• Journal of the Korean Geosynthetics Society
• /
• v.21 no.3
• /
• pp.11-19
• /
• 2022

Underground environmental infrastructure and energy production facilities, which are recognized as avoidable facilities such as landfills, are emerging as an important social issue due to urbanization and economic growth. It is necessary to analyze the stability according to various ground conditions and load conditions for the construction of large-scale underground complex plants. In this paper, horizontal/vertical displacement and stress distribution according to the load condition and construction process were analyzed using finite element analysis (FEM), Based on the analysis results of various conditions, factors to be considered in the detailed design and construction of the underground complex plant were reviewed and the implications on design factors (Intermediate wall installation status, Pre-reinforcing area, etc.) for underground large space construction were derived.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.24 no.3
• /
• pp.25-31
• /
• 2022

Low-temperature germinability (LTG) is an important trait for the direct seeding of rice in temperate and high altitudes regions. Water temperature of rice fields at sowing season is frequently under 15℃ in Korea, resulting in poor seedlings establishment. The objective of this study was to phenotypically and genetically evaluate 600 rice germplasm composed of six rice subpopulations. In the phenotypic evaluation, aus (AUS) showed the highest visual rating (VR) and germination rate (GR) of 5 and 83.1%, respectively, than other subpopulations. The lowest value of VR (7.1) and GR (53.1%) was observed in aromatic (ARO) subpopulation. Association of the phenotype for LTG with the genotype for qLTG3-1, a major QTL for LTG, and other three SNP markers (LTG_8, qLTG4b-1, qLTG2-6) was conducted. The results suggested that the allele distribution of two markers, qLTG3-1 and qLTG2-6, affects the difference in VR and GR between subpopulations. qLTG4b-1 and LTG_8 were also highly significant with LTG in all subpopulations except that qLTG4b-1 did now show significance in AUS. Therefore, the combination use of these four markers might be effective for evaluation of LTG in rice germplasm.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.5
• /
• pp.111-120
• /
• 2021

A tractor is an agricultural machine that performs farm work, such as cultivation, soil preparation, loading, bailing, and transporting, through attached working implements. Farm work must be carried out on time per the growing season of crops. As a result, the reliability of a tractor's transmission is vital. Ideally, the transmission's design should reflect the actual load during agricultural work; however, configuring such a measurement system is time- and cost-intensive. The design and analysis of a transmission are, therefore, mainly performed by empirical methods. In this study, a tractor with a measurement system was used to measure the actual working load in the field. Its hydro-mechanical transmission was then analyzed using the measured load. It was found that the velocity factor, load distribution factor, lubrication factor, roughness factor, relative notch sensitivity factor, and life factor affect the gear strength of the transmission. Also, loading conditions have a significant influence on the reliability of the transmission. It is believed that transmission reliability can be enhanced by analyzing the actual load on the transmission, as performed in this study.

• Journal of Korea Trade
• /
• v.24 no.6
• /
• pp.37-60
• /
• 2020

Purpose - The purpose of this study is to investigate the direct and indirect impact of innovation space factors on the growth of semiconductor enterprises. Design/methodology - This empirical study uses the financial statements of 83 semiconductor listed companies in 23 provinces from 2004 to 2019 approved by CSRC (2019). A stepwise regression and backward regression are employed in order to examine the role of innovation space to expand technology investment in promoting business growth and uses South Korean Samsung's investment in China as a test case. Findings - Results indicate that innovation space, technology input, geographical area, owner's background, operating years and financing liabilities all contribute to a boost in business growth. Factors such as carbon emission, financial liberalization, government efficiency, technology input, and financing liabilities further influence management growth. Innovation space follows a nonlinear pattern, and this plays a positive role in magnifying the influence of technology on management growth. Additionally, operations of the state-owned companies and expansionary financing enterprises are influenced by the external economy. Regarding the spatial distribution, the Samsung investment in 24 companies in China shows that Samsung focuses on the acquisition of scarce resources for semiconductor production as a component of its investment and innovation strategy. Originality/value - Even though prior research has considered the concepts studied here, this study contributes to empirically evaluate the direct impact of innovation space on business growth, and the indirect impact of innovation space on business growth through technology investment. This study includes an in-depth discussion of the practical effects that innovation space has on China's economy, using a case of South Korean Samsung's investment in China as a test the empirical findings.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.2
• /
• pp.161-168
• /
• 2021

In this paper, a Silent Speech Interface (SSI) technology was proposed in which Doppler frequency shifts of the reflected signal were used to synthesize the speech signals when 40kHz ultrasonic signal was incident to speaker's mouth region. In SSI, the mapping rules from the features derived from non-speech signals to those from audible speech signals was constructed, the speech signals are synthesized from non-speech signals using the constructed mapping rules. The mapping rules were built by minimizing the overall errors between the estimated and true speech parameters in the conventional SSI methods. In the present study, the mapping rules were constructed so that the distribution of the estimated parameters is similar to that of the true parameters by using Generative Adversarial Networks (GAN). The experimental result using 60 Korean words showed that, both objectively and subjectively, the performance of the proposed method was superior to that of the conventional neural networks-based methods.

