.6
• /
• pp.290-295
• /
• 2002

The present assignment in installing the number of switches for distribution line was made on the basis of a normal feeder capacity 7,000kVA in KEPCO(Korea Electric Power Corporation), Korea. But the normal capacity is revised to 10000kVA in 1998. Even increasing limit of the operating capacity of the distribution lines enables us to give some benefit for the operation flexibility and investment cost of the distribution system. It is disadvantageous in the viewpoint of supply reliability. In distribution systems, switches are equipped to improve the reliability of distribution systems by minimizing the outage section due to fault and maintenance. Utility generally improves the reliability by minimizing the length of outage section, which is caused by fault and maintenance, through switch equipment on distribution system. In order to cope with the changes such as operation capacity, it is necessary to study whether the present criteria is reasonable or not, also to confirm whether the present criteria of installing switches in line is improved or not. In this study, we proposes the number of switch per feeder on the basis of present operation capacity in distribution system.

• Proceedings of the Korean Statistical Society Conference
• /
• 2000.11a
• /
• pp.109-113
• /
• 2000

We consider the probability that the total population of a Jackson network exceeds a given large value. By using the relation to the stationary distribution, we derive upper and lower bounds on this probability. These bounds imply the stronger logarithmic limit than that in Glasserman and Kou(1995) when several nodes have the same maximal load.

• Korean Journal of Mathematics
• /
• v.11 no.1
• /
• pp.35-43
• /
• 2003

We study the weak convergence to Fractional Brownian motion and some examples with applications to traffic modeling. Finally, we get loss probability for queue-length distribution related to self-similar process.

• Journal of Plant Biology
• /
• v.28 no.4
• /
• pp.297-304
• /
• 1985

Two Korean species of Centroceras K tzing, Ceramiaceae was investigated taxonomically. C. clavulatum (Ag.) Montagne collected at several sited along the coast of Korea was characterized by regular dischotomous branches with whorl spines at every node, whereas, C. distichum Okamura collected at Soando in the southern coast was by alternate branches with gland cells around nodes. Biogeographic data show that Korea is almost northern limit in distribution of the former species.

• The Korean Journal of Ecology
• /
• v.24 no.6
• /
• pp.377-380
• /
• 2001

Herbivory is an important selective forces on plants by reducing the ability of the plant to compete with its neighbors and to produce offspring. Oak nut weevil(Mechoris ursulus Roelofs) females lay eggs in unmatured acorns and cut off the branch of oviposited acorns. To investigate the influences of branch-cutting behavior of oak nut weevils on oak production, we surveyed the horizontal and vertical distribution ranges of damaged oaks and depth of sites of overwintering larvae and quantified the amounts of biomass and acorn removed by the weevils on deciduous oak species. All of the endemic oak species in Korea were damaged by oak nut weevils in all of the study sites including Mt. Halla and Mt. Seorak. The upper limit of vertical distribution of damaged oaks by the weevils raried from 700 m to 900 m. Mostly their larvae were found in soil from 8.1 cm to 10.0 cm depth in winter. Percentage of annual net primary productivity($720g{\cdot}m^{-2}{\cdot}day^{-1}$) of oak species removed by the weevils was about 7%, which is higher than the percentage removed by all the herbivores in typical temperate forest(5%) and equivalent to that by all the herbivores in tropical forest. The predation percentage of annual acorn production by oak nut weevil was 27% in Q. mongolica and 33% in Q. acutissima. This results indicate that the branch-cutting behavior of oak nut weevil may be the most important factor regulating oak population and affecting other predators dependent on acorns.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.2
• /
• pp.336-344
• /
• 2002

In this study, the flow and combustion characteristics of flat flame burner with twirler were investigated. There are several factors that define the characteristics of burner. Among them, the experiments was focused on swirl effect by four types of twirler in terms of flow structure, distribution of temperature and emission characteristics. In PIV(Particle Image Velocimetry) experiment, the less of swirl number, axial flow is dominant at the center. As swirl number increases, the flow develops along the burner tile and backward flow becomes stronger at center. From the combustion characteristics, as long as combustion load increases, blow-off limit was improved. But at the higher swirl number, the limit is decreased. At swirl number 0, the temperature is shown typical distribution of long flame burner. but swirl number increases, the temperature distribution is uniform in front of round tile. Therefore, the temperature distribution is coincided with flow structure. As excess air ratio increases, NO concentrations are high. But high swirl number gives rise to become low NO concentrations. The flame characteristics are comprised in wrinkled laminar-flame regime according to turbulence Reynolds number(Rel) and Damkohler number(Da).

