• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.4
• /
• pp.217-222
• /
• 2003

A new two-dimensional analytical model for the potential distribution and drain-induced barrier lowering (DIBL) effect of fully depleted short-channel Silicon-on-insulator (SOI)-MESFET's has been presented in this paper. The two dimensional potential distribution functions in the active layer of the device is approximated as a simple parabolic function and the two-dimensional Poisson's equation has been solved with suitable boundary conditions to obtain the bottom potential at the Si/oxide layer interface. It is observed that for the SOI-MESFET's, as the gate-length is decreased below a certain limit, the bottom potential is increased and thus the channel barrier between the drain and source is reduced. The similar effect may also be observed by increasing the drain-source voltage if the device is operated in the near threshold or sub-threshold region. This is an electrostatic effect known as the drain-induced barrier lowering (DIBL) in the short-gate SOI-MESFET's. The model has been verified by comparing the results with that of the simulated one obtained by solving the 2-D Poisson's equation numerically by using the pde toolbox of the widely used software MATLAB.

• Communications for Statistical Applications and Methods
• /
• v.19 no.5
• /
• pp.697-704
• /
• 2012

The maximum likelihood(ML) estimation of the scale parameters of an exponential distribution based on progressive Type II censored samples is given. The sample is multiply censored (some middle observations being censored); however, the ML method does not admit explicit solutions. In this paper, we propose multiply progressive Type II censoring. This paper presents the statistical inference on the scale parameter for the exponential distribution when samples are multiply progressive Type II censoring. The scale parameter is estimated by approximate ML methods that use two different Taylor series expansion types ($AMLE_I$, $AMLE_{II}$). We also obtain the maximum likelihood estimator(MLE) of the scale parameter under the proposed multiply progressive Type II censored samples. We compare the estimators in the sense of the mean square error(MSE). The simulation procedure is repeated 10,000 times for the sample size n = 20 and 40 and various censored schemes. The $AMLE_{II}$ is better than MLE and $AMLE_I$ in the sense of the MSE.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.3
• /
• pp.551-559
• /
• 2016

The present trend of increasing the penetration levels of Distributed Generator (DG) in the distribution network has made the issue of Islanding crucial for the reliable operation of the network. The islanding, if not detected early may lead to the collapse of the system as it can drive the distribution system to the cascaded failure. In this paper, an extensive study of the effect of DG placement and sizing is performed by dividing the system into different zones to obtain a reduced effect of islanding. The siting and sizing of DG is carried out to improve the overall voltage profile or/and reduction in active power loss using two stage Genetic Algorithm (GA). In the first stage a basic knockout selection is considered and the best population is taken for next stage, where roulette selection for crossover and mutation is performed for optimal placement and sizing of DGs. The effect of the islanding, due to load variations is reduced by optimal siting and sizing of DG. The effectiveness of the proposed scheme is tested on the IEEE 33 and 69 radial bus systems and the results obtained are promising.

• BMB Reports
• /
• v.34 no.4
• /
• pp.310-315
• /
• 2001

The uneven distribution of acidic and basic chitinases in different parts of rice seed, and also the characterization of hull-specific chitinases, are reported here. After extraction of chitinases from polished rice, bran, and rice hulls, the chitinases were separated into acidic and basic fractions, according to their behavior on an anion exchanger column. Both fractions from different parts of rice seed showed characteristic activity bands on SDS-PAGE that contained 0.01% glycol chitin. The basic chitinases from rice hulls were further purified using chitin affinity chromatography. The chitinase, specific to rice hulls (RHBC), was 88-fold purified with a 1.3% yield. RHBC has an apparent molecular weight of 22.2 kDa on SDS-PAGE. The optimal pH and temperature were 4.0 and $35^{\circ}C$, respectively. With [$^3H$]chitin as a substrate, RHBC has $V_{max}$ of 13.51 mg/mg protein/hr and $K_m$ of 1.36 mg/ml. This enzyme was an endochitinase devoid of ${\beta}$-1,3-glucanase, lysozyme, and chitosanase activities.

• Smart Structures and Systems
• /
• v.21 no.5
• /
• pp.601-609
• /
• 2018

The estimated probabilistic model of wind data based on the conventional approach may have high discrepancy compared with the true distribution because of the uncertainty caused by the instrument error and limited monitoring data. A sequential quadratic programming (SQP) algorithm-based finite mixture modeling method has been developed in the companion paper and is conducted to formulate the joint probability density function (PDF) of wind speed and direction using the wind monitoring data of the investigated bridge. The established bivariate model of wind speed and direction only represents the features of available wind monitoring data. To characterize the stochastic properties of the wind parameters with the subsequent wind monitoring data, in this study, Bayesian inference approach considering the uncertainty is proposed to update the wind parameters in the bivariate probabilistic model. The slice sampling algorithm of Markov chain Monte Carlo (MCMC) method is applied to establish the multi-dimensional and complex posterior distribution which is analytically intractable. The numerical simulation examples for univariate and bivariate models are carried out to verify the effectiveness of the proposed method. In addition, the proposed Bayesian inference approach is used to update and optimize the parameters in the bivariate model using the wind monitoring data from the investigated bridge. The results indicate that the proposed Bayesian inference approach is feasible and can be employed to predict the bivariate distribution of wind speed and direction with limited monitoring data.