• Structural Engineering and Mechanics
• /
• v.82 no.2
• /
• pp.173-189
• /
• 2022

This study presents an experimental and numerically study about the effects of fiber reinforcement ratio on the behavior of concrete-filled steel tubes (CFST) under dynamic impact loading. In literature have examined the behavior of GFRP and FRP wrapped strengthened CFST elements impact loads. However, since the direction of potential impact force isn't too exact, there is always the probability of not being matched the impact force of the area where the reinforced. Therefore, instead of the fiber textile wrapping method which strengthens only a particular area of CFST element, we used fiber-added concrete-filled elements which allow strengthening the whole element. Thus, the effect of fiber-addition in concrete on the behavior of CFST elements under impact loads was examined. To do so, six simply supported CFST beams were constructed with none fiber, 2% fiber and 10% fiber reinforcement ratio on the concrete part of the CFST beam. CFST beams were examined under two different impact loads (75 kg and 225 kg). The impactors hit the beam from a 2000 mm free fall during the experimental study. Numerical models of the specimens were created using ABAQUS finite element software and validated with experimental data. The obtained results such as; mid-span displacement, acceleration, failure modes and energies from experimental and numerical studies were compared and discussed. Furthermore, the Von Misses stress distribution of the CFST beams with different ratio of fiber reinforcements were investigated numerically. To sum up, there is an optimum amount limit of the fiber reinforcement on CFST beams. Up to this limit, the fiber reinforcement increases the structural performances of the beam, beyond that limit the fiber reinforcement decreases the performances of the CFST beam under transverse impact loadings.

• Steel and Composite Structures
• /
• v.44 no.1
• /
• pp.81-89
• /
• 2022

The purposes of the present work it to study the effect of shear deformation on the static post-buckling response of simply supported functionally graded (FGM) axisymmetric beams based on classical, first-order, and higher-order shear deformation theories. The behavior of postbuckling is introduced based on geometric nonlinearity. The material properties of functionally graded materials (FGM) are assumed to be graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents. The equations of motion and the boundary conditions derived using Hamilton's principle. This article compares and addresses the efficiency, the applicability, and the limits of classical models, higher order models (CLT, FSDT, and HSDT) for the static post-buckling response of an asymmetrically simply supported FGM beam. The amplitude of the static post-buckling obtained a solving the nonlinear governing equations. The results showing the variation of the maximum post-buckling amplitude with the applied axial load presented, for different theory and different parameters of material and geometry. In conclusion: The shear effect found to have a significant contribution to the post-buckling behaviors of axisymmetric beams. As well as the classical beam theory CBT, underestimate the shear effect compared to higher order shear deformation theories HSDT.

• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.106-113
• /
• 2022

The structural safety of the basic design model of the linear actuator for the individual blade pitch control of eVTOL personal aircraft was investigated. Stress analysis based on the finite element method was conducted, and the margin of safety was calculated to examine the structural safety under stall load conditions. Additionally, fatigue analysis was conducted to evaluate the fatigue life of the linear actuators under operating conditions. The load history with the blade pitch angle was calculated using multi-body dynamics analysis, and the static load analysis was used to obtain the stress distribution for the rated load. As a result, it was confirmed that the safety margins exceeded zero, and the fatigue lives of all linear actuator components exceeded 107 cycles, indicating a safe structural range.

• Journal of the Korean Society of Radiology
• /
• v.16 no.6
• /
• pp.727-733
• /
• 2022

This study was conducted aiming at understanding types of the image of radiological technologists in private hospitals targeting university students majoring in radiology, and suggesting a strategy for improving the image of radiological technologists in private hospitals according to the categorized types. To achieve the foregoing objectives, this study applied Q methodology which is suitable for research of human subjectivity. With 31 university students majoring in radiology as a P-sample, this study employed forced distribution method with 20 Q-samples. Results show that the image of radiological technologist in private hospitals perceived by university students majoring in radiology was divided into three types as 'Unstable future type', 'Affirmative working atmosphere type' and 'Dissatisfied organizational system type'. This study understood characteristics of each type and is expected to be used as basic data for improvement of radiological technologists in private hospitals.

• The Korea Journal of Herbology
• /
• v.34 no.1
• /
• pp.1-11
• /
• 2019

Objective : An allergy to peanuts is a major cause of fatal food-induced anaphylaxis, with food allergies becoming an increasingly important health research issue. Food allergy as clinical entity has been recongnized for many years, although there is yet no general concord as to the incidence of this symptom.1) Methods : This study was undertaken to verify the effect of seeds of Canavalia gladiata (Jacq.) DC. extract (CGE) on the inhibition of allergic reactions using a cholera toxin and peanut extract-immunized food allergy mouse model. We determine whether the changes in rectal temperature were related to energy consumption owing to heat production in the body. Mast cell distribution and degranulation in the dermis and epidermis were observed with an optical microscope. Subsequently, Ara h1 levels in serum and interleukin (IL)-4, IL-10, and $IFN-{\gamma}$ levels in cultured supernatants of splenocytes were measured. Results : CGE treatment significantly attenuated the secretion of the Ara h1 antibody in serum and splenocytes. Ara h 1 was undetected in the cholera toxin and peanut extract-immunized food allergy mouse model. Improvement in ear tissue inflammation symptoms was the CGE experimental group. In the control group and peanut extract control group, the expression of mast cells was higher, whereas that in the CGE experimental group was significantly lower. Conclusion : CGE causes suppression in a food allergy mouse model via the inhibition of Ara h1 secretion, and might be useful for developing functional health foods.