• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.3
• /
• pp.105-111
• /
• 2013

Probability distribution of microbes in wastewater is a crucial factor to be determined for microbial risk assessment associated with its reuse. The objective of this study was to investigate probability distribution of an indicator microorganism in wastewater. Daily total coliform counts measured from nationwide wastewater treatment plants in 2010 by the Ministry of Environment were used for statistical analysis. Basic statistics and probability distributions were estimated in the three different spatial scales using the MS Excel software and FARD2006 model. Overall, wastewater from manure and livestock treatment plants demonstrated greater median coliform counts than from sewage and village treatment plants. Generalized logistic (GLO) and 2-parameter Weibull (WBU2) appeared to be the two probability distributions that fitted best for total coliform numbers in wastewater. The study results of microbial statistics and probability distributions would provide useful data for quantitative assessment of microbial risk from agricultural wastewater reuse.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.12A
• /
• pp.1828-1835
• /
• 2000

In this paper, we analyzed the other-cell interference characteristics for various non-uniform traffic distributions and their effects on the capacity of multi-cell CDMA system. We consider three different traffic distributions, i.e., linear, exponential and Gaussian traffic distribution with distribution parameters. Changing the distribution parameter, we can obtain the center-focused distributions or uniform distributions for each model. From the results of other-cell interference calculation we can see that the other-cell interference decreases, as the user concentrates on the base station. Also using frequency reuse efficiency indicating the capacity reduction of a multi-cell system when compared to a single cell system, we evaluate the effect of traffic distribution on the reverse link CDMA capacity. For linear case, the capacity of multi-cell system is reduced to 0.637∼0.867 times that of single cell system. On the other hand, for both exponential and Gaussian cases, the capacity under a multi-cell environment is equal to 70∼100% of that under a single cell. Therefore, we conclude that the average capacity of multi-cell CDMA system are increased when users are likely to be at near the cell base station due to reduced total other-cell interference and decreased when users exist at near the cell edge regardless of traffic distribution models.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.4
• /
• pp.348-353
• /
• 2008

Most of the high voltage insulation systems, such as the power cable joint having hetero interface, are composed of more than two different insulators to improve insulating performance. The partial discharge(PD) in these hetero interface is expected to affect the total insulation performance. Thus, it is important to study electrical properties on these interfaces. This study described the influence of copper and semiconductive substance defects on $\Phi$-q-n distribution between the interface of the model cable joints to classify PD source. PD was sequentially detected for 600 cycles of the applied voltage. The K-means cluster analysis has been analyzed to investigate the $\Phi$-q-n distribution. The skewness-kurtosis(Sk-Ku) plot from K-means clustering results was defined to quantify cluster distribution and classify distribution patterns. The Sk-Ku plot is composed of skewness and kurtosis along abscissa and ordinate which indicate the asymmetry and the sharpness of distribution. As a result of the Sk-Ku plot, it was confirmed that the data was distributed in 1st 2nd and 3rd quadrant at copper foreign substance defect, but in case of semiconductive foreign substance, the data was distributed in 2nd quadrant only.

• Journal of Distribution Science
• /
• v.17 no.3
• /
• pp.21-30
• /
• 2019

Purpose - While many related prior studies have focused on the segregation by race and ethnicity, the academic interest in the separation of residence by income and social class is gradually increasing. This study aims to not only investigate spatial pattern of economic segregation and poverty rate in South Korea, but also shed light on what affect residential distribution of the poor. Research design, data, and methodology - The unit of analysis is Si-Gun-Gu municipal level entities of South Korea. Most demographic, socioeconomic, and residential variables were derived from Korean Census Data in 2015. In order to examine spatial patterns of economic segregation and poverty rate in South Korea, a series of measurements and visualization was conducted through the Geo-Segregation Analyzer and ArcGIS programs. Determinants of economic segregation and local poverty rates were investigated by regression analyses using STATA. Results - The spatial patterns of areas with high poverty rates were extremely clustered, while the distribution of areas with high economic segregation was relatively evenly distributed. Demographic, residential, and local factors appeared to affect whether the poor live in particular area or spread evenly. Conclusions - The factors that raise the poverty rate result in lower level of economic segregation, while factors that reduce the poverty rate lead to severe level of economic segregation.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.5
• /
• pp.400-405
• /
• 2020

To analyze the flow distribution formed by multiple acoustic sources, the distribution of acoustic streaming speed caused by an ultrasonic transducer composed of two identical piezoelectric vibrators was examined for various angles between the sound sources. In order to measure the distribution of the speed along the acoustic axis of the transducer, a simple measurement method using a droplet indicator having density similar to that of water is suggested. The simulation results calculated by a numerical method and experimental results showed a similar tendency, and the change of flow speed distribution with the intersection angle between acoustic beams radiated from two acoustic sources was analyzed.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.2
• /
• pp.245-251
• /
• 2016