• Earthquakes and Structures
• /
• v.16 no.5
• /
• pp.563-573
• /
• 2019

When generating spectrum-compatible artificial ground motion in engineering practices, the effect of the variation in fitting parameters on the distribution of the peak ground displacement (PGD) has not yet drawn enough attention. In this study, a method for simulating ground motion matching for multiple targets is developed. In this method, a frequency-dependent amplitude envelope function with statistical parameters is introduced to simulate the nonstationarity of the frequency in earthquake ground motion. Then, several groups of time-history acceleration with different temporal and spectral nonstationarities were generated to analyze the effect of nonstationary parameter variations on the distribution of PGD. The following conclusions are drawn from the results: (1) In the simulation of spectrum-compatible artificial ground motion, if the acceleration time-history is generated with random initial phases, the corresponding PGD distribution is quite discrete and an uncertain number of PGD values lower than the limit value are observed. Nevertheless, the mean values of PGD always meet the requirement in every group. (2) If the nonstationary frequencies of the ground motion are taken into account when fitting the target spectrum, the corresponding PGD values will increase. A correlation analysis shows that the change in the mean and the dispersion values, from before the frequencies are controlled to after, correlates with the modal parameters of the predominant frequencies. (3) Extending the maximum period of the target spectrum will increase the corresponding PGD value and, simultaneously, decrease the PGD dispersion. Finally, in order to control the PGD effectively, the ground motion simulation method suggested in this study was revised to target a specified PGD. This novel method can generate ground motion that satisfies not only the required precision of the target spectrum, peak ground acceleration (PGA), and nonstationarity characteristics of the ground motion but also meets the required limit of the PGD, improving engineering practices.

• Industrial Engineering and Management Systems
• /
• v.13 no.3
• /
• pp.297-303
• /
• 2014

Stock pre-positioning is one of the most important decisions for preparing the stage of emergency logistics planning. In this paper, a mixed integer model for stock pre-positioning is derived to support an emergency disaster relief response against the event of earthquake. A maximum response time limit, budget availability, multiple item types, and capacity restrictions are considered. In the model, the decision of the distribution centers to cover a disaster area and the amount of supplies to be stocked in each distribution center are simultaneously determined to maximize the total expected relief demand of the disaster areas covered by the existing distribution centers. The proposed model is applied to a real case with 33 disaster areas and 16 distribution centers in Indonesia. Several sensitivity analyses are conducted to estimate the fluctuation on the emergency stock pre-positioning planning by changing the maximum response time and budgets.

• The Mathematical Education
• /
• v.39 no.2
• /
• pp.167-177
• /
• 2000

In this thesis we concerned with the degree of similarity in pairs of scores having a common mean and variance could express similarity in terms of the absolute difference between the standardized scores. We particulary discussed the distribution of absolute differences between pairs of T scores among many standardized scores and demonstrated the procedures for calculating the lower limit of Med(│d│) values i. e. the maximum possible similarity with medians and correlation coefficients of the equivalent form tests by using the folded normal distribution, although other researchers expressed the degree of similarity using only the standard normal distribution. We also described many cases how to use those techniques and to apply effectively them in real evaluation fields.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.1
• /
• pp.20-28
• /
• 2008

This paper proposes a method for solving distribution system planning problems taking into account demand uncertainty and geographical information. The proposed method can automatically select appropriate location and size of a substation, routing of feeders, and appropriate sizes of conductors while satisfying constraints, e.g. voltage drop and thermal limit. The demand uncertainty representing load growth is modeled by fuzzy numbers. Feeder routing is determined with consideration of existing infrastructure, e.g. streets and canals. The method integrates planner's experience and process optimization to achieve an appropriate practical solution. The proposed method has been tested with an actual distribution system, from which the results indicate that it can provide satisfactory plans.