• Journal of Korea Water Resources Association
• /
• v.50 no.10
• /
• pp.661-671
• /
• 2017

The objective of this study was to analyze the flood stage considering the uncertainty caused by the river roughness coefficients and discharge. The methodology of this study involved the GLUE (Generalized Likelihood Uncertainty Estimation) to quantify the uncertainty bounds applying three different storm events. The uncertainty range of the roughness was 0.025~0.040. In case of discharge, the uncertainty stemmed from parameters in stage-discharge rating curve, if h represents stage for discharge Q, which can be written as $Q=A(h-B)^C$. Parameters in rating curve (A, B and C) were estimated by non-linear regression model and assumed by t distribution. The range of parameters in rating curve was 5.138~18.442 for A, -0.524~0.104 for B and 2.427~2.924 for C. By sampling 10,000 parameter sets, Monte Carlo simulations were performed. The simulated stage value was represented by 95% confidence interval. In storm event 1~3, the average bound was 0.39 m, 0.83 m and 0.96 m, respectively. The peak bound was 0.52 m, 1.36 m and 1.75 m, respectively. The recurrence year of each storm event applying the frequency analysis was 1-year, 10-year and 25-year, respectively.

• Journal of Korea Water Resources Association
• /
• v.51 no.6
• /
• pp.471-479
• /
• 2018

This study analyzed the peak time of drought severity and drought period using meteorological and hydrological drought indices. Standardized Precipitation Index (SPI) using rainfall data was used for meteorological drought and Streamflow Drought Index (SDI) and Standardized Streamflow Index (SSI) using streamflow data were used for the hydrological drought. This study was applied to the Cheongmicheon watershed which is a mixture area for rural and urban regions. The rainfall data period used in this study is 32.5 years (January of 1985~June of 2017) and the corresponding streamflow was simulated using SWAT. After the drought indices were calculated using the collected data, the characteristics of drought were analyzed by time series distribution of the calculated drought indices. Based on the results of the this study, it can be seen that hydrological drought occurs after meteorological drought. The difference between SDI and SPI peak occurrence time, difference in drought start date and average drought duration is greater than SSI and SPI. In general, SSI shows more severe than SDI. Therefore, various drought indices should be used at the identification of drought characteristics.

• Polymer(Korea)
• /
• v.38 no.2
• /
• pp.144-149
• /
• 2014

Large residual stresses are remained in the conventional injection molded products because of the high cavity pressure in packing phase during injection molding process. Conventional injection molding (CIM) invokes distribution of cavity pressure and it has a limitation to obtain product with uniform physical property. Multi-cavity conventional injection molding contains quality deviation among the cavities since flow imbalance occurs during filling phase. Injection compression molding (ICM) is adopted to overcome these limitations of CIM. In this study, molding characteristics of CIM and ICM have been investigated using multi-cavity injection mold. Researches were performed by both experiment and computer simulation through observations of birefringence for transparent resins, polycarbonate and polystyrene in CIM and ICM. As a result, low and uniform birefringence and mold shrinkage were showed in the specimens by ICM that could give a uniform cavity pressure. Deviation of physical property among the specimens in multi-cavity mold shown in CIM was significantly reduced in the specimens by ICM. Through this study it was concluded that the ICM in multi-cavity molding was valid for molding products with uniform property in an individual cavity and also reduced property deviation among the cavities.

• Membrane Journal
• /
• v.18 no.1
• /
• pp.65-74
• /
• 2008

NOM and fine particles are the main target materials in water treatment using membranes. Particularly, humic substances extracted from soils are frequently used in many fundamental studies representing natural organic matter in raw water for drinking water treatment. In this study, ultrafiltration (UF) of artificial humic water and natural river water was conducted and the characteristics of removal efficiency and permeability were compared. In the UF of river water, the transmembrane pressure increased in the same pattern with that of 5 mg/L humic water. For the removal of organic matter and fine particles, however, two types of feed water had shown different trends. Kaolin particles and humic acids added to artificial water were better removed, while colloids and organics in natural water were relatively poorly removed. From the $UV_{254}$ and GPC analyses, it seemed that the hydrophobicity and size of humic substances contributed to the greater removal of organic matter. The UF membrane applied for humic water also showed a higher flux recovery by caustic chemical cleaning than that for river water.

• Membrane Journal
• /
• v.27 no.5
• /
• pp.389-398
• /
• 2017

The most important characteristic of the polymer electrolyte membranes (PEMs) for fuel cells, the proton conducting ability is mainly influenced by the distribution and morphology of the water channels inside the PEMs. Non-perfluorinated hydrocarbon PEMs are known to have weaker water channels than perfluorinated PEM, Nafion, and thus relatively low proton conducting ability. In this study, we used a mesoscale simulation technique to observe the water channel formation and phase separation behavior of hydrocarbon PEM, sulfonated polyimides, under the humidification condition. It was observed that the water molecules were distributed evenly through the entire hydrophilic region, and clear water clusters were formed only in the sulfonated polyimide having high sulfonation degree. In addition, it was observed that sulfonated polyimides have a difficulty in forming water channel under the low hydrated condition. These results clearly support the theories of the formation of water channels in non-perfluorinated hydrocarbon PEMs, and also well explain the tendency of proton conducting abilities of sulfonated polyimides. Thus, it is confirmed that mesoscale simulation techniques can be very effective in analyzing phase separation behavior and water channel formation in PEMs for fuel cells and elucidating the ion conducting abilities.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.4 s.50
• /
• pp.259-264
• /
• 2006