Despite the exponential throughput improvement in mobile communications systems, their ability to satisfy requirements of state-of-the-art and future applications of advanced metering infrastructure (AMI) is still under investigation. Challenges are mainly due to the inadequacy of third generation partnership project (3GPP) networks to support large amounts of devices simultaneously, while the number of AMI end-devices and the frequency of their data transmission increase with new AMI-based applications. In this introductory survey, innovative and future AMI applications and their communication requirements are first reviewed. Then, we identify challenges of 3GPP long term evolution (LTE) in enabling future AMI applications. More importantly, the latest improvements to LTE-A standard release 12 and 13 are reviewed and analyzed with regards to their potential to improve the quality of LTE-enabled AMI. It is found that 3GPP enhancements on machine type communications (MTC) standards will significantly enhance AMI communications. Beyond MTC specifications, non-MTC-specific enhancements such as carrier aggregation and multi-connectivity for user equipment will also contribute greatly to improving reliability and availability of AMI devices. The paper's focus is towards improved backhaul support for innovative and future AMI applications, beyond traditional automatic meter reading.

• Journal of Biomedical Engineering Research
• /
• v.18 no.4
• /
• pp.439-446
• /
• 1997

We undertook this study to determine the plantar pressure distribution characteristics of hallux valgus, major increasing foot disease. Twenty three valgus Patients were evaluated with clinical examinations, radiologic studies and dynamic plantar pressure distribution measurements. The present study also suggested a masking method for detailed analyses on plantar pressure distribution measurements. With higher grade of hallux valgus, pressure, contact area, and impulse on metartasus are significantly increased Pressure concentration is very important in foot diseases and an approximate plantar pressure distribution should be considered on any shoe design.

• Journal of the Korean Society of Combustion
• /
• v.11 no.1
• /
• pp.1-10
• /
• 2006

Oil-fired power plant usually uses several burners and combustion air is supplied to each burner through the complicated duct which is called windbox. A windbox should be designed to supply combustion air to each burner uniformly but, due to the complicated duct shape, flow distribution in the windbox is unbalanced and non-uniform supplies of combustion air are induced by these unbalanced flows in the windbox. These flow patterns tend to make flame unstable, increase the formation of pollutants and lower the overall combustion efficiency. To prevent these disadvantages, flow patterns in the windbox should be investigated for the uniform flow distribution. In this study, computational simulation method was used to investigate the flow distribution in a windbox and measured the velocities at the exit of burners in a real windbox and model tests to compare with CFD results. The results show two significant flow patterns. One is that the flow rates of each burner are different from each other and this means that all burners operate in different conditions of air to fuel ratio. The other is that the flow distribution at the exit of each burner is not axi-symmetric although the burner shape is axi-symmetric. Additionally some modifications of windbox shape and installation of baffles were proposed to make the uniform flow in the windox.

• Journal of Korean Society of Forest Science
• /
• v.98 no.5
• /
• pp.576-583
• /
• 2009

Based on the stem analysis and biomass measurement of 36 trees and 1,576 branches in Pinus sylvestris var. mongolica (Mongolian pine) plantations of Northeast China, this study was conducted to develop estimation model equation for leaf biomass of a single tree and branch, to examine the vertical distribution of leaf biomass in the crown, and to evaluate the proportional ratios of biomass by tree parts, stem, branch, and leaf. The results indicated that DBH and crown length were quite appropriate to estimate leaf biomass. The biomass of single branch was highly correlated with branch collar diameter and relative height of branch in the crown, but not much with stand density, site quality, and tree height. Weibull distribution function would have been appropriate to express vertical distribution of leaf biomass. The shape parameters from 29 sample trees out of 36 were less than 3.6, indicating that vertical distribution of leaf biomass in the crown was displayed by bell-shaped curve, a little inclined toward positive side. Apparent correlationship was obtained between leaf biomass and branch biomass having resulted in linear function equation. The stem biomass occupied around 80% and branch and leaf made up about 20% of total biomass in a single tree. As the level of tree class was increased from class I to class V, the proportion of the stem biomass to total biomass was gradually increased, but that of branch and leaf became decreased.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.5
• /
• pp.99-117
• /
• 2006

Consumers keep demanding for diversified high quality products, valuable services and safety. With this in mind, Distribution Industry is being updated rapidly to accomodate this demand. Meanwhile, Distribution Information Technology of agricultural products has been in slow progress with little in-depth studies. In this study, it has been analyzed the usage of Bar code which is the key element for agricultural Distribution Information Technology. The analysis was conducted through a survey utilizing questionnaire covering 5 Hypermarkets(Super-centers) including big 3 companies. Also, Japanese market trends have been studied to visit a Japan Government Organization concerned, GS1 Japan, an Agricultural Cooperative, an Agricultural Wholesale Market, and a Retail Company. If we could use KAN code for all agricultural products, we could collect and analyze the information of price and trade quantity of them. It opens a new era to understand the agricultural products supply and demand easily. This will certainly make a great contribution to the evolution of agricultural products distribution. From this research, it is suggested that collective efforts by suppliers, wholesalers, retailers and Government Officers are needed to make large scale mutual marketing Organizations, which specialize in sending out agricultural products. The Organization is recommended to standardize and pack every final agricultural products, to promote the use of KAN code.