• Computers and Concrete
• /
• v.13 no.2
• /
• pp.271-290
• /
• 2014

In this study, structural irregularities in plan, which has a considerable effect on earthquake behavior of buildings, have been investigated in detail based on Turkish Earthquake Code 2007. The study consists of six main parametric models and a total of 144 sub-models that are grouped based on RC structural systems such as frame, frame + rigid core, frame with shear wall, and frame with shear wall + rigid core. All models are designed to have both symmetrical plan geometry and regular rigidity distribution. Changes in the earthquake behavior of buildings were evaluated according to the number of storeys, number of axes and the configuration of structural elements. Many findings are obtained and assessed as a result of the analysis for each structural irregularity. The study shows that structural irregularities can be observed in completely symmetric buildings in terms of plan geometry and rigidity distribution.

• Industrial Engineering and Management Systems
• /
• v.14 no.2
• /
• pp.183-195
• /
• 2015

In this paper, we propose a two-stage group acceptance sampling plan for generalized inverted exponential distribution under truncated life test. Median life is considered as a quality parameter. Design parameters are obtained to ensure that true median life is longer than a given specified life at certain level of consumer's risk and producer's risk. We also explore situations under which design parameters based on median lifetime can be used for other percentile points. Tables and specific examples are reported to explain the proposed plans. Finally a real data set is analyzed to implement the plans in practical situations and some suggestions are given.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.557-558
• /
• 2006

In all conventional sintered PM products, the pores present are of two types, primary and secondary. Primary pores forming during compaction and latter during sintering, due to penetration of formed liquid through the matrix grain boundary. Effect of carbon addition on diffusion of Cu in SH737-2Cu system was investigated. After compaction and transient liquid phase sintering at $1120^{\circ}C$ and $1180^{\circ}C$, samples were characterized for densification, showing rise in sintering density and reduction in swelling on carbon addition. Quantitative microstructural characterization (shape factor and pore size) revealed bimodal distribution for 0% carbon, more rounded pores for 0.9% carbon and higher sintering temperature, and pore coarsening at higher sintering temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.412-413
• /
• 2006

The electrical conduction mechanism of ITO / Terbium tris - (1 - phenyl - 3 - methyl - 4 - (tertiarybutyryl) - pyrazol - 5 - one) triphenylphosphine oxide [$(tb-PMP)_3Tb-(Ph_3PO)$]/Mg/Al devices has been investigated. The calculation of electric field in single layer organic layer between cathode and anode shows the uniform distribution for the electron injection barrier of over 1.4 eV. The measured current-voltage curve shows well matching with the calculated curve based on the tunneling injection of electron under the uniform distribution of electric field.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.6
• /
• pp.234-240
• /
• 2011

Electrically tunable focusing liquid crystal (LC) lenses are reviewed in this paper. The distribution of the orientations of LC directors which is controlled by electric fields results in a distribution of refractive indices of LC directors. The incident light can be modulated by the electrically tunable lens-like phase difference of the LC lens. We introduce the basic operating principles of LC lenses and discuss the structures of LC lenses. The major challenges of LC lenses are also discussed. We believe this paper provides a guideline for basic understanding of LC lenses.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.7
• /
• pp.509-512
• /
• 2010

The thermal distribution of 2D and 3D p-n photovoltaic diode structures with and without surface texturing has been studied. By analysis of the numerical simulation results of the I-V characteristics and lattice temperature distributions the effect of different texturing structures on the characteristics of silicon p-n photovoltaic devices has been studied systematically. The efficiency of the device having surface texturing shows more than ~2% enhancement compared to the reference devices which did not have texturing. In addition, the effect of the density of the texturing groove has been studied and it has been confirmed that the texturing structure not only improves the light trapping but also plays an important role in the heat radiation.

• Communications for Statistical Applications and Methods
• /
• v.17 no.3
• /
• pp.319-326
• /
• 2010

In this paper, a new group sampling plan for the lot acceptance is proposed for the time truncated life test, which can be utilized when multi-item testers are implemented. The design parameters are found using the two-point approach such that the producer's and consumer's risks are satisfied simultaneously at the acceptable reliability level and the lot tolerance reliability level, respectively. The case of Weibull distribution is described to illustrate the procedure that can be used when the quality level is expressed by a multiple of the specified life. The advantage of the proposed plan is demonstrated by comparing with the existing plan in terms of the sample size required. The tables are constructed and some examples are given to illustrate the procedure developed here.

• Macromolecular Research
• /
• v.16 no.4
• /
• pp.314-319
• /
• 2008

An image analysis processing method for the measurement of nanofiber diameter was developed. For the analysis, scanning electron microscopy (SEM) images of electrospun fiber were prepared and applied to the individual measurement of the fiber diameter by using the developed and the traditional manual methods. Both methods provided a similar fiber distribution. The fiber average diameters were similar but the variance of the new method was larger than that of the manual method. The average diameters from the two methods exhibited a linear relationship with a high coefficient. The developed method can be used as a practical tool to estimate the fiber diameter of the electro spun web.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.9
• /
• pp.96-102
• /
• 2009

In this study, performs analysis of the life of parallel opening type pneumatic chucks that are usually applied in the factory automation line. Pneumatic chucks have complicated failure cause because they are organized as a complex of various elements. Therefore, we analyzed the main failure mode of pneumatic chuck, and then performed life test and performance test according to the international standards. On the basis of these processes, shape parameter of pneumatic chuk is proposed that is the main factor for the calculation of zero failure test time for the reliability of pneumatic chuck and their data analysis of life distribution.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.258-258
• /
• 2012

In frequency analyses of hydrological data, it is necessary for the interested variables to be homogenous and independent. However, recent evidences have shown that the occurrence of extreme hydro-meteorological events is influenced by large-scale climate variability, and the assumption of homogeneity does not generally hold anymore. Therefore, in order to associate the non-homogenous characteristics of hydro-meteorological variables, we propose the parameter estimation method of probability models using meta-heuristic algorithms, specifically harmony search. All the weather stations in South Korea were employed to demonstrate the performance of the proposed approaches. The results showed that the proposed parameter estimation method using harmony search is a comparativealternative for the probability distribution of the non-homogenous hydro-meteorological variables data.