This work carried out to analyze the physicochemical properties and investigate the assessment of heavy metal contamination of stream sediments of the Yudeung and the Gab streams in the Daejeon area. The pH of stream sediments of the Yudeung stream shows the range of weak acid and weak alkaline. Most of stream sediments contain about 80% sand grain and have low water and cation retention capacity. Hence the stream sediments are not suitable fur various plans to grow up. The analysis of heavy metals in the stream sediments shows that the concentration of Pb, Cr and Cd increases from upstream to down stream. It is likely that the trend has a relationship with the water. Contamination of stream water. The authors recommend that clay materials be replenished in the stream sediments to increase the self-purification capacity and to make the suitable condition for growing up of various plants, and that water quality of the stream which can Influence into the contamination of stream sediments be monitored.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.4
• /
• pp.233-247
• /
• 2012

We have researched the distribution and characteristics of seafloor hydrothermal deposits for the development of economic mineral deposits in the Lau Basin, Tonga since 2009. In this study, we interpreted hydrothermal alteration around TA 26 seamounts of the Tofua volcanic arc using X-ray diffraction analysis for bulk sample and preferred-oriented specimen of clay fraction. We used 2 core samples and several surface samples. Plagioclase and quartz are dominant mineral in the basement rock, whereas kaolin mineral and smectite are superior in marine surface sediments. Especially sulfate and sulfide minerals such as gypsum, barite, sphalerite, and pyrite are predominant in the vent sediments. When we compare the mineral composition between basement rock and sea surface sediments, argillic alteration zone composed of kaolin mineral and smectite could be produced by hydrothermal fluids. Based on the downcore variation of mineral assemblages, most portion of MC08H-06 core could be interpreted as argillic alteration zone composed of kaolin mineral and smectite except top 2 cm area. Various sulfate or sulfide minerals and argillic alteration zone suggest a high probability of massive sulfide deposits in the seafloor of the TA 26 seamount.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.3
• /
• pp.123-129
• /
• 2016

This study is conducted to estimate the firing temperature and condition of the 4-6th Century earthenwares excavated from the ancient tombs in the Seonggok-ri, Cheongdo through mineralogical approaches, and to contrast to the characteristics of the earthenware from the Changnyeong the adjacent area to the Cheongdo. The Cheongdo earthenware was mainly composed of quartz, pores and vitric matrix with minor parts of feldspars, felsic volcanic fragments and opaque minerals, of which quartz crystals frequently show embayed texture and pores was partly filled with amorphous quartz. Mullite, hematite and cristobalite were found by XRD spectrometer additionally, and in the SEM image the Mullite contents are evenly distributed from the central part to the marginal part. As a result, the firing temperature of the Cheongdo earthenware could be 1,100 to $1,200^{\circ}C$, which is higher than that of the Changnyeong. Distribution characteristics of mullite in the Cheongdo and the Changnyeong earthenware indicate that the Cheongdo earthenware was under the longer firing time or more homogeneous thermal condition in the kiln than the Changnyeong.

• Korean Journal of Materials Research
• /
• v.8 no.11
• /
• pp.1031-1037
• /
• 1998

To investigate the effect of cooling rate and annealing temperature on the corrosion of Zircaloy-4 and Zr-2. 5Nb alloys, autoclave corrosion tests were performed at $500^{\circ}C$ for the specimens prepared by various heat treatments. The specimens were heat-treated at $1050^{\circ}C$ for 30 minutes and cooled by ice-brine quenching, water quenching, oil quenching, air cooling, and furnace cooling. To investigate the effect of annealing temperature, the specimens were annealed at $\alpha$, ($\alpha$+$\beta$)-, and $\beta$-temperatures. It was observed from the $500^{\circ}C$ corrosion test that nodular corrosion occurred on the Zircaloy-4 alloy but did not occur on the Zr-2.5Nb alloy. The corrosion resistance of Zircaloy-4 increased with increasing the cooling rate. On the other hand, the corrosion resistance of Zr-2.5Nb decreased with increasing the cooling rate and the annealing temperature. It is suggested that corrosion resistance of Zircaloy-4 would be controlled by the distribution of Fe and Cr element in the matrix and precipitates, while that of Zr-2.5Nb alloy the niobium concentration and $\beta_{-Nb}$ phase.

• Korean Journal of Microbiology
• /
• v.45 no.2
• /
• pp.155-162
• /
• 2009

A cultivation-based approach was employed to compare the culturable bacterial diversity associated with two phylogenetically closely related marine sponges, Spirastrella abata and Spirastrella panis, which have geologically overlapping distribution patterns. The bacteria associated with sponge were cultivated using MA medium supplemented with 3% sponge extracts. Community structures of the culturable bacteria of the two sponge species were analyzed with PCR-RFLP (restriction fragment length polymorphism) based on 16S rDNA sequences. The RFLP fingerprinting of 16S rDNA digested with HaeIII and MspI, revealed 24 independent RFLP types, in which 1-5 representative strains from each type were partially sequenced. The sequence analysis showed >98.4% similarity to known bacterial species in public databases. Overall, the microbial populations of two sponges investigated were found to be the members of the classes; Alphaproteobacteria, Gammaproteobacteria, Firmicutes, and Actinobacteria. The Alphaproteobacteria were predominant in the bacterial communities of the two sponges. Gammaproteobacteria represented 38.5% of bacterial community in S. abata. Whereas only 1.6% of this class was present in S. panis. Bacillus species were dominat in S. panis. Bacillus species were found to be 44.3% of bacterial species in S. panis, while they were only 9.7% in S. abata. It is interesting to note that Planococcus maritimus (8.1%, phylum Firmicutes) and Psychrobacter nivimaris (28.9%, phylum Gammaproteobacteria) were found only in S. abata. This result revealed that profiles of bacterial communities from the sponges with a close phylogenetic relationship were highly species-specific.