• Journal of Distribution Science
• /
• v.17 no.5
• /
• pp.5-17
• /
• 2019

Purpose - This study aims to exploratorily analyze relationship among pressure on business failure, social safety net perception, and entrepreneurial intention targeting potential business founders - pre-entrepreneurs and re-entrepreneurs. Research design, data, and methodology - Out of 450 collected surveys, 386 were used for analysis. Among these, 216 were from pre-entrepreneurs and 170 were from re-entrepreneurs. Frequency analysis, reliability and validity analysis, and regression analysis were performed. Results - In analysis of pre-entrepreneur and re-entrepreneur's pressure on business failure and social safety net perception, objective environment perception - a subfactor of social safety net perception - had statistically significant difference between the two potential entrepreneur groups. Conclusions - We categorized potential entrepreneurs into pre-entrepreneurs and re-entrepreneurs. Also, the current study suggests importance of social safety net to vitalize food service business startup by validifying its mediating effect between pressure on business failure and attitude towards restaurant business establishment. This research also established groundwork for future studies on ways to improve entrepreneurial intention or startup business sustainability by deducing social safety net perception difference between pre-entrepreneurs and re-entrepreneurs. This study was able to analyze relationship between those two groups in terms of entrepreneurial intention and startup business sustainability.

• Journal of Distribution Science
• /
• v.17 no.4
• /
• pp.51-57
• /
• 2019

Purpose - This study aims to improve the distribution structure of the OLED market and develop cost-effective optimization techniques. Specifically, it is a study on the optimization of ferric chloride to improve the etch of SUS MASK for OLED. Research design, data, and methodology - Applying the optimal conditions of the experiment, the final confirmation was evaluated for improvement by the Process Capability Index (Cpk). It is possible to derive social performance such as improvement of precision of SUS MASK manufacturing, economic performance such as defect rate, reduction of waste generation and treatment cost, technological achievement such as SUS MASK production technology, improvement of profit structure of technology development and process improvement do. Results - The improvement of the Cpk before the improvement was made was confirmed to be 0.57% with a defect estimate of 25.07% with a failure estimate of 0.57% after the improvement, and 8.84% with a failure estimate of 0.57% level after the improvement. Conclusions - If the conclusions obtained from the specimen experiment are applied to the manufacturing process of SUS MASK, it will be possible to expect excellent cost-effective competitiveness due to the improvement of precision and reduction of defect rate to enhance the OLED market penetration.

• Asian-Australasian Journal of Animal Sciences
• /
• v.4 no.1
• /
• pp.99-102
• /
• 1991

To determine effect of time after feeding on distribution of digesta in the gastro-intestinal tracts of sheep given orchardgrass hay once a day, a total of fifteen ewes (mean live weight $51{\pm}12kg$) were slaughtered at 2, 8, 16 and 24 hours after feeding. Contents in the reticulo-rumen, omasum, abomasums, small intestine, cecum, and colon and rectum were totally collected and weighed. Weights of digesta in the reticulo-rumen were about 6 kg which contributed about 75% of the total in the whole tracts. Digesta on dry-matter basis totaled about 1 kg. The dry-matter concentration of digesta in the whole digestive tract was about 107 h/kg of fresh digesta. Distribution of moisture in the digestive tract changed in parallel with that of fresh digesta. There was no significant correlation observed between time after feeding and weights of digesta in the gastro-intestinal tracts. While, feed intake significantly correlated with digesta in the reticulo-rumen, cecum and whole tracts (p<0.01). Thus, time after feeding was inferred to have no influence upon the content of digesta in the digestive tract, but feed intake influenced on the content of digesta in the digestive tract at a low level of feeding.

• Communications of the Korean Mathematical Society
• /
• v.17 no.3
• /
• pp.535-540
• /
• 2002

Let X$_1$, X$_2$‥‥,X$\_$n/ be n independent and identically distributed random variables with continuous cumulative distribution function F(x). Let us rearrange the X's in the increasing order X$\_$1:n/ $\leq$ X$\_$2:n/ $\leq$ ‥‥ $\leq$ X$\_$n:n/. We call X$\_$k:n/ the k-th order statistic. Then X$\_$n:n/ - X$\_$n-1:n/ and X$\_$n-1:n/ are independent if and only if f(x) = 1-e(equation omitted) with some c > 0. And X$\_$j/ is an upper record value of this sequence lf X$\_$j/ > max(X$_1$, X$_2$,¨¨ ,X$\_$j-1/). We define u(n) = min(j|j > u(n-1),X$\_$j/ > X$\_$u(n-1)/, n $\geq$ 2) with u(1) = 1. Then F(x) = 1 - e(equation omitted), x > 0 if and only if E[X$\_$u(n+3)/ - X$\_$u(n)/ | X$\_$u(m)/ = y] = 3c, or E[X$\_$u(n+4)/ - X$\_$u(n)/|X$\_$u(m)/ = y] = 4c, n m+1.

• Journal of Power Electronics
• /
• v.18 no.3
• /
• pp.757-765
• /
• 2018

This paper deals with the instability and resonant phenomena in distribution systems with multiple grid-connected inverters with an LCL output filter. The penetration of roof-top and other types of small photovoltaic (PV) grid-connected systems is rapidly increasing in distribution grids due to the attractive incentives set forth by different governments. When the number of such grid-connected inverters increases, their interaction with the distribution grid may cause undesirable effects such as instability and resonance. In this paper, a grid system with several grid-connected inverters is studied. Since proportional-resonant (PR) controllers are becoming more popular, it is assumed that most inverters use this type of controller. An LCL filter is also considered at the inverters output to make the case as realistic as possible. A complete modeling of this system is presented. Consequently, it is shown that such a system is prone to instability due to the interactions of the inverter controllers. A modification of PR controllers is presented where the output capacitor is virtually decreased. As a result, the instability is avoided. Simulation results are presented and show a good agreement with the theoretical studies. Experimental results obtained on a laboratory setup show the validity of the analysis.