• Korean Journal of Food Science and Technology
• /
• v.27 no.1
• /
• pp.112-118
• /
• 1995

The effect of various packaging methods on kimchi quality was investigated in order to develop the packaging techniques for preventing commercial kimchi products from inflation and explosion, due to fermentative gas evolved during storage and distribution. Kimchi was packaged in different methods; 1) atmospheric packaging(AP), 2) check valve packaging(CV), 3) double packaging(DP), and 4) vacuum packaging(VP). The quality of kimchi during storage at $10^{\circ}C$ was evaluated in terms of gas composition, free volume, pH, titratable acidity color index and sensory properties. The gas composition inside packages showed different curves according to the packaging methods. Due to fermentative gas accumulation in both AP and CV, $CO_2$ concentration increased by 2 stepwise pattern, while $O_2$, concentration decreased exponentially. In DP, $O_2$ concentration remained constant, but $CO_2$ concentration increased by 2 stepwise pattern and then decreased. In contrast, VP produced low $O_2$ and high $CO_2$ concentrations only at the end of storage. The free volume in both AP and CV showed typical sigmoidal curves similar to $CO_2$ concentration changes. It remained constant in DP, but started to increase at the late stage of storage in VP. There was no significant effect of packaging methods on pH changes of kimchi. In titratable acidity, DP maintained relatively higher than others. Regarding to the color change of crushed kimchi juice in all packages, L and b values decreased exponentially but a value remained constant during storage. Color index(L b/a) of crushed kimchi juice decreased exponentially and remained constant at the end of storage. The growth of lactic acid bacteria was VP, CV, AP, DP in increasing order. In sensory test, the sourness scores of DP were fairly higher than those of others, but the texture was not significantly affected by the packaging methods. The preference for kimchi showed VP>AP, CV>DP in order of score. In this study, it could be proposed to employ DP and VP method as the effective packaging techniques for preventing commercial kimchi products from inflation.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Journal of the Korea Concrete Institute
• /
• v.27 no.2
• /
• pp.127-136
• /
• 2015

To evaluate the effects of limestone powder and silica fume on the properties of high-strength high-volume ground granulated blast-furnace slag (GGBFS) blended cement concrete, this study investigated the rheology, strength development, hydration and pozzolanic reaction characteristics, porosity and pore size distribution of high-strength mortars with the water-to-binder ratio of 20, 50 to 80% GGBFS, up to 20% limestone powder, and up to 10% silica fume. According to test results, compared with the Portland cement mixture, the high-volume GGBFS mixture had much higher flow due to the low surface friction of GGBFS particles and higher strength in the early age due to the accelerated cement hydration by increase of free water; however, because of too low water-to-binder ratio and cement content, and lack of calcium hydroxide content, the pozzolanic reactio cannot be activated and the long-term strength development was limited. Limestone powder did not affect the flowability, and also accelerate the early cement hydration. However, because its effect on the acceleration of cement hydration is not greater than that of GGBFS, and it does not have hydraulic reactivity unlikely to GGBFS, compressive strength was reduced proportional to the replacement ratio of limestone powder. Also, silica fume and very fine GGBFS lowered flow and strength by absorbing more free water required for cement hydration. Capillary porosities of GGBFS blended mortars were smaller than that of OPC mortar, but the effect of limestone powder on porosity was not noticeable, and silica fume increased porosity due to low degree of hydration. Nevertheless, it is confirmed that the addition of GGBFS and silica fume increases fine pores.

• Radiation Oncology Journal
• /
• v.28 no.2
• /
• pp.79-84
• /
• 2010

Purpose: We retrospectively analyzed the long-term results of radical surgery and intraoperative radiation therapy (IORT) in patients with stomach cancer. Materials and Methods: From 1988 to 1994, 51 patients were treated with curative surgery and IORT. Postoperative external beam radiotherapy (EBRT) was administered to 30 patients, while adjuvant chemotherapy was administered to 35 patients. A dose of 15 Gy was irradiated with a 9 MeV electron beam as the IORT and a median dose of EBRT was 43.2 Gy (range, 7.2 to 45 Gy). The follow-up period ranged from 1~254 months, with a median follow-up period of 64 months. Results: The median age of all the patients was 58 years (range, 30 to 71 years). The distribution of pathologic stage (American Joint Committee on Cancer [AJCC] 2002 tumor-note-metastasis [TNM]) was as follows: 13 stage I (25.5%), 10 stage II (19.6%), 25 stage III (49.0%), and 3 stage IV (5.9%). Distant metastases occurred in 11 patients (10 in the peritoneum and 1 in bone), including one patient with concurrent local recurrence (anastomosis site). The 5-year locoregional control, disease free survival and overall survival rates were 94.7%, 66.5%, and 51.7%, respectively. For the multivariate analysis, age, TNM stage, and EBRT were significant prognostic factors for overall survival, and only TNM stage for disease free survival. Conclusion: We could have achieved a high loco-regional control rate in patients with locally advanced stomach cancer by adding IORT to radical surgery. However, the benefit of IORT on survival remains to be elucidated.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.2
• /
• pp.147-154
• /
• 1984

