• The Korean Journal of Food And Nutrition
• /
• v.30 no.1
• /
• pp.129-138
• /
• 2017

The purpose of this study was to evaluate the satisfaction with school meal service and the food preference in elementary school students who are in their growth period. A total of 484 students (242 boys) participated and completed a questionnaire survey. The results indicated that the merit of school meals was the highest in 'balanced diet'. 'Food hygiene' and 'delicious food' were the most important factors in school meals. Most of the students wanted 'balance between eastern and western foods' and 'new dishes' for the menu of school meals. For the distribution of meals, 'various kinds of side dishes' and 'warmth of dishes' were mainly required. The main problems of the current environment of school meals were 'long waiting time' and 'noise of the cafeteria'. In satisfaction with the school meal service, the highest satisfactory factor was 'staffs' cleanliness', following 'arrangement of furniture in cafeteria' and 'nutrition information-providing'; whereas, the lowest factor was 'staffs' kindness'. In the preference of foods, students preferred 'white rice'; whereas they did not like 'bean rice'; and 'fried rice' was preferred. In side dishes with meat and fish, most of the meats including 'Tangsuyuk' and 'Bulgogi' were preferred. For fish, 'fried hairtail' was preferred; whereas, 'fried Spanish mackerel' was not. In case of kimchi, 'Chinese cabbage kimchi' and 'cubed radish kimchi' were especially preferred. Considering these results, intensive improvement is required to increase school meal satisfaction by understanding the students' needs. An effort to allow the students' preferences to be reflected in the menu is also needed.

• Journal of The Korean Astronomical Society
• /
• v.46 no.3
• /
• pp.103-123
• /
• 2013

Star clusters are superb astrophysical laboratories containing cospatial and coeval samples of stars with similar chemical composition. We initiate the Sejong Open cluster Survey (SOS) - a project dedicated to providing homogeneous photometry of a large number of open clusters in the SAAO Johnson-Cousins' UBV I system. To achieve our main goal, we pay much attention to the observation of standard stars in order to reproduce the SAAO standard system. Many of our targets are relatively small sparse clusters that escaped previous observations. As clusters are considered building blocks of the Galactic disk, their physical properties such as the initial mass function, the pattern of mass segregation, etc. give valuable information on the formation and evolution of the Galactic disk. The spatial distribution of young open clusters will be used to revise the local spiral arm structure of the Galaxy. In addition, the homogeneous data can also be used to test stellar evolutionary theory, especially concerning rare massive stars. In this paper we present the target selection criteria, the observational strategy for accurate photometry, and the adopted calibrations for data analysis such as color-color relations, zero-age main sequence relations, Sp - MV relations, Sp - $T_{eff}$ relations, Sp - color relations, and $T_{eff}$ - BC relations. Finally we provide some data analysis such as the determination of the reddening law, the membership selection criteria, and distance determination.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.2 s.302
• /
• pp.59-68
• /
• 2005

The amount of digitalized contents has been rapidly increased, but the main distribution channel of them is Internet which is easily accessible. Therefore 'security' necessarily arises as one of the most important issues and the method of protecting contents becomes a major research topic as much as data coding techniques. In recent years, many developers have studied on techniques that allow only authorized person to access contents. Among them the scrambling method is one of well-known security techniques. In this paper, we propose a simple and effective digital video scrambling method which utilizes the intra block properties of a recent video coding technique, H.264. Since intra prediction modes are adopted in H.264 standard, it is easy to scramble a video sequence with modification of the intra prediction modes. In addition to its simplicity, the proposed method does not increase bit rate after scrambling. The inter blocks are also distorted by scrambling intra blocks only. This paper introduces a new digital video scrambling method and verifies its effectiveness through simulation.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.2 s.302
• /
• pp.37-48
• /
• 2005

In this paper, a new object detection method for FLIR images is proposed. The proposed method consists of intensity ranking feature and a classification algerian using the feature. The intensity ranking feature is a representation of an image, from which intensity distribution is regularized. Each object candidate region is classified as object or non-object by the proposed classification algorithm which is based on the intensity ranking similarity between the candidate and object training images. Using the proposed algorithm pixel-wise detection results can be obtained without any additional candidate selection algorithm. In experimental results, it is shown that the proposed ranking feature is appropriate for object detection in a FLIR image and some vehicle detection results in the situation of existing noise, scale variation, and rotation of the objects are presented.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.33-40
• /
• 2006

