• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.759-764
• /
• 2018

3D porous carbon electrodes (cNPIM), prepared by solution casting of a polymer of intrinsic microporosity (PIM-1) followed by nonsolvent-induced phase separation (NIPS) and carbonization are presented. In order to effectively control the pore size of 3D porous carbon structures, cNPIM was prepared by varying the THF ratio of mixed solvents. The SEM analysis revealed that cNPIMs have a unique 3D macroporous structure having a gradient pore structure, which is expected to grant a smooth and easy ion transfer capability as an electrode material. In addition, the cNPIMs presented a very large specific surface area ($2,101.1m^2/g$) with a narrow micropore size distribution (0.75 nm). Consequently, the cNPIM exhibits a high specific capacitance (304.8 F/g) and superior rate capability of 77% in an aqueous electrolyte. We believe that our approach can provide a variety of new 3D porous carbon materials for the application to an electrochemical energy storage.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.2
• /
• pp.99-108
• /
• 2018

The purpose of this study is to determine the precise height in mountainous areas of South Korea and Jiri mountain area was selected as a test bed for the study. Gravity observation and GNSS surveying were performed for 44 BM(Benchmark) points in the test bed and calculate the height and the height correction. In the calculation, the dynamic correction amount, the orthometric correction amount and the normal correction amount were calculated, and the dynamic height and orthometric height and the normal height were calculated considering each correction amount. The results showed that the difference between normal gravity and observed gravity and also the difference between orthometric correction and the normal correction. In addition, the results of the comparison of the present official BM height and the computed orthometric height in this study show that Korean height system should be shifted from the normal orthometric height system to the orthometric height system. Because the difference between the orthometric correction and the normal correction within the test bed indicated a distribution of at a minimum of -234.41 mm up to 196.925 mm, and the difference between the present official BM height and the calculated orthometric height were distributed from -0.121m to 0.011 m.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.550-560
• /
• 2018

Many countries have provided support for research and development and implemented policies for Advanced Driver Assistance Systems (ADAS) for enhancing the safety of vehicles. With such efforts, the toll of casualties due to traffic accidents has decreased gradually. Korea has exhibited the lowest toll of casualties due to traffic accidents and is ranked 32nd in mortality among the 35 OECD members. Traffic accidents typically fall into three categories depending on the cause of the accident: vehicle to vehicle (V2V), vehicle to pedestrian (V2P), and vehicle independent. Most accidents are caused by drivers' mistakes in recognition, judgment, or operation. ADAS has been proposed to prevent and reduce accidents from such human errors. Moreover, the global automobile industry has recently been developing various safety measures, but on-road tests are still limited and contain various risks. Therefore, this study investigated the international standards for evaluation tests with regard to the assessment techniques in braking capability to cope with the limitations of on-road tests. A theoretical formula for braking force and a control algorithm are proposed, which were validated by comparing the results with those from an on-road test. These results verified the braking force depending on the functions of ADAS. The risks of on-road tests can be reduced because the proposed theoretical formula allows a prediction of the tendencies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.488-496
• /
• 2018

This study examined the Gangwon Province's current implementation of its elimination of invasive plants and explored a plan to effectively manage invasive plants. The percentage of the distribution of the plants was 39.6% for riverside areas, 23.3% for roadside areas, 12.4% for roadside & riverside areas, and 4.6% for areas around farm land and river banks. To ensure the systematic management of invasive plants, the current study suggests a) developing an invasive plants monitoring and management system; b) reinvigorating the participation of residents, private organizations, and military posts; c) planting of native replacement plants and the conversion of the locations as attractions, and d) nurturing the project for using invasive plants. For policy directions to be pursued based on the results of the study, the following are suggested: a) improving laws and systems regarding invasive plants, b) developing a cooperative system for managing invasive plants, c) implementing the training of civilian professionals, d) implementing the elimination of invasive plants, e) developing replacement plants for cities and counties, f) fostering industries that tap into invasive plants, and g) using the Han River Water System Management Fund for funding and greater efficiency.

• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.303-310
• /
• 2018

Purpose: This research was conducted to determine the design factors of a seed-metering device for the development of a seeder. The device allows the seeder to sow precisely one to three seeds of foxtail millet and sorghum. To obtain fundamental information regarding the design of the seed-metering device, examination of the physical properties of foxtail millet and sorghum was conducted. Methods: Based on the results of an adaptability test using an existing seeder with foxtail millet and sorghum, an experimental roller-type seed-metering device was made. The seeding factors considered during the experiment were the width, length, and depth, as well as the shape of the groove in the seed-metering roller. By adapting an analysis of variance, the experimental results of the seeding factors were analyzed. Results: The measured results of the respective lengths and widths of the seeds were 2.11 and 1.64 mm for foxtail millet, and 3.68 and 3.32 mm for sorghum, respectively. The weight of 1,000 seeds was 2.43 g for foxtail millet and 17.5 g for sorghum. The seeds were of an elliptical shape, considering the length and width. A sieve analysis showed that the size distribution of foxtail millet was quite regular whereas that of sorghum was irregular. Conclusions: The seeding results showed that the rates of incorrect planting were low when the groove of the roller-type metering device is an elliptical type. To sow one to three seeds, the groove of roller-type metering devices $2.0mm{\times}4.0mm{\times}1.5mm$ ($width{\times}length{\times}depth$) for foxtail millet, and $4.0mm{\times}8.0mm{\times}3.0mm$ and $4.5mm{\times}8.0mm{\times}3.0mm$ ($width{\times}length{\times}depth$) for Sorghum.

• Journal of Ecology and Environment
• /
• v.43 no.1
• /
• pp.43-60
• /
• 2019

Background: Tropical montane forests played an important role in the provision of ecosystem services. The intense degradation and deforestation for the need of agricultural land expansion result in a significant decline of forest cover. However, the expansion of agricultural land did not completely destruct natural forests. There remain forests inaccessible for agricultural and grazing purpose. Studies on these forests remained scant, motivating to investigate biomass and soil carbon stocks. Data of biomass and soils were collected in 80 quadrats ($400m^2$) systematically in 5 forests. Biomass and disturbance gradients were determined using allometric equation and disturbance index, respectively. The regression modeling is employed to explore the spatial distribution of carbon stock along disturbance and environmental gradients. Correlation analysis is also employed to identify the relation between site factors and carbon stocks. Results: The result revealed that a total of 1655 individuals with a diameter of ${\geq}5cm$, representing 38 species, were measured in 5 forests. The mean aboveground biomass carbon stocks (AGB CS) and soil organic carbon (SOC) stocks at 5 forests were $191.6{\pm}19.7$ and $149.32{\pm}6.8Mg\;C\;ha^{-1}$, respectively. The AGB CS exhibited significant (P < 0.05) positive correlation with SOC and total nitrogen (TN) stocks, reflecting that biomass seems to be a general predictor of SOCs. AGB CS between highly and least-disturbed forests was significantly different (P < 0.05). This disturbance level equates to a decrease in AGB CS of 36.8% in the highly disturbed compared with the least-disturbed forest. In all forests, dominant species sequestrated more than 58% of carbon. The AGB CS in response to elevation and disturbance index and SOC stocks in response to soil pH attained unimodal pattern. The stand structures, such as canopy cover and basal area, had significant positive relation with AGB CS. Conclusions: Study results confirmed that carbon stocks of studied forests were comparable to carbon stocks of protected forests. The biotic, edaphic, topographic, and disturbance factors played a significant variation in carbon stocks of forests. Further study should be conducted to quantify carbon stocks of herbaceous, litter, and soil microbes to account the role of the whole forest ecosystem.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.2
• /
• pp.209-216
• /
• 2019

Objective: We compare the effects of three different approved sources of supplemental zilpaterol on growth-performance responses and carcass characteristics of finishing lambs. Methods: Twenty four Pelibuey${\times}$Katahdin lambs ($46.75{\pm}2.43kg$) were used in a 33-day feeding trial. Lambs were fed a dry rolled corn-based finishing diet. Treatments consisted of the non-supplemental basal diet (Control) versus the basal diet supplemented with 125 mg zilpaterol/kg of diet (as fed basis) from three commercial sources marketed in Mexico: Zilmax (ZIL), Grofactor, and Zipamix. Results: Compared to controls, zilpaterol (ZH) supplementation did not affect dry matter intake (DMI), but increased carcass adjusted daily weight gain (ADG, 36.7%), gain efficiency (34.2%), and dietary net energy (26.0%), and decreased (23.4%) the ratio of observed:expected DMI. Compared to controls, supplemental ZH increased hot carcass weight (6.4%), dressing percentage (3.2%), m. longissimus thoracis (LM) area (15.6%), and shoulder muscle:fat ratio (28.7%), but decreased kidney-pelvic-heart fat, and fat thickness. Supplemental ZH increased 10.9% and 14.3% whole cut weight of loin and leg, respectively, and the proportion (as percentage of cold carcass weight) of leg (4.3%). These increases were reflected in greater forequarter and hindquarter weights. Lambs fed ZH increased (4.6%) empty body weight (EBW) and reduced (14.7%) liver/spleen weight (as g/kg EBW). Likewise, ZH supplementation tended (p = 0.08) to lower (8.9%) visceral fat. Growth performance, energetic efficiency, hot carcass weight, dressing percentage, LM area and whole cuts were not different across supplemental ZH sources. However, compared with non-supplemented controls, only ZIL appreciably decreased carcass fat distribution, including fat thickness, percentage kidney pelvic and heart fat, shoulder fat, and visceral fat. Conclusion: Supplemental ZH increases ADG, gain efficiency, carcass dressing percentage, and LM area. The magnitude of these responses was similar among ZH sources. Nevertheless, compared with non-supplemented controls, only ZIL appreciably decreases carcass fat. The basis for this is uncertain, but indicative that some practical differences in zilpaterol bio-equivalency may exist across commercial sources tested.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.898-906
• /
• 2018

