• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.431-431
• /
• 2016

Typical Cu(In,Ga)Se2 (CIGS)-based solar cells have a buffer layer between CIGS absorber layer and transparent ZnO front electrode, which plays an important role in improving the cell performance. Among various buffer materials, chemical bath deposition (CBD)-ZnS is being steadily studied to alternative to conventional CdS and the efficiency of CBD-ZnS/CIGS solar cell shows the comparable values with that of CdS/CIGS solar cell. The intriguing thing is that reversible changes occur after exposure to illumination due to the metastable defect states in completed ZnS/CIGS solar cell, which induces an improvement of solar cell performance. Thus, it implies that the understanding of metastable defects in CBD-ZnS/CIGS solar cell is important issue. In this study, we fabricate the ITO/i-ZnO/CBD-ZnS/CIGS/Mo/SLG solar cells by controlling the NH4OH mole concentration (from 2 M to 3.5 M) of CBD-ZnS buffer layer and observe their conversion efficiency with and without light soaking for 1 hr. From the results, NH4OH mole concentration and light exposure can significantly affect the CBD-ZnS/CIGS solar cell performance. In order to investigate that which layer can contain metastable defect states to influence on solar cell performance, impedance spectroscopy and capacitance profiling technique with exposure to illumination have been applied to CBD-ZnS/CIGS solar cell. These techniques give a very useful information on the density of states within the bandgap of CIGS, free carriers density, and light-induced metastable effects. Here, we present the rearranged charge distribution after exposure to illumination and suggest the origin of the metastable defect states in CBD-ZnS/CIGS solar cell.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.9
• /
• pp.1347-1355
• /
• 2015

In this study, the physicochemical properties, antioxidant capacities, and volatile flavor compounds of oriental melon wine prepared by freeze concentration after heat treatment (HA), ascorbic acid treatment (AAT), and heat and ascorbic acid treatment (HAAT) were investigated. During fermentation period, the melon wine by HAAT showed greater reduction of soluble solids and reducing sugar contents compared to other treatments. In addition, the melon wine treated with HAAT also showed a higher L value and lower browning index compared to other treatments. After aging, free sugar including fructose, and organic acids including citric acid, succinic acid, and malic acid were detected in all samples. For antioxidant activities and contents, HAAT treated wine showed greater antioxidant activities and total phenolic contents than those of others. In GC/MS analysis, a total of 33 volatile flavor compounds were identified. In the principal component analysis of volatile flavor compounds, principal components 1 and 2 represented 88.15% of the whole date distribution and showed opposite tendencies. Taken together, HAAT enhanced the antioxidant activities and sensory properties of oriental melon wine. Moreover, freeze concentration gave the different volatile flavor characteristics in oriental melon wine.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.8
• /
• pp.1023-1032
• /
• 2003

The effect of local forcing on the separated flow over a backward-facing step is investigated through hot-wire measurements and flow visualization with multi-smoke wires. The boundary layer upstream of the separation point is laminar and the Reynolds number based on the free stream velocity and the step height is 13800. The local forcing is given from a slit located at the step edge and the forcing signal is always defined when the wind tunnel is in operation. In case of single frequency forcing, the streamwise velocity and the reattachment length are measured under forcing with various forcing frequencies. For the range of 0.010〈S $t_{\theta}$〈0.013, the forcing frequency component of the streamwise velocity fluctuation grows exponentially and is saturated at x/h = 0.75 , while its subharmonic component grows following the fundamental and is saturated at x/h = 2.0. However, the saturated value of the subharmonic is much lower than that of the fundamental. It is observed that the vortex formation is inhibited by the forcing at S $t_{\theta}$ = 0.019 . For double frequency forcing, natural instability frequency is adopted as a fundamental frequency and its subharmonic is superposed on it. The fundamental frequency component of the streamwise velocity grows exponentially and is saturated at 0.5 < x/ｈ < 0.75, while its subharmonic component grows following the fundamental and is saturated at x/ｈ= 1.5 . Furthermore, the saturated value of the subharmonic component is much higher than that for the single frequency forcing and is nearly the same or higher than that of the fundamental. It is observed that the subharmonic component does not grow for the narrow range of the initial phase difference. This means that there is a range of the initial phase difference where the vortex parring cannot be enhanced or amplified by double frequency forcing. In addition, this effect of the initial phase difference on the development of the shear layer and the distribution of the reattachment length shows a similar trend. From these observations, it can be inferred that the development of the shear layer and the reattachment length are closely related to the vortex paring.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.4
• /
• pp.580-610
• /
• 1993