This paper presents a novel surface acoustic wave (SAW)-based pressure sensor, which is composed of single phase unidirectional transducer (SPUDT), three reflectors, and a deep etched substrate for bonding underneath the diaphragm. Using the coupling of modes (COM) theory, the SAW device was simulated, and the optimized design parameters were extracted. Finite Element Methods (FEM) was utilized to calculate the bending and stress/strain distribution on the diaphragm under a given pressure. Using extracted optimal design parameters, a 440 MHz reflective delay line on 41o YX LiNbO3 was developed. High S/N ratio, shan reflection peaks, and small spurious peaks were observed. The measured S11 results showed a good agreement with simulated results obtained from coupling-of-modes (COM) modeling and Finite Element Method (FEM) analysis.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.4
• /
• pp.381-391
• /
• 2001

This paper presents an efficient approach to build an image mosaics from image sequences. Unlike general panoramic stitching methods, which usually require some geometrical feature points or solve the iterative nonlinear equations, our algorithm can directly recover the 8-parameter planar perspective transforms. We use four quasi-feature points in order to compute the projective transform between two images. This feature is based on the graylevel distribution and defined in the overlap area between two images. Therefore the proposed algorithm can reduce the total amount of the computation. We also present an algorithm lot efficiently matching the correspondence of the extracted feature. The proposed algorithm is applied to various images to estimate its performance and. the simulation results present that our algorithm can find the correct correspondence and build an image mosaics.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.6
• /
• pp.34-43
• /
• 2002

This paper deals with a standard cell placement which is based on a quadratic programming. This paper proposes a new additional force to reduce the cell overlap and to get a uniform distribution of cells. The additional force is not concerned with interconnections between cells, but it is determined by the density of a placement area. In this paper, we modelled that the new additional force is a force which is caused by the dummy fixed cell. And it is used for the global placement. Proposed placement method is compared with TimberWolf v7.0 and Itools vl.4. Proposed placer achieved 7.5% average reduction in wirelength in non timing driven mode, 5.0% average reduction in wlrelength in timing driven mode compared to TimberWolf v7.0. And we got a comparable result to Itools vl.4.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.2
• /
• pp.69-74
• /
• 2000

The bandwidth of microstrip slot antenna with T-shaped feed line was a wider than one of the conventional feeding structure. When the slot antenna with bi-directional radiator wants to radiate only one direction, the reflector must be set up seperately. But this antenna doesn't need set up reflector. And then we proposed to a new method of a directional slot radiator with a cross-shaped feedline including the reflector using 2-layers dielectric materials. It is calculated waves and electric field distribution in the time domain by using FDTD method. We also are calculated return loss, VSWR, input impedance, and radiation pattern in the frequency domain by Fourier transforming the time domain results, respectively. It was found that the bandwidth of this antenna changes as length($\I_s$) and width($\W_s$) of slot, length of the horizontal feedline($\I_d$), length of the vertical feedline($\I_u$) and offset sensitively. After optimizing the parameters of design, the maximum bandwidth was measured as 1,850MHz at the center frequency 2.5 GHz.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.12
• /
• pp.51-57
• /
• 1999

In this paper, an adaptive thresholding of the nonuniformly contrasted images is proposed through using the contrast pre-enhancement of the local regions and the bilinear interpolation between the local threshold values. The nonuniformly contrasted image is decomposed into 9${\times}$9 sized local regions, and the contrast is enhanced by intensifying the gray level difference of each low contrasted or blurred region. Optimal threshold values are obtained by iterative method from the gray level distribution of each contrast-enhanced local region. Discontinuities are reduced at the region of interest or at the characters by using bilinear interpolation between the neighboring threshold surfaces. Character recognition experiments are conducted using backpropagation neural network on the characters extracted from the nonuniformly contrasted document, PCB, and wafer images binarized through using the proposed thresholding and the conventional thresholding methods, and the results prove the relative effectiveness of the proposed scheme.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.1
• /
• pp.144-152
• /
• 1996

In this paper, a pulse-mode digital multilayer neural network with a massively parallel yet compact and flexible network architecture is presented. Algebraicneural operations are replaced by stochastic processes using pseudo-random pulse sequences and simple logic gates are used as basic computing elements. The distributions of the results from the stochastic processes are approximated using the hypergeometric distribution. A statistical model of the noise(error) is developed to estimate the relative accuracy associated with stochastic computing in terms of mean and variance. Numerical character recognition problems are applied to the network to evaluate the network performance and to justify the validity of analytic results based on the developed statistical model. The network architectures are modeled in VHDL using the mixed descriptions of gate-level and register transfer level (RTL). Experiments show that the statistical model successfully predicts the accuracy of the operations performed in the network and that the character classification rate of the network is competitive to that of ordinary Back-Propagation networks.