To investigate the effect of yellow dust on phytoplankton, a field survey and physiological experiments were carried out in the waters near Taean Peninsula from April 22 to 26, 2006, when yellow dust occurred. Phytoplankton populations during the yellow dust period were in the range of $26{\sim}290{\times}10^3cells{\cdot}L^{-1}$, a somewhat low standing crop. An increase in diatoms (a main taxonomic group), especially benthic diatoms such as Paralia sulcate, a typical species for active mixed sea water areas, was also remarkable. In addition, the Chl-a concentration after yellow dust exceeded the Chl-a concentration change range according to the tide before yellow dust. As the concentration of yellow sand increased in a yellow sand treatment experiment, primary productivity decreased, and the maximum assimilation number showed the same tendency. In the 48h culture experiment, primary productivity of the test group was lower than that of the control group at the early stage (T0) of yellow sand treatment, but after 48 hours (T48), the test group showed higher primary productivity than the control group. In particular, the primary productivity of the test group significantly increased to 321 % after 48 hours. Therefore, strong physical environment accompanied by yellow dust may temporarily inhibit the growth of phytoplankton in the waters adjacent to China in the early stage of yellow dust, but the formation of stable water mass has also been identified as a potential factor promoting the growth of phytoplankton.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.4
• /
• pp.114-125
• /
• 2012

The purpose of this study is to analysis chromaticity, granulometry, main chemical composition and mineral crystal structure of wall soils excavated from Poongnatoseong Earthen Castle using color reader, XRD, particla size analyzer. The analysed soils of Poongnatoseong Earthen Castle were yellowish brown and isabella. All samples were sands or sands including silty soil(SW~SC) and showed similar granulometry, chemical composition and mineral crystal structure, which were characteristics of construction materials suitable for modern road or airstrip. As resulting in comparison with 4 factors from chromaticity, granulometry, main chemical composition and mineral crystal structure, we decided that the control soils(PNS) near by Poongnatoseong Earthen Castle were not to be used for the castle wall construction We presumed that there was a huge soil distribution area for the wall construction around Poongnatoseong Earthen Castle. For further study, we will make a comparison analysis all kinds of soil characteristics. And then we can understand correctly about wall soils producing area, construction method, repair method and time of Poongnatoseong Earthen Castle.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.67-74
• /
• 2019

In this paper the response factor is investigated for middle and small size-RC slab aged bridges. The response factor consists of static and dynamic response factors and is a main parameter in the frequency based-bridge load carrying capacity prediction model. Static and dynamic response factors are determined based on the frequency variation and the impact factor variation respectively between current and previous (or design) states of bridges. Here, the impact factor variation is figured out using the impact factor response spectrum which provides the impact factor according to the natural frequency of bridges. In this study, four actual RC slab bridges aged over 30 years after construction are considered and their span length is 12m. The dynamic loading test in field using a dump truck and eigenvalue analysis with FE models are conducted to identify the current and previous (or design) state-natural frequencies of the bridges, respectively. For more realistic considerations in the moving loading situation, the impact factor response spectrum is developed based on tri-axle moving loads representing the dump truck load distribution and various supporting conditions such as simply supported and both ends fixed conditions. From the results, the response factor is widely ranged from 0.21to 0.91, showing that the static response factor contributes significantly on the results while the dynamic response factor has a small effect on the result. Compared to the results obtained from the impact factor response spectrum based on the single axle-simply supported condition, the maximum percentage difference of the response factors is below 3.2% only.