The purpose of this study was to analyse the deflection and stress distribution at the supporting bone and it's superstructure by the alteration of angulation between implant and it's implant abutment. For this study, the free-end saddle case of mandibular first and second molar missing would be planned to restore with fixed prosthesis. So the mandibular second premolar was prepared for abutment, and the cylinder type osseointegrated implant was placed at the site of mandibular second molar for abutment. The finite element stress analysis was applied for this study. 13 two-dimensional FEM models were created, a standard model at $0^{\circ}$ and 12 models created by changing the angulation between implant and implant abutment as increasing the angulation mesially and distally with $5^{\circ}$ unittill $30^{\circ}$. The preprocessing decording, solving and postprocessing procedures were done by using FEM analysis software PATRAN and SUN-SPARC2GX. The deflections and von Mises stresses were calculated under concentrated load (load 1) and distributed load(load 2) at the reference points. The results were as follows : 1. Observing at standard model, the amount of total deflection at the distobuccal cusp-tip of pontic under concentrated load was largest of all, and that at the apex of implant was least of all, and the amount of total deflection at the buccal cusp-tip of second premolar under distributed load was largest of all, and that at the apex of implant was least of all. 2. Increasing the angulation mesially or distally, the amounts of total deflection were increased or decreased according to the reference points. But the order according to the amount of total deflection was not changed except apex of second premolar and central fossa of implant abutment under concentrated load during distal inclination. 3. Observing at standard model, the von Mises stress at the distal joint of pontic under concentrated load was largest of all, and that at the apex of implant was least of all. The von Mises stress at the distal margin of second premolar under distributed load was largest of all, and that at the apex of Implant was least of ail. 4. Increasing the angulation of implant mesially, the von Mises stresses at the mesial crest of implant were increased under concentrated load and distributed load, but those were increased remarkably under distributed load and so that at $30^{\circ}$ mesial inclination was largest of all. 5. Increasing the angulation of implant distally, the von Mises stresses at the distal crest of implant were increased remarkably under concentrated load and distributed load, and so those at $30^{\circ}$ distal inclination were largest of all.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.2
• /
• pp.124-136
• /
• 2001

Heat shock protein (HSP) expression is unregulated in tumor cells and, HSP expression is likely marker of the malignant potential of oral epithelial lesion. Furthermore, the 70kDa HSP is implicated in the degree of tumor differentiation, the rate of tumor proliferation and the magnitude of the anti-tumor Immune response. Accordingly, the distribution and intensity of HSP70 and HSP47 expression was assessed in the DMBA induced oral carcinogenesis in hamster. Golden Syrian hamsters which were 3 months-age and $90{\sim}120g$ were collected. 9,10-dimethyl -1,2-benzanthracene (DMBA) in a 0.5% solution in mineral oil was painted on the buccal pouch mucosa 3 times per week in the study group. In each control and experimental groups of 6, 8, 10, 12, 14, 16, 18, 20 weeks, specimen were sectioned for immunohistochemical study with anti-HSP47 and anti-HSP70 antibody. The following results were obtained. 1. HSP47 positive cells were race or negative of normal oral mucosa, increased mildly in basal and suprabasal basal layer, and spinous cell layer after experimental 6 weeks (dysplastic or CIS stage). In CIS stage, HSP47 expression is prominent in dysplastic free or normal adjacent epithelium. 2. HSP47 positive cells in connective tissue were mainly inflammatory cells, which is gradually increased from control to precancerous and cancer stage. But HSP47 positive cells after 14 weeks were decreased, especially normal and cancer adjacent epithelium. 3. The positive staining cells of HSP70 in control, dysplastic, and CIS stage were not seen. But they were mild findings in basal layer and moderate findings in spinous layer after experimental 14 weeks (cancer stage). 4. HSP70 positive cells were increased in precancerous and cancer stage than control group in connective tissue. After experimental 16 weeks, we could not find the HSP expression in cancer cells according to cancer differentiation or cancer stage. It is concluded that HSP70 or HSP47 expression is not a definitive marker of oral malignancy or malignant potential. However, with further development, HSP immunoreactivity may be valuable as an adjunct to conventional histology for assessing the malignant potential of oral mucosal lesions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.2
• /
• pp.281-299
• /
• 1995

The purpose of this study was to evaluate the degree of occlusal contact under the fixed implant prosthesis of partially edentulous patients which was hased on occlusal concept of implant prosthesis. From the patients who have free-standing implant supported prosthesis of unilateral partially edentulous area, occlusal and occlusal contact point of th enatural tooth side and implant side of light closure and heavy closure were analyzed by T-scan system throuht pre-and post-adjustment and the degree of occlusal contact was estimated by Shimstock. The following results were obtained : 1. The occlusal force of natural tooth side(NF) from mid-sagittal axis was relatively constant at light and heavy closure through pre-and post-adjustment, but the occlusal force of implant side(IF) was decreased significantly at light closure(P<0.01) and heavy closure(P<0.05) of post-adjustment. 2. Natural tooth side-implant side moment(MIMoment) fo occlusal force from mid-sagittal axis was significant(p<0.05) through pre-and post-adjustment and the deviation from mid-sagittal axis was increased at light closure of post-adjustment, but was decreased at heavy closure of post-adjustment. 3. Comparing the NF and IF, IF was greater at heavy closure of pre-adjustment, and NF was greater at light closure of post-adjustment, and the NF and IF was relatively equally distributed at light closure of pre-adjustment and at heavy closure of post-adjustment. 4. The number of occlusal contact point of natural tooth side(NC) was relatively constant through pre-and post-adjustment, but the number of occlusal contact point of implant side(IC) was significantly decreased(P<0.05) at light closure of post-adjustment, and was not significant but was lesser at heavy closure of post-adjustment. 5. Difference of the NC and IC was greater at light closure of post-adjustment, but it was less at heavy closure of post-adjustment, and therefore occlusal contact point of natural tooth side and implant side was relatively equally distributed at heavy closure of postadjustment. 6. When bilaterally distribution of occlusal force and occlusal contact point was established, degree of occlusal contact of implant suporoted prosthesis with opoosing teeth at light clousre was $34.13{\pm}21.69{\mu}m$.