Two Fe-hydrous oxide A,B and one Al-hydroxide minerals were synthesized precipitating Fe $Cl_3$ and $AlCl_3$ with alkali solution(NaOH) at pH 6.0, 12.0 and 4.5 respectively, for precise understanding of physico-chemical and surface charge characteristics of soils in which these minerals are dominant. Identification of these final products, effect of free and amorphous materials on X-ray diffraction analysis, particle size distribution and surface change characterics of these minerals were performed. Fe-hydroxide A and B were identified as great deal of X-ray amorphous material and as goethite with large amount of X-ray amorphous material, respectively. Dehydration by oven at $105^{\circ}C$ of these minerals exhibited akaganeite peaks with low X-ray amorphous hump and pure goethite peaks for Fe-hydroxide A and B, respectively. Both minerals, however, turned into hematite upon firing at $550^{\circ}C$. On the other hand, Al-hydroxide identified as mixture of gibbsite and bayerite of around 7:3 ratio. Application of sodium dithionite and ammonium oxalate solutions for removal of free or amorphous Fe and Al from these minerals revealed that only peak intensities of Al-hydroxide system were enhanced upon Al-extraction by oxalate solution even though dithionite solution was much powerful to extract Fe from Fe-hydrous oxide systems. Original(wet) Fe-hydrous oxide A has the highest specific surface and surface charge development(negative and positive), and the greatest amount of less than $2{\mu}m$ sized particles. Specific surface and clay sized particles(less than $2{\mu}m$) of Fe-hydrous oxide A, however, were drastically reduced upon dehydration($P_2O_5$ and oven drying) compare to the rest minerals. The Z.P.C. of these synthetic minerals were 8.0-8.5, 7.5-8.0 and 5.5-6.0 for Fe-hydrous oxide A, B and Al-hydroxide, respectively.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.25 no.1
• /
• pp.84-103
• /
• 2012

Objectives : The middle school students'life style were studied with focus on Body Mass Index(BMI). Information was collected during 1st June 2009 to 10th July from 397 students(both male and female) by the subjective survey centered on personal characteristic, understanding about health in general, everyday activities, eating habits, preference in food, understanding about diet and obesity, and thoughts about fitness and diet. Methods : Students were selected from six classes by convenience sampling, then the final analysis was performed on 397 self-administered questionnaires, excepting 5 questionnaires, which have insincere answers. The data collection was carried out by SPSS(V.14.0 English Version), and the data was verified by $x^2$-test, ANOVA, multiple regression analysis. Results and Conclusion : The survey subjects were in the following distribution of body weights - underweight: 63.6%, normal weight: 29.5% and 6.9% were overweight. There was significantly different between BMI and mothers' occupation and satisfaction with school life(p<0.05). As for the analysis(multiple regression analysis) on understanding about health, the factors that affect BMI are self recognition of figure and efforts to reduce weight. In terms of efforts for one's own health, 78.2% of under weight and 82.3% of normal weight were taking active initiatives. But 85.2% of the overweight students were not giving any efforts. As for the free time activities, more than half answered, 'playing with computers'(48.4 - 66.7%, 1.57 hours on average). As for TV, on average, 2.03 hours were spent in overall. And it turned out that the overweight students spent more time watching TV by 46.49 minutes(0.77 hours) on average(p<0.05). 7.4 hours was the average sleeping time. As for the eating habit,'quantity of meal, snack, meal between meals, fat reduction, and supplementary food'were shown to be related to the BMI(p<0.05). The instant food, meat and sweet food were shown to be also related to the BMI. In terms of knowledge about overweight and diet, only 8 students(2% of the total) answered all 10 questions correct. On average, 7-8 questions were correctly answered(53.9 %). When the scores were analyzed against the BMI by classifying the scores to high, middle and low categories, it showed a relationship by different weight group(p<0.02), and the overweight students had higher score by 0.82 compared to the underweight students. When thoughts and attitude on fitness and diet were analyzed in relationship to the BMI, the result was only - "I try to eat fruits more often"(fruits)(p<0.00).