• Journal of Korean Society of Forest Science
• /
• v.105 no.1
• /
• pp.132-138
• /
• 2016

The objectives of this study were to infer the parameters of forest stand growth functions of STEMS for Cryptomeria japonica stands of Jeju Hannam Experimental Forest, Korea Forest Research Institute, and to investigate the effects of thinning regimes on the patterns of stand growth and carbon absorption. The forest stand growth functions for the potential diameter growth, modifier, crown ratio and mortality are the major ones composing the independent-tree/distance-free forest stand growth simulator, STEMS. The parameters were inferred using the sets of growth data obtained from stem analyses of 39 trees, chosen from 13 sample plots of the forest stands. The effects of thinning regimes on the patterns of stand growth and carbon absorption were investigated by simulating the stand growth patterns of the case study stand with 3 different thinning regimes: no-thinning, early thinning with low intensity and late thinning with high intensity using the simulator. According to the results of the analyses, the different thinning regimes cause significant effects on the growth patterns of average DBH, average height, diameter distribution and stand volume as well as the amount of carbon absorptions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.11
• /
• pp.1759-1766
• /
• 2013

In this study, the optimal conditions for salmon hydrolysate using squid liver and compositional properties of hydrolysate were investigated. The optimal conditions were $55^{\circ}C$, pH 5.5 and 0.66~0.67% (w/w) in the ratio of squid liver to acidic and thermal treated salmon muscle. The free amino acid of hydrolysate from the acidic treated salmon muscle was higher than that of hydrolysate from the thermal treated salmon muscle, while the total amino acid and mineral were high in the acidic treated salmon muscle. Furthermore, cadmium of hydrolysate from the thermal denatured salmon muscle was below 2 ppm, and has an acceptable level as potential ingredient. The distribution of peptide molecular weight was 40.0% for 1.0~9.5 kDa, 6.7% for 0.5 kDa, and 47.4% of others in hydrolysate from the thermal treated salmon muscle. Both hydrolysates did not show any toxicity against the HepG2 cell line for up to $200{\mu}g/mL$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.8
• /
• pp.695-700
• /
• 2014

In the present study, the melting temperature depression of Sn nanoparticles manufactured using the modified evaporation method was investigated. For this purpose, a modified evaporation method with mass productivity was developed. Using the manufacturing process, Sn nanoparticles of 10 nm size was manufactured in benzyl alcohol solution to prevent oxidation. To examine the morphology and size distribution of the nanonoparticles, a transmission electron microscope was used. The melting temperature of the Sn nanoparticles was measured using a Differential scanning calorimetry (DSC) which can calculate the endothermic energy during the phase changing process and an X-ray photoelectron spectroscopy (XPS) used for observing the manufactured Sn nanoparticle compound. The melting temperature of the Sn nanoparticles was observed to be $129^{\circ}C$, which is $44^{\circ}C$ lower than that of the bulk material. Finally, the melting temperature was compared with the Gibbs Thomson and Lai's equations, which can predict the melting temperature according to the particle size. Based on the experimental results, the melting temperature of the Sn nanoparticles was found to match well with those recommended by the Lai's equation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.2
• /
• pp.285-290
• /
• 1997

The insulin-like growth factors(IGFs) are bound to several binding proteins(IGFBPs) that appear to regulate IGF transport, receptor binding, and its action. The concentration of these peptides are altered by catabolic conditions. To determine IGF-I and IGFBP levels in noninsulin-dependent diabetes mellitus (NIDDM), sera was obtained from 5 patients and 7 controls. Serum levels of IGF-I in NIDDM were lower than those in either of the controls. By western immunoblot analysis, especially IGFBP-1 levels are increased, whereas IGFBP-3 levels decreased and their fragments was increased in NIDDM serum. IGFBP-3 proteolytic activity in NIDDM sera was inhibited by phenylmethylsulfonylfluoride (PMSF), aprotinin, and ethylenediaminetetraacetic acid(EDTA). This pattern of inhibition was consistent with a metal-dependent serine protease. By gelatin zymography, these proteolytic enzymes were identified as the size of 97 and 69 kDa. IGFBP-1, which is primarily insulin regulated, was increased in NIDDM and may modulate circulating IGF-I levels by regulating capillary passage of IGF-I. IGFBP-3 proteolysis markedly reduces its affinity for the IGFs, particularly for IGF-I. This accelerates their kinetics of dissociation, thereby increasing the proportions of IGF-I in free form and its availability to the cells.