• Research in Plant Disease
• /
• v.20 no.1
• /
• pp.8-14
• /
• 2014

The socio-network activities for regional governments, agricultural research institutes, developing agencies and policy makers of any countries are very crucial and important to take into account the root cause of current problems faced by farmers. The survey was conducted in South Korea during the period January, 2008 to August, 2012 in order to shed light on prevalence of different diseases on watermelon in different regions and to better understand farmers' knowledge and perceptions for following watemelon's growing procedures and practices. A total of 590 cases were reported on 573 watermelon growers with highest 87.1% in Jeonbuk, 4.7% in Jeonnam, and 8.2% in other regions such as Gyeongbuk, Gyeongnam, Chungnam, Gwangju, Gyeonggi, Daegu, Gangwon, Changwon and Seoul. The maximum percentages of cases recorded were related to diseases and insect pest (38.6%) followed by physiological disorder (29.7%), cultural practices (18.8%), soil and fertilizer (9.0%), herbicide (2.9%) and others (1.0%). It was observed that the manifestation aspects of the diseases were changed due to increasing in proportion of 'in-facility' cultivation to 12,995 ha compared to 'open-field' cultivation (2,722 ha). The present survey revealed the necessity to reduce the damages incurred at watermelon farms as soon as possible through the breeding program to develop resistant cultivar, use of pathogen-free propagating plants, and efficient prevention of pathogen by regular monitoring of watermelon plants at farms.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.4
• /
• pp.22-33
• /
• 2006

The objective of this paper is to discuss geographic information policies and strategies of British government and suggest effective policies for Korea National GIS project GIS that has been implemented geographic information infrastructures into public sectors and private markets for the last ten years. To obtain the research aim, this paper reviews the main factors of the Britain GIS project such as distribution structure and process of GI markets, government policies and strategies that are led by Ordnance Survey, most leading mapping agency in the UK. In conclusion, some issues have been explored with reference to the experiences of the Britain GIS projects. The first of these is the nature of geographic information and the second concerns the notion of the circulation policies of spatial data, and the last proposes Korea GIS policies and strategies for successful geographic information and spatial data implementation. The findings of the analysis of the Britain GIS development indicate that a shift began to take place from central government coordinate toward more extensive utilization of private and commercial sectors. This reflects both the increasing importance of geospatial data circulation in all levels of GIS stakeholders. Finally these discussions are particularly to be the issues where multi-agency collaboration of Korea government is concerned and can take the form of joint ventures by consortiums of both involving data producers and data users in order to increase commercial participation for value-added geospatial items, and to encourage both research and development sectors with low or free price policies.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.1 s.9
• /
• pp.1-12
• /
• 2006

In order to estimate a dynamic origin and destination demand between on and off-ramps in the freeways, a traffic flow theory can be used to calculate a link distribution proportion of traffics moving between them. We have developed a dynamic traffic estimation model based on the three-phase traffic theory (Kerner, 2004), which explains the complexity of traffic phenomena based on phase transitions among free-flow, synchronized flow and moving jam phases, and on their complex nonlinear spatiotemporal features. The developed model explains and estimates traffic congestion in terms of speed breakdown, phase transition and queue propagation. We have estimated the link, on and off-ramp volumes at every time interval by using traffic data collected from vehicle detection systems in Korea freeway sections. The analyzed results show that the developed model describes traffic flows adequately.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.1
• /
• pp.5-14
• /
• 2003

Principles of a novel pulse growing method are described. The method realized in the crystal growing on a seed from melts under raw melt feeding provided a more reliable control of the crystallization process when producing large alkali halide crystals. The slow natural convection of the melt in the crucible at a constant melt level is intensified by rotating the crucible, while the crystal rotation favors a more symmetrical distribution of thermal stresses over the crystal cross-section. Optimum rotation parameters for the crucible and crystal have been determined. The spatial position oi the solid/liquid phase interface relatively to the melt surface, heaters and the crucible elements are considered. Basing on that consideration, a novel criterion is stated, that is, the immersion extent of the crystallization front (CF) convex toward the melt. When the crystal grows at a <> CF immersion, the raised CF may tear off from the melt partially or completely due to its weight. This results in avoid formation in the crystal. Experimental data on the radial crystal growth speed are discussed. This speed defines the formation of a gas phase layer at the crystal surface. The layer thickness il a function of time a temperature at specific values of pressure in the furnace and the free melt surface dimensions in the gap between the crystal and crucible wall. Analytical expressions have been derived for the impurity component mass transfer at the steady-state growth stage describing two independent processes, the impurity mass transfer along the <> path and its transit along the <> one. The heater (and thus the melt) temperature variation is inherent in any control system. It has been shown that when random temperature changes occur causing its lowering at a rate exceeding $0.5^{\circ}C/min$, a kind of the CF decoration by foreign impurities or by gas bubbles takes place. Short-term temperature changes at one heater or both result in local (i.e., at the front) redistribution of the preset axial